Dee February 01, 2013 for Model Number GSD2000G00WW I just want to make sure that for my model I have to buy both the roller and the axle. My rollers are fine. I only need the bottom front four axles, if I can order just those parts. I saw a GE part axle listed on the internet without roller, but wasn't sure it was for my model. Does that exist or do I have to buy the set?
1 Answer Hello Dee, The axles for your unit are not availble separately. You would need to order the Lower rack roller kit WD12X271 Read More...
Jeff January 28, 2013 for Model Number GSD5900G03WW Hi. I need the front wheel assemblies only. The wheels are okay but I need to replace the part that holds them to the rack. It's impossible to determine on your site rather I need new studs or new axels or 4 new roller kits. Please advise with part #'s.
1 Answer Jeff, the lower rack front wheel only comes available with the axle and wheel in a kit as part number WD12X271. Thanks! Read More...
Jill W. January 16, 2013 for Model Number GSD2200G02BB We just moved into a home rental and the GE Nautilus dishwasher in here is missing the bottom rack, 2 front wheels. Do you have these and if so, can you tell me what part number I need? Thank you!
Thomas B. January 04, 2013 for Model Number MDB8600AWB I need replacement studs for the middle rack wheels
1 Answer Hello Thomas. The manufacturer doesn't offer the studs for the wheels separate from the rack adjuster. We will need your serial number to provide you with the correct adjuster replacement. Thanks! Read More...
Ce October 14, 2012 for Model Number GE Profile Model #PDW868ONOOSS Looking for the correct wheels for the bottom rack as they have all broke. Will need the kits to repair correctly, not just the wheels. Having problems finding which kits are the corrects ones for this dishwasher. Thank you.
1 Answer CE, you will need the dishrack roller stud/axle WD35X21041 and the dishrack roller WD35X21041. Each item comes one per package. You will need to order the qty needed. Thanks! Read More...
Vman May 15, 2012 for Model Number GSD4030Z07WW Dishwasher If I order this part, does it come with all four front wheels for bottom rack? I am thinking of replacing all four in the front. Thanks for your answer.
1 Answer Hello! The lower dishrack roller kit WD12X271 comes with one roller and one axle only. Thanks! Read More...
Dparker77493 January 02, 2012 for Model Number Kenmore 36314071792 My upper dishwasher rack keeps dropping down because the little rollers inside the glides are broken. I can pop the straight part back in the roller but they keep popping out. Also, one of the glides looks slightly bent. Can I replace just one of the glides & when I order the rollers that fit inside the glides, do they come as a pack of 4 or do I need to order 4 individual ones? Would I need to order end caps for both of the glides or can these be salvaged (taken our & put back on) after I install the little wheel inside the gliders?
1 Answer Dparker, The upper rack roller kit WD12X10327 is a packaged kit (4 roller assemblies) . Make sure you snap and lock the rack retainers on the axle, tightly on the rack. I would not expect you to need a rack glide arm, but WD30X98 is the part number for the metal rack slide, and they are the same on each side. Thanks and Good Luck Read More...
Fran September 30, 2011 for Model Number PDW7880G00SS All my wheels on the lower rack fall off. I think the wheel clip has gotten too loose. Is there anyway to keep them on permanently? What kind of wheel/clip do I need? Also a couple have adhered to the hot coil. Can I replace the coil or do I need a repairman? Thanks!
1 Answer Fran, You could do all the work yourself, it wont be all that easy for the heater element WD05X10010, you may have to remove the dishwasher to access the mounting nuts in the rear bottom under thhe tub. You will need to order several parts for the rack roller : the rack roller stud WD35X21041 and the roller WD35X21038 one of each, for each loose, broken or damaged rack roller. You will also want to have a pair of pliers handy, so when you "snap" the roller stud in place on the rack, you can make sure the retiner clip on the stud "snaps ' and locks , solidly in place. Good Luck and Thanks Read More...
Katherine B. August 16, 2011 for Model Number maytag steam. The display buttons do not repond. Some of them lite for a short time, and then go off. What is the problem?
1 Answer Hello Katherine. We will need your model number to help you with this. Thanks. http://www.appliancepartspros.com/modelnumber_locator.aspx Read More...
Tom H. July 10, 2011 for Model Number GSD2220F00BB My unit has 6 wheels and I was wondering if the axles are sold seperately?
1 Answer Hello Tom! The front and rear rollers on the lower dishrack as different than one another. For the front you may use part number WD12X271, the axles are not available separate. For the rear you may use part number WD35X21038, the axle is available separate as part number WD35X21041. Thanks! Read More...