Rob September 29, 2020 for Model Number LFC25760ST When I open the refrigerator doors the temperature display board in the refrigerator shows 888 for both the freezer and fridge temperature. Pressing the buttons to change the temp doesn't do anything. When the doors are closed the display turns off but when you open the doors again it still reads 888 for both temps. The fridge portion is very cold, even freezing some things in that compartment. Is the temp control board the most likely suspect or would there be something else that isn't allowing the temperature settings to be changed? Thanks in advance.
1 Answer Rob, the 6871JB1374B Pcb Display Board is the more likely issue. You may want to access the display board and check for any loose wires or connections and corrosion or moisture on the connector pins on the board or in the harness connector. You also want to check the "mini" buttons on the display board, they can fail relatively easy. Thanks, Read More...
Pete February 23, 2018 for Model Number LFC25760ST My control box fell off as a result of melting it seems. It looks like I need to replace the whole thing. It seems I need to buy several parts separately - PCB assembly display (AP4439660), case display (ap4437130), cover display (ap4437169) and decor, control (ap4439964). Do these come already assembled for my LG model? Do I need an electrician to assemble or can I do it myself if I order all parts separately? Thanks
1 Answer Hello Pete, These parts are individual but most do-it-yourselfers are able to assemble them in the unit. Read More...
Rick April 11, 2016 for Model Number LFC25760ST Lights in refrigerator won't work. I was told I need a new control board but don't know what part it is.
Teeter979 April 10, 2016 for Model Number LFC25760SB Recently my refrigerator display went out and I can no longer adjust the temperature. It's extremely cold and my food is freezing. Prior to this I had experienced the well known issue of the interior lights staying on, but just solved it by removing the light bulb. I understand that the light issue can be fixed by replacing the control board. Will this also fix the display/temp adjustment issue, or do I need to replace the display control panel?
1 Answer Hello Teeter979, This sounds like a power supply/relay issue on the control board 6871JB1423N. Read More...
Bi January 02, 2016 for Model Number LFC25760SB The lights remain on in the refrigerator when the doors are closed. I have replaced the switches on both doors and the problem was not resolved. Can you please tell me what is causing this problem?
1 Answer Bi, For the issue with the lights staying on when the door is closed, you will want to replace the main control board of the unit. The part number for the control board is 6871JB1423N. Read More...
Catharine September 05, 2015 for Model Number LFC25760ST I purchased the display case which needed to be replaced. How do I remove the power assembly from the old display case and the touch screen from the old display case?
1 Answer Hello Catharine, Remove all shelves in the refrigerator, than remove the Refrigerator control Box by loosening 2 screws. 2. Remove the Refrigerator Control Box by pulling it downward. 3. Disconnect the lead wire on the right position and separate the lamp sockets. 4. Replace PCB assembly. 5. Reinstall in reverse order. These are the directions from the manual. Read More...
Russ April 30, 2015 for Model Number LFC25760SW The number printed on my PCB is 6870JB8199A. VER. 2 05.02.04. I assume the part you have replaces that part number. Can you confirm that? Thanks.
1 Answer Russ, based on the model number given the replacement pcb display assy is part number 6871JB1374B. Thanks! Read More...
Jonathan January 25, 2015 Where are the 2 screws on the display panel on a 25760sw? I have the 2 tabs out on the rear of the assembly but cant find the 2 screws referenced in the previous answers. The 2 tabs are out but it wont move other than that and I dont see any screw heads.
1 Answer Hello Jonathan, If the model number you have is LFC25760SW, the light lens has to be removed and the retaining screws are threaded up toward the ceiling. You may have to lean in and look straight up to see them. Read More...
Jeff August 10, 2014 for Model Number LFC25760ST The refrigerator kept changing the temp on its own (kept getting colder and would freeze stuff in the refrigerator) and sometimes u could not change it back right away (you would push the button and it would do nothing). Would this part fix that problem?
Tom May 10, 2012 for Model Number LFC25760SB I have purchased the case display and need to know how to remove the PCB assembly display as well as the front screen where the push button display is....?
1 Answer Hi Tom. 1. First, remove all shelves in the refrigerator, than remove the Refrigerator control Box by loosening 2 screws. 2. Remove the Refrigerator Control Box by pulling it downward. 3. Disconnect the lead wire on the right position and separate the lamp sockets. 4. Replace PCB assembly AP4439660. 5. Reinstall in reverse order. Thank You. Read More...