Phyl August 19, 2022 for Model Number NE59J3420SS/AA A part of the digits on the clock are missing all of a sudden on my 6 year old stove. I want to replace only the LED clock part but I can't find one for my model. Or would it have to be the whole control board? (already replaced the membrane; that wasn't it.)
1 Answer John, If the display is not lighting up then check to make sure that there is 120 Vac to the display and if there is then the display would need to be replaced. Read More...
Paul August 11, 2021 for Model Number Samsung Range NE59J7630SS The display panel is not showing some number segments and is gently flashing background lights. Is there a control panel or wiring that can be replaced to fix the digital readout? Thanks! Paul
1 Answer Paul, this could be a failure in the main control DE92-03761B or in the display DE07-00129A. If the wires connecting the two are fully secured and do not have any breaks, the most likely failure would be the digital display. Read More...
Rachel Mcmillion July 26, 2020 for Model Number FER300SX/XAA My oven will heat and do fine 1 time. Then the next time after 20 minutes the oven fully shuts off. The digital displays resets like power has been turned off totally. Then a minute or two later the Display will light back up but the oven has to be turned back on. The stove top works fine during this entire process. Part 2. My front fast boil eye is like it’s on high heat no matter what I set it on. What parts would I need? Thank you in advance
1 Answer Rachel, The main control board on this unit will most likely be the issue with the unit shutting down. Read More...
Angie October 25, 2019 for Model Number Samsung FER300SX/FER300SW/FER300SB Electric Range I am a Home Ec. teacher and have four Samsung Electric Ranges with segments of the LED displays not lighting. As you can imagine, it's kinda hard working with high school students who can't read the temperature setting! At any rate, I can replace the parts myself; however, I'm not sure whether I need the entire main PCB panel or if there is a less expensive LED chip option that can be replaced. Which part number should I order?
1 Answer Angie, for the model FER300SX, FER300SW, and FER300SB the control needed is part number DE92-03045B. Unfortunately, the LED is not available separately from the control board. Read More...
Ern July 11, 2019 for Model Number FE-R300SX The last digit of the numbers for temp/time on the digital display doesn't always light up completely. What part do I need in order to repair this problem?
1 Answer Ern, The part that would be needed for this issue will be the main control board DE92-03045B. Read More...
Sue July 07, 2019 for Model Number Fe-r300sx Every time I turn the oven on the broiler comes on and it gets extremely hot very fast. What is causing this?
1 Answer Sue, you may want to inspect the element and test it for any grounded out connection by disconnecting the power cord and testing for continuity to the oven chassis. If there is a grounded connection, it will need to be repaired. If the broil element DG47-00037A itself is grounded, then it would need to be changed out. If there are no grounded connections, then the most likely issue would be the relay control DE92-03045B has a stuck relay. Read More...
Holly June 18, 2018 I have an FE-300SB-XAA. The display unit only partially lights. What do I need to replace? The stove and cooktop function, but very difficult to know the proper temp settings.
1 Answer Holly, This issue would most likely be caused by a faulty main control board DE92-03045B. Read More...
Pete M May 29, 2018 for Model Number NE59J7850WS/AA Digital display on Samsung range is partially not working. Do I need a pcb or an LED display part? Can you provide part numbers?
1 Answer Pete, With the display partially showing then you would need to get the DIsplay LED DE07-00130A. Read More...
Tom B April 17, 2018 for Model Number FE-R300SX/XAA The digital clock does not display much of anything, just a few bars light up. What do I need to fix this ? thank you
1 Answer Tom, The part that you would need for this issue would be the main PCB DE92-03045B. Read More...