James S March 09, 2016 for Model Number RF260BEAEBC/AA-0001 I need an ice maker for my refrigerator. Can you help?
1 Answer Hello James. Based on the model number you provided, you will need to order DA97-07603B for the icemaker needed. Read More...
1 Answer Hello Len. Make sure the freezer is between 0° and 5°. You need to check and see if there is power going to the water valve when the icemaker cycles. If so, replace the water valve on the unit. If not, or the icemaker does not cycle, you will need to replace the icemaker on the unit. Also, check and make sure the fill tube on the unit is not frozen and clogged. If so, replace the water valve and thaw out the fill tube. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html Read More...
Fred November 06, 2015 Just replaced ice maker da97-05422a. Do I need to push the test button to start making ice. How long after it is installed should I wait to see if its making ice.
1 Answer Fred, You would not need to push the test button to get the icemaker to cycle. It is recommended to allow 24 hours to see if it makes ice but may see ice within 5 to 6 hours. Read More...
Ewart R October 14, 2015 for Model Number Samsung Side by Side refrigerator model # RS25H5002SL I recently purchased this refrigerator and would like to hookup the supply water line for the icemaker , other models have a screw type connection for the connection but this model does not, however I am seeing a 1/4 inch white plastic tubing with a grey cap ,am i right in assuming that this the tubing to connect the water supply? please advise.
Wayne June 17, 2015 for Model Number RFG297AARS/XAA I just received the New ice maker I ordered. Using the model number to place the order came from my inside of Frig by door. Ordered on line using my model number. My old ice maker is a 9 cube tray, I was sent 7 cube tray/DA97-05422A. This appears to me to be the wrong icemaker, if I had a 9, why would they send us a 7 cube tray?
1 Answer Hello Wayne. According to Samsung, DA97-05554A is the correct icemaker. If you look on your old icemaker there should be a part number. You can use that number to cross check the parts. If it comes up with this number, then the manufacturer has changed it from a 9 to a 7 cube. Thanks. Read More...
Joe L. April 08, 2015 for Model Number RF263BEAESR/AA-0000 This refrigerator has stopped making Ice. Do I have to replace the ice maker?
1 Answer Hello Joe, If the temperature is running about 0°F to -2°F, the ice maker DA97-15217D will have to be replaced. Read More...
Ken M February 27, 2015 for Model Number rfz6vabwp Ice maker makes ice, but will dump onto dispenser when press for ice.
1 Answer Ken, If when pushing the ice lever to get ice the ice, if the ice is being crushed then it is normal for shavings to not make it into the cup if you do not hold the cup all the way up. If cubes are going all over the place then you would want to check to make sure that the funnel is in place. Read More...
Nathaniel S. August 18, 2014 for Model Number imc701 How do I disassemble my ice maker? It is not working.
1 Answer Hello Nathaniel, I'm sorry but, the manufacturer supplies no replacement parts for the icemaker since they consider it an unserviceable part. For this reason, no training or documented information is supplied on the icemakers' dis-assembly or repair. If problems are encountered, it is recommended to replace the icemaker as an assembly. Read More...
Rodney F May 30, 2014 for Model Number RF267AARS I just replaced the ice maker and circuit board on my frige and Its still not making ice how do I know if its getting water to the ice maker I get water to the in the door it works great but I am not getting ice. Can someone help. Thanks Rodney
1 Answer Rodney, To check to see if water is getting into the icemaker you would need to feel to see if there is ice in the icemaker. There is also a test button on the side of the icemaker that will allow you to put the icemaker into a cycle. If there is no water to the icemaker then it could be that the water valve is faulty and would need to be replaced. Read More...