Kyle C January 12, 2017 for Model Number RS277ACPN/XAA-0000 I bought the new ice maker from you and installed yesterday. It makes ice but will not automatically dump ice. I have to use the reset button on the new ice maker. It fills with water and cycles thru after testing but will not continue on its own. Any thoughts?
1 Answer Kyle, With the icemaker having to be manually cycled, this would most likely be caused by a faulty main control board that is not reading the sensor properly. Read More...
Jean December 30, 2015 for Model Number RS267LBBP Ice is forming on the ice maker and seems to make huge cubes and they are hard to get out. We are on our 3rd ice holder assembly and there is ice hanging on the ice maker what do we need to get to fix this and is there a video that can be watched on how to fix?
1 Answer Hello Jean, This will either be the water valve DA62-00914B or the contacts in the icemaker DA97-02203G are sticking. Read More...
Jose November 30, 2015 for Model Number SR-SD20DTD My refrigerator is 220 V, and the ice maker is not working properly,what part number must I buy? It's impossible to see the part number on the ice maker, only in control I could see "NTGTt001TA1", 12 Vdc Regards, Jose Antonio
1 Answer Jose, Unfortunately we would not have any icemaker that would work for 220 vac units and you would want to contact a international supplier. Read More...
Don Mcneil January 18, 2015 for Model Number samsung rs275 I have a samsung side by side rs275 that the ice make is making ice but the ice will not drop. will p/n AP4326210 replace the complete icemaker?
1 Answer Don, Yes, icemaker part number DA97-02203G will replace the complete icemaker assembly for your unit. Read More...
Jose June 05, 2014 for Model Number RS2350BSH Hello, I have a Samsung RS2530BSH and the ice maker seem not to work properly. It does make ice but is not dumping it into the tray. I do have running water to the dispenser but since the ice is not dumped to the tray it just freeze in the tray. Thanks
1 Answer Hello Jose. If the temp in the freezer is between 0 and 5°, you will need to order and replace the icemaker on the unit. Read More...
Bryantech March 24, 2014 for Model Number rs2530bsh I have a rs2530bsh. The ice maker doesn't get water. The door does. The ice maker doesn't move. I have tried the black reset button on the bottom of the icemaker. The compressor was replaced about a year ago. The fridge was unplugged and in storage for about 7 months.
1 Answer Hello Bryantech. If there is power coming to the icemaker, and it does not cycle when you press the button, you will need to replace the icemaker on the unit. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html Read More...
Frosty November 18, 2013 for Model Number rf265ab The bottom drawer freezer fills with frost and the ice maker still produces ice that turns to a block in the bucket. I have found a tube, with a little rectangle at the end, loose and a foam piece that holds it is disconnected. Where do they go and will this fix the problem?
1 Answer Hello Frosty. You need to look for warm air coming into the unit and causing the issue that you are dealing with on the frost issue. If you fined the entry point, you will locate where the parts go. It may be the fill tube for the icemaker. Read More...
Jane October 22, 2013 for Model Number RS2630SH My ice maker has been working fine and all of a sudden stopped working. There is ice in the tray but it will not dump. What do I need to do to fix this problem?
1 Answer Hello Jane. If there is ice in it and it does not dump, you will need to order and replace the icemaker DA97-02203G. Read More...
Evelyn T August 04, 2013 for Model Number RFG297AARS Frig is less than 5 yrs old. Ice maker has never worked efficiently. The compressor was replaced this spring, the repair man thought this would fix the ice maker problem. They have now replaced the ice maker and still NO ice at all. The original ice maker made some, sometimes. Now they told us we need a new computer chip. What sounds correct, and how much more do I need to pay and do to have a functioning ice maker? I already know I will never buy or recommend a samsung appliance.
1 Answer Evelyn, You will want to check to see if water has run into the icemaker and that the ice has formed. If it has and will not eject unless pushing the test button then the control board is faulty and would need to be replaced. Read More...
1 Answer Hello Marie. Based on the information you provided, you need to order and replace the icemaker in the unit. Read More...