John July 05, 2016 for Model Number RSG257AARS/XAA-0000 I have a Samsung refrigerator Model RSG257AARS side by Side. The Ice maker stops making ice only after the ice fills to the top I can get it to restart by pressing the reset button than ice is OK until the ice fills to the top and again I have to reset the icemaker. I have replace the ice maker Same problem what else could cause this?
1 Answer Hello John. You need to check and see if the feeler arm is hitting anything in the bucket. It should turn the icemaker back on once the level of ice has dropped back down from normal level. Read More...
Leon C May 02, 2016 for Model Number RSG257AAWP/XAA Refrig. Does not cool, on either side. When pushing buttons for self test, work intermittently. Compressor is running ok.
1 Answer Leon, With the unit not cooling in either section then this will most likely be a sealed system issue since the compressor is running. Read More...
Pete April 23, 2016 for Model Number RSG257AABP/XAA The display lights, but the temperature digits are missing digit lines and certain button functions such as the ice cube, lighting, and power saver do not light. Do I just replace the PBA Display-LED Panel to fix this?
1 Answer Pete, For lights not being illuminated or not working at all on the display then yes you would replace the PBA Display DA41-00522A. Read More...
Terry May 20, 2015 for Model Number RSG257AAWP/XAA Ihe ice machine will not harvest. It fills the mold with water and freezes it ok. The temp of the freezer is -1 push the test button and it will dump the ice cubes that were just made. I have checked the over several days giving it a lot of time to make ice but it still will not harvest. It is turned on but the display is hard to read it needs replacing as well. It does not show weather the ice maker is on or off.
1 Answer Terry, If the icemaker is on and it is not cycling then the most likely cause will be a bad thermistor on the icemaker and you will need to replace the icemaker. Read More...
Sarah H March 31, 2015 for Model Number RSG257AARS For some reason the top is still holding on. anymore suggestions
1 Answer Sarah, If you have gotten the bottom of the display out then you will need to pull a little harder to get the top out or slide something up the side, preferable to be something plastic that will not scratch the finish, to pop the top loose. Read More...
Sarah March 26, 2015 for Model Number RSG257AARS How do you remove the old LED panel off so I can replace it with the new panel DA41-00522A
1 Answer Sarah, To remove the control to replace it you will remove a screw from underneath the dispenser display. Insert a flat blade screwdriver into a slot on the left side and pull out the dispenser cover. Read More...