Glen July 08, 2017 for Model Number RS2533SW I just received a new ice cube tray and bracket because the tray broke the large bracket housing, which makes the ice not disperse and water dumps into the ice bin. The new tray is not the same square orig. tray, so the sensor does not clip on to the new oval ice shaped tray. My orig. tray does not disperse ice completely so that's why I order a new tray from RepairClinic.com. (They were not helpful at all and simply said "sorry".) Do you sell the clip/foam that connects to the newer oval-shaped tray so I can attach the sensor to it?
1 Answer Glen, This ice cube tray is showing as being the correct part number DA63-01453B. If the ice is not completely coming out of the tray and is overfilling due to this then the tray would be the issue but also make sure that the freezer temperature is not too cold. We are not showing that there was a design change to this part but if it will not work then it would be recommended to replace the assembly DA97-00258J. Read More...
Eduardo December 19, 2016 for Model Number RS26DDAPN Which ice cube tray match with this Samsung model please
1 Answer Hello Eduardo. Sorry, this is an international model and we do not offer any parts for these. Read More...
Fernán March 20, 2016 Do you have in sale the gears that go inside the NTGT001TA1 ice tray turner box for the DA97-00258A icemaker?
1 Answer Hello Fernán. No, you will need to replace the icemaker if the gears are bad. Thank you. Read More...
Richard August 24, 2015 for Model Number RS2544SL I ordered an ice treay replacement for this model Samsung but the tray received is 9" long. The one that was in the ice maker is 7-3/4" long and contains 7 cube spaces. What is the correct part number for this 7-3/4" 7 cube tray? PS. On the bottom of the ID lable it has BOM XAA does this make a difference?
Jim B June 27, 2015 for Model Number RS267LBSH/XAA-0000 I need the icemaker tray only! This is the icemaker model # NTGT001TA1 Do you have the tray, it is an 8 cube tray.
Juan April 21, 2015 for Model Number RS2555SW The ice tray on my ice maker cracked/broke so I ordered a new one recently from your website. The original ice tray is longer by an inch and has space for 8 ice cubes. The one I got from you guys and the one I see on the samsungparts.com website has space for 7 ice cubes and is obviously shorter so it will not fit. You advice is greatly appreciated. Thanks.
Chris R September 22, 2013 for Model Number samsung rs2533sw I recently purchased some parts for my unit. The ice tray I purchased is a fit for my unit, but not an exact match. Difference being the old ice tray made ten smaller cubes with the sensor mounted to the center of the tray the newer ice cube makes 7 larger cubes with the sensor mounted to the end closest to the motor. The cubes are not freezing completely and when the tray twists to release the cubes they crack releasing the water from the center producing a frozen mass in the bin. Are there any settings I can adjust to limit the amount of water or extend the freeze time to remedy this? Thank you, Chris R
1 Answer Chris, There are not any settings that can be changed to get the unit to not cycle as fast other than temp settings. You will want to make sure that the temperature is set for the manufacturer recommended and not any colder. If you put it past the -2 it will cause the unit to cycle the icemaker quicker because the icemaker is designed for a certain resistance reading. If this does not correct then the control board may be getting an improper signal from the icemaker and may require the control board to be replaced. Read More...
Juan A. R December 31, 2012 for Model Number rs261mdbp Do they make a tray to purchase for were the water is dispensed to catch the water drip on the bottom were the glass is put at so water wont just lay there.