Richard December 17, 2020 for Model Number 11020232711 Can I use the softer dispenser cap AP6038783 on my model?
1 Answer Hello Richard, Softener Dispenser 63580 appears to be the one that will work with the agitator in the model number provided. Read More...
Ashley September 20, 2020 for Model Number ATW4475VQ0 does my washer have a softener dispenser if not can I buy one to replace the original?
1 Answer Ashley, Based on the model number provided your machine did not come with the softner dispenser. However, I can't say it will or will not work, but this part 63580 if it would work would go in place of the agitator cap. Read More...
Guy March 30, 2020 for Model Number Crosley Model# VAW3584GW1 I would like to take the cap off and replace it with a fabric softener dispenser. I need a part number if possible. Thanks
Levi October 16, 2019 for Model Number Kenmore 11020232711 Is there a fabric softener dispenser to replace the agitator cap on my washing machine? Model number 11020232711
Susan August 14, 2019 for Model Number NTW4516FW3 Amana washer part # for fabric softener dispenser for this model
Jay April 13, 2019 for Model Number roper rtw4516fw1 Which part could I use to replace the agitator cap and add a softener dispenser?
Laney June 20, 2017 for Model Number WTW5300SQ0 I'm trying to figure out if my washer has a fabric softener dispenser anywhere on it because I can't seem to find it if there is one. There's a solid cap on the agitator which I thought may be the dispenser, but when I take it off and add softener it just pours right out of the little holes above the dust cap (which I just learned what that was from one of your videos a few minutes ago!) Does my washer have a dispenser? If yes, where can I find it? If no, am I able to get one for it? I know it's an old model (I bought it from Lowe's in March 2007). Thank you for your help!
1 Answer Laney, There is not a fabric softener cup on this model but if you want one you could use part number 8575076A. Read More...
Helen January 21, 2013 for Model Number roper rtw4640yqo Could a sock go under the agitator and if yes can it be removed easily or can it be left?
1 Answer Hello Helen, A sock can go under the agitator but I doubt it would go all the way under. If so, you can remove the softener dispenser, (it just pops off), and use an ratchet, extension, and a 7/16" socket to loosen the agitator. It shouldn't have to be completely removed, just raised up so the stuck item can be removed. If items continue to get stuck, the drive block WP389140 should be checked for wear and the spanner nut checked for tightness. Read More...
Karen R. July 13, 2011 for Model Number RAS7133KQO When my washer comes to the rinse and spin cycle, it stops working. It woun't drain or spin.
1 Answer Hello Karen. You will need to check the lid switch 3949247V and see if it is broke or bad. If so, it can cause the problem your having. It should read closed for continuity with the lid closed. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. Hope this helps.http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html Read More...
George June 27, 2011 for Model Number WTW5200SQO Purchased washer used. Where do you pour softner in and how does it work? It looks like it goes under agitator cap, but there are holes on the side and it doesn't hold a level. Thanks.
1 Answer Hello George! Here is a link to the owners manual to your product. This will have information on how to use the product. Thanks! https://www.whirlpool.com/digitalassets/MLPDF/Use%20and%20Care%20Guide%20-%20W10150595.pdf Read More...