Billy June 02, 2013 I have a roper washing machine and the the shaft that turnes the agitator turns but the agitator dosnt turn. so what do i need to fix this problem ?
1 Answer Billy, If you can rotate or move the bottom portion of the agitator. You'll need to replace the agitator 285574 the splines are stripped. if the upper portion(cork screw) of the agitator moves in both directions then you can repair the agitator with the agitator repair kit 285811 Read More...
Bobby January 30, 2013 for Model Number TAWX700JQ1 CAN I CHANGE THE DOUBLE ACTION AGITATOR TWO PIECE TO A SINGLE ACTION AGITATOR ONE PIECE IF SO WHAT IS THE PART NUMBER? THE SERIAL# IS CP2762049 THANKS VERY VERY MUCH !!!!
John December 03, 2012 for Model Number Whirlpool LBR5133AWO When the machine is agitating, I can lightly grab on to one of the bottom fins and stop the agitator from moving. Once I let go it starts moving again. Do I need the complete agitator assembly or something that is under the agitator assembly? I can not tell from the exploded view what the agitator assembly connects to.
1 Answer Hello John. If you can stop the bottom of the agitator, you need to remove it and see if the splines are stripped out. If not, the transmission is bad and will need to be replaced. If the part you stop is the top part of the agitator, you need to replace the cam kit 285811. Read More...
Ramon May 31, 2012 for Model Number LLR9445DQO These is whirlppol washer machine.The agitator have two parts, the top and botton. Ok the top part don't works when is washing cloths only the botton pat works. Can yow tell me whats the problen is thanks.
1 Answer Hello Ramon. The cam kit 285811 is bad and will need to be replaced on the unit. Read More...
Kathleen February 28, 2012 for Model Number LBR5133AN0 I need to be sure to order the part on the agitator that has the teeth, they are slipping. I have ordered the lower assembly.
1 Answer Kathleen, the teeth are the dogs/cam and you can locate these in the agitator repair kit part number 285811. Thanks! Read More...