Mary S April 25, 2026 for Model Number W11409844D Our ice maker works then stops - it appears the ice try is tipped down, is it stuck?How can we reset it?
1 Answer Mary, Please resubmit your quesiton with the model number so that we can assist properly with your question. Read More...
Tom January 08, 2024 for Model Number WRS32FDAB06 Ice maker arm fails to stay up (latched), and does not stop producing ice when chamber is full. Will not shut off.
1 Answer TOM,Make sure the arm is completely seated in the ice maker. If the issue persists then you will need to replace the ice maker assembly. Read More...
Sam May 08, 2023 for Model Number W11342242 / AP6872223 My ice maker bail arm. part number W11342242 / AP6872223 had a plastic part on it and it broke. I didn't want another one that had a plastic part, so I bought a deeper bail arm that is all stainless steel, but it is bent in the opposite direction as my old one. The arm doesn't go all the way down after ice is dumped. I have bought and installed a new control module, but still have the same problem.
1 Answer Sam, we would only be able to recommend using the manufacturer-recommended parts as any appliance is designed to work specifically with the parts in a model's part listing. Read More...
Jill May 15, 2021 for Model Number WR325SDHZ-SS Just had new Refrigerator installed I notice the ice maker has no metal shutoff arm on ice maker inside. Should there be. Was there a piece they forgot to install?
John February 06, 2021 for Model Number whirlpool fridge wrx735sdbm02 ice maker Ice maker arms stays up after cycle. Can manually lower and then another ice making cycle will occur but arm will stay up. No obstructions, have turn ice machine off and unplugged unit already. Removed arm and made sure it moves freely. Replaced unit 18 months ago with unit from appliancepartpros with no issues until now. Any help is appreciated. Was planning on replacing unit again.
1 Answer John, based on the information provided, the motor of the ice maker WPW10300024 is not rotating fully and just barely holding the arm in place at the upward position. Read More...
Graygirlone December 28, 2020 for Model Number WRS588FIHZ00 wires damaged on bottom of door of freezer. Won't make ice after replacing ice maker. Need replacement part to fix wires. What is the part number.
1 Answer Graygirlone,Unfortunately, you will need to order the door. The part number will depend on the color of the door. The only other option is to wire them back together if there is enough wire showing. Read More...
Mary December 14, 2020 for Model Number WRS571CIDMOI the automatic shutoff arm remains in up shutoff position. I can't manually move it to the down position. Therefore, no ice is being made. HELP
1 Answer Mary, The shutoff arm is not supposed to be down, The way that this icemaker operates is that when the icemaker cycles, the arm will drop down and feel for ice, if the arm makes it all the way down then the ice maker will continue to cycle and it will dump the ice. If the arm doesn't make it all the way down and hits ice before getting down then the icemaker will not cycle the ice out. For your issue, check to make sure that the icemaker is turned to the on position at the control panel. If the icemaker is on then is it filling with water. If it is filling with water but not dumping the ice then a new icemaker would be the most likely thing to replace. If there is no water check to make sure that the fill tube is not frozen and then it will most likely be a faulty water valve causing the issue. Read More...
Ken L December 05, 2020 for Model Number Whirlpool Refrigerator ed2kvexvq The arm in the ice maker doesn't click anymore. The ice maker is stuck in the on mode. What should I do?
1 Answer Ken, Check to make sure that the arm is still in the slot in the back of the icemaker. If it is then this will be a faulty icemaker and the icemaker will need to be replaced. Read More...
Raul October 14, 2020 for Model Number GI6SDRXX07 The ice maker arm is stuck on the Up position. I have pressed on it, but it doesn’t come down. I don’t want to force it. What can I do?
1 Answer Raul, if there is not an item obstructing the arm from being able to drop down, and the arm is fully inserted in the ice maker, then it is likely that the ice maker W10882923 has failed and would need to be replaced. It would be recommended that the ice maker is observed while the door switch is taped in the closed position and that the ice maker is tested for 120 Volts AC from the purple wire to the white wire. If there is voltage, then the ice maker has indeed failed. Read More...
Pamela May 20, 2020 for Model Number WRS571CIDM02 The arm on the ice machine will not work in automatic and produce ice but will work in manual mode. Can you help me?
1 Answer Pamela, If the icemaker is not making ice during normal operation but does when you go into the diagnostics mode then this will be a faulty icemaker that will need to be replaced. The part number for the icemaker will be W10873791. Read More...