Agnes February 02, 2020 Ican't get the tub out. the tub is stuck and wont wash or spin so I took the agitator out but the tub is stuck and won't come out can anyone help me?
1 Answer Hello Agnes, if you would repost your question with the washer's model number then we will be able to find the parts list and be able to assist you. Read More...
Agnes February 02, 2020 I cant get the tub out of whirlpool #LXR7144EQ2 can some one help me? My tub is stuck and won't turn.
1 Answer Hello Agnes, if you are referring to the inner tub, and have removed the agitator and the spanner nut then the inner tub at that point has nothing mechanically holding the inner tub in place , the inner tub rests on the drive block and may have hard water/ detergent residue holding it in place. Usually rocking the inner tub left/right then front /back breaks it free. Read More...
Chas March 14, 2019 for Model Number WP LLR9245DZ To remove the balance ring I assume I have to access the clips on the balance ring. What’s your suggested method? Possibly tapping lightly on the underside of the ring with a rubber mallet? Or maybe not.... More force isn’t necessarily always the solution. Regards, Chas
1 Answer Chas, Yes using a rubber mallet would work but may have to pry a little to get the ring out. Read More...
Chas March 12, 2019 for Model Number WPLL9245DZ Your repair video is on how to replace the tub seal, not the balance ring. I need to replace the balance ring. Your Comment on the Video form doesn’t work.
1 Answer Chas, On this unit there are clips that hold the balance ring in place that you will need to release in order to remove the ring. Read More...
Luis December 08, 2018 for Model Number 7mwt96540 My washer moves a lot, I have replaced several parts trying to fix it however the issue is still there; I am looking to replace the balance ring, however I removed mine to see if there is any leak on it and I dont think there is any since the ring still has the liquid inside, however the washer is around 10 years old, so my question is: could the ring be just bad after all this time even when it does not have a leak? will replacing the ring fix the moves and vibration? Thank you.
1 Answer Luis, The balance ring will not cause this issue if there is liquid in it but this would most likely be caused by faulty pads on the skate plate. It would be recommended to replace the pads part number 285219 and 285744. Read More...
Bert January 05, 2018 for Model Number Rtw4516f Is the liquid in the ring balancer an antifreeze or will it freeze in cold temperatures?
1 Answer Hello Bert, I'm sorry but the solution in the balance ring is a saline solution and will freeze if not inside a controlled climate. It contains no antifreeze. Read More...
Jean I June 28, 2017 for Model Number 11092389200 how do i remove the ring balance wheel on top of the tub. mine is stuck down pretty hard and seems to have retainers around it locking in place
1 Answer Jean, You will have to get between the inner tub and the ring and release the tabs. This may require the inner drum to be removed to get it. Read More...
Jonas July 10, 2015 for Model Number whirlpool LBR2121DWO Is the ring balancer suppose to have s liquid in it, or do I have a leak getting water in it?
1 Answer Jonas, The balance ring is supposed to have liquid in it for balancing purposes. Read More...
Tot April 24, 2015 for Model Number SAMSUNG he .model WA400 Hi . I got a model SAMSUNG he WA400 top load . On the top lid factory where they make kind little bit till down...My question is where do i put the bubble level to make adjustment for balance the machine? Thank you !
1 Answer Tot, When leveling the unit it is best to put the level on a flat spot in the front, rear and sides on the top of the unit. Read More...
Christi H March 24, 2015 for Model Number TAWX700JQ1 I replaced the lid switch (which fixed problem with cycles). Then, replaced the fluid filled balance ring, however, after replacing that, my clothes are now soaking wet (can wring them out) at the end of all cycles. It seems to spin okay though when empty but seems a little loose. Could the balance ring not being on all the way be the cause of the clothes not spinning out correctly or is it something else? I would prefer not to have to replace more parts if it is something simple like that.
1 Answer Christi, While the balance ring could cause the unit to get off balance and cause this issue, you will also want to check the clutch to make sure that there is no wear on it. Also you do want to make sure that the tub ring is not loose. Read More...