Gerry October 26, 2019 for Model Number WFW8300SW00 When replacing front control panel part # wpw10099593, how do you remove the selection knob on front. I have tried pulling it off and it won't budge.
1 Answer Gerry, according to the manufacturer, it pulls straight off, you can sometimes use a flat blade screwdriver to pry it off, working from side to side. Read More...
Mark August 19, 2019 for Model Number WFW8300SW02 The overlay cracked, and now the button for start is missing. Does the control panel assembly W10099593 include both the overlay and the buttons underneath?
1 Answer Mark, the panel WPW10099593 does include the button pads that press into the keys located on the control board WP8571903. If the keys of the control are broken or missing, the control board would need to be replaced as well. Read More...
Bernard K. September 15, 2018 Start button no longer on the machine. The contact on the board will not start the machine. Do I need to order the control panel or board?
1 Answer Hello Bernard, I'm sorry but we will need to ask you to post a new question including the model number from your units' I.D. tag so we can provide a proper diagnosis and recommend parts that can be guaranteed to work properly on your unit. Thank you for your patience and understanding in this matter. Read More...
Gary June 27, 2015 for Model Number WFW8300SW02 I took this panel off and noticed the circuit board behind it had some small star screws that looked like it held the board to the plastic piece. Do these need to be removed or will the two boards come out by just pressing in the tabs? Thanks.
1 Answer Gary, The screws do not need to be removed and the control board will come out when you push on the clips. Read More...
Bobby December 26, 2013 Ref part number AP4260737 on the diagrams it shows this comes with circuit board and wiring harness. So all I have to do is unplug old harness and remove old touch pad and plug new one in?
1 Answer Hello Bobby! No, part number WPW10099593 is the control panel only. It does not include the electronic control or the wiring harness. The diagram image is to give you a brief idea of the location of the part. The images of the control panel is what you will receive. Thanks. Read More...
Rick October 22, 2013 for Model Number wfw8300sw04 whirlpool My washer electronic panel switch outer button broke . Is this a common problem and what is the best fix?
1 Answer Rick, If it is the keypads that have broken on the control panel then the Control panel WPW10099593 would need to be replaced. If the stem of the control knob broken off for the settings then this would be a bad user interface and would need to be replaced. Read More...
Rick October 16, 2013 for Model Number wfw8300swo Hello, My washer locked up with 1 minute to go in the wash cycle. Green add a item light is flashing and the red door lock light is on and the door is locked. Unplugging unit does nothing and no response from any button when pushed. Board remains in add item light flashing/red door locked light lit. Please advise. Thank you for your help. Rick
1 Answer Hello Rick. Make sure the unit drained out. If so, you will need to order and replace the control board WPW10525351 on the unit. Read More...
Joanna September 25, 2013 for Model Number Wfw8300sw00 Our washer machine is coming up with the F20 code repeatedly. We've checked and it doesn't appear to be plugged. But it will do a full cycle if I run the hot water. Would it be the control panel?
1 Answer Joanna, If you have already checked the water valve screens then you will want to test for power at the water valve. If there is power then you will want to replace the water valve if not power then replace the control board. Read More...
Lizzard July 07, 2013 for Model Number wfw8300sw01 Do you just sell the sticker part for the control panel that labels the settings?
1 Answer Lizzard, unfortunately, the manufacturer does not offer an overlay with writing separate from the panel WPW10099593. Sorry about that! Read More...
Jairo C. January 10, 2013 for Model Number WFW8300SW04 I need a central control unit for this washer due to a F01 error code but im not sure witch part number it is?