Mike D. August 08, 2013 for Model Number ed5fhaxvto1 According to your diagram for the my icemaker part #24 has broken off. It became disengaged when there was an ice buildup which forced one side loose. I was able to push it back in and the icemaker would work until the next jam. The last time I pushed it back in it came off completely. Can I simply replace this part or do I need a complete new icemaker?
1 Answer Mike, the ice stripper is part number W10297244. If the part that is broken is part of the icemaker itself you'll need to order a new icemaker, part number 2198597. Thanks! Read More...
A August 06, 2013 for Model Number Kenmore 53606201 Hello! Will this icemaker fit into this model that is over 10 years old? Sears tells me that they do not sell this complete icemaker assembly Thank you!
H.Net Pschenk August 04, 2013 for Model Number kitchenaide supra icemaker My ice maker is making ice but water is running out of the very end closest to door and causes the ice to form an icicle from ice maker to tray, then the ice all freezes together and I have to keep removing blocks of ice. What do I need to do?
1 Answer H.net pschenk, This issue would sound like the icemaker mold has some deterioration to it and you would want to either replace the ice mold or the icemaker assembly. Read More...
Felix August 01, 2013 for Model Number 10655616400 Our ice maker makes the ice and you can see it when you open the door but it wont slide off the ice maker and into the ice holder bin. I have to slide it down by hand each time...do I need to replace entire ice maker or is there something I can adjust? The ice is just dangling on the edge of the ice maker but will not fall on its own into the ice holder bin...once I push it by hand it goes thru its cycle again and does the exact same thing. If I purchase the complete ice maker or whatever part you recommend if it does not fix the issue can I return the part for a full refund? thank you.
1 Answer Hello Felix. If the cubes are a good size, you will need to order and replace the icemaker on the unit. If it does not fix the issue, you can return the icemaker. Read More...
Steve July 22, 2013 for Model Number htm18gcsarsa Where the water comes in to the refrigerator up to the ice maker, there is a relay or somthing where the water goes into before it goes up to the ice maker. The side says 115vac 50/60Hz looking to try to buy one, but not sure what to ask for. Help.
1 Answer Hello Steve, The part you need is (AP3189335) We ship to Hawaii and will match the price if possible. Read More...
Ed July 14, 2013 for Model Number KSBP25INSS00 Just bought the house. Ice maker not in freezer. I need the hole assembly. Can I get the metal arm also?
1 Answer Hello Ed. 2198597 is the correct icemaker. There is no bar as this unit uses the emmiter board for on and off. Read More...
Josh July 09, 2013 for Model Number KSRA25CNSS00 My ice maker quit working. The ice is the only thing that quit. The water will work from the door. I replaced the inlet valve and the ice maker worked for 2 days then quit again. The red light blinks twice when I open the door and there is no water draining into the tray. Should I buy a new Icemaker Assembly?
1 Answer Hello Josh. Here is a link to our Repair Forum, this is a free service to our customers. Use this link to access the repair for your question. http://forum.appliancepartspros.com/refrigerator-freezer-repair/29618-ice-maker-not-working-kitchenaid.html Read More...
Jim July 01, 2013 for Model Number Whirlpool Model No. GS6NHAXVS02, Icemaker Assembly W10190960 (Part # 2198597) My icemaker stop working. I found it was jammed with ice in the icemaking tray. I removed the unit from the freezed, thawed the ice and reinstalled. The icemaker made one load of ice and then again has stopped making ice. The tray is full of frozen ice cubes but it seems that it will not heat the ice to allow it to be removed from the tray.
1 Answer Jim, You will want to pull the icemaker out and take the cover off and check the pins in the center of the large gear. If the pins look pushed together or if one is missing then replace the icemaker module. You will also want to take the motor module off and check for burnt contacts. Also check the continuity of the thermostat, the 2 inner pins and the heater, the 2 outer pins. If either does not have continuity then the part is bad and would need to be replaced. Read More...
Dave June 26, 2013 for Model Number ksri25nbl00 My icemaker does not make ice. The orange power light just keeps flashing. Do I need to replace?
1 Answer Dave, I've found model KSRI25FNBL00. According to the information provided you will need to replace the emitter and receiver boards. These parts come in a kit as part number W11629974. Thanks! Read More...
Donald S June 04, 2013 for Model Number GD5RVAXVB00 I cannot remove the icemaker from my Whirlpool side by side refrigerator. I have removed the cover, push the clips, removed the screw in the back right. The black fill tube is in the way and will not let it slide forward to come out. Thanks
1 Answer Donald, You have to kind of pull hard on the icemaker to get it past the fill tube. The fill cup will twist toward the back a little but it will come out. Read More...