Donna November 30, 2011 for Model Number MAH5500BWW When I wash a load of clothes the led console lights all blink it beeps a lot and I can't use any of the buttons. Will replacing the control panel fix this
1 Answer Donna, Yes, the control panel/keypad assembly 22003238 could be the issue, and is the most likely issue at this time. You have the correct part number and is a good place to start. Thanks and Good Luck Read More...
Brian B September 10, 2011 for Model Number MAH5500BWW Hi: The start button had to be presses a few times before washer would start. Now the start button doesnt start the washer at all. Does it seem like the touch panel?
1 Answer Brian, Yes, The touchpad assembly/ control panel is the more likely issue 22003238. If you wish, once you remove the control panel assembly, you shoukld find the tech sheet inside, and you can test the keypad ribbon resistances with a multimeter. To remove the console, remove the three screws across the back top portion of the console, push back on the console, and roll the top of the console towards the front of the machine. Good Luck and Thanks Read More...
Rolando August 22, 2011 for Model Number MAH5500BWW Some of the buttons on the touch tone pad are not working. On the fabrics only the cotton/sturdy work (stuck on that one), and on the wash/rinse is stuck on hot/cold. What do you think is the problem?
1 Answer Hello Rolando. Based on the information you provided, it sounds like the console 22003238 is bad and will need to be replaced. Hope this helps. Read More...
Meg April 18, 2011 for Model Number MAH5500BWW Is the membrane the same as the control board? If not then which control board do I get for Ser# 85901182AG mod# MAH5500BWW?
1 Answer Hello Meg! The membrane 22003238 is the electronic control panel and touch pad. You will need part number WP22004299 for the electronic control board. Thanks. Read More...