Gib March 25, 2022 for Model Number 106.5745*703. The ice maker no longer makes ice. I have ordered a new unit to replace the existing one which is 14 years old. There is a blinking red light on the right side of the freezer. It blinks twice, then pauses and then blinks again. Do I need to replace this unit as well? what is the part number I should order?
1 Answer Gib, If you push the flapper on the left wall and the light continues to blink then the emitter and receiver board will need to be replaced. Read More...
Scott September 01, 2020 for Model Number GD5PHAXMS10 Our ice maker is not working. The emitter cover is broken which I am ordering today. The ice maker has worked for most of the time- 5 or more years- without the cover but now when I turn on the water to the ice maker it over flows and creates the frozen waterfall. You assistance is appreciated. Thanks
1 Answer Scott, If you have to turn the water off on the unit to get the water to stop flowing then this will be a faulty water valve and will need to replace the valve. Read More...
James July 16, 2016 for Model Number GD5RVAXVY05 Hello, My ice maker quit working a month ago. I replaced the water inlet valve and the complete icemaker unit. It still will not make ice. No water flows into the tray. I defrosted the freezer, so the ice maker fill line is not frozen. The icemaker off/on switch is on "on" , and there is a blinking red light on the right side of the cabinet. Any Ideas as to what to try next? Thanks, James
1 Answer Hello James. You will need to order and replace the emmiter boards on the unit. They are bad. Read More...
Jeff June 25, 2015 for Model Number GS5SHAXNB00 According to an online tech that recommends your site my ice maker is not working and doing a check of the infared sensor is not working properly. It blinks twice then off for 1 second even if you hold in the flapper with door open. Do I have replace just the one side, not the receiver side? Light should be on constant right?
1 Answer Hello Jeff. Based on your testing, it sounds like the boards are bad and you will need to replace the kit W11629974 on the unit. Read More...
Robert Penate November 01, 2014 for Model Number KSRB25FKSS04 I spoke to one the Techs. in the online chat and explained my problem I was having with my ice maker. The recommendation was to replace the ice striper and emitter cover. I order both from you (order#4856084). Received the parts but the emitter cover did not come with the door which was the damage part of this piece. I don't need a new cover by itself I need the door to the cover. I was under the impression that this was a complete part. Can you please assist me in getting the right part. Thanks, Robert
1 Answer Robert, The part that goes on the cover is the emitter flipper part number WP2198633. Read More...
Connie W March 23, 2014 for Model Number 106.56549400 The LED for the Emitter is no longer working (not purple and lit) and the red light on the otherside is flashing. I see that the part 2198587 is for the PVC portion. It is the LED board that no longer is working and I cannot find this part. Please help me with how I go about getting this part as I have all ready replaced the entire Ice Maker at this point and apparently it has been the Ice level sensor that has been out the entire time. By the way Sears did come out and did not notice this. Frustrating!
1 Answer Hello Connie. Based on the model number provided, W11629974 is the correct boards for the unit. Read More...
David November 19, 2013 for Model Number ED5LVAXWQ02 I replaced the ice maker unit and it still will not make ice. The red led on the side ,of the freeze blinks twice every 2 seconds.
1 Answer Hello David. Here is a link to our Repair Forum, this is a free service to our customers. Use this link to access the repair for your question. http://forum.appliancepartspros.com/refrigerator-freezer-repair/29618-ice-maker-not-working-kitchenaid.html Read More...
Bruce October 21, 2012 for Model Number kitchenaid refrigerator model KSRA25CNSS00 I need to replace the door that flips open when the freezer door is opened. I want to replace the entire unit. The part that is written on it is 2198587. Does that cover the small door that is attached to the main unit that when I open the freezer fdoor it opens a bit. I think this is for the ICE Maker, but I am not sure. Also what happens without the little door that is missing/broken? In addition, if I order the entire unit with the door, how fast can you ship?
1 Answer Bruce, the emitter cover is part number WP2198587 and it covers the flipper WP2198633. The flipper will need to be replaced if broken or missing. This is to cover the LEDs that connect the emmiter and receiver to call for water/ice. Thanks! Read More...
Ross July 28, 2011 for Model Number 106.51559104 I ordered a part for this refrigerator from you. The part number was WPL 2198587. This part is in the freezer compartment of my Kenmore refrigerator. I do not need this part, I need the white plastic flap that attaches to this part. The part prevents the ice machine from producing ice when the door is open. Can you help me find this part? My order number was 2005114. My name is J R C.
1 Answer Hello Ross. Based on the information you provided, it sounds like you will need to order WP2198633. Hope this helps. Read More...