Micki April 26, 2011 for Model Number 96560100 where is the heating element located on my kenmore dryer please
1 Answer Hello Micki, the heating element on your unit is located behind the drum. It will be mounted inside the heater box 695547. Thanks! Read More...
1 Answer Hi Jim. You should have no issues with using the new element if you have 220v. Thanks! Read More...
Randy April 17, 2011 Cannot find model# on machine, Heavy load capacity. The heater is located behind drum and about 18" long with 4 wire connecting.
1 Answer Hello Randy! We will need the appliance model number to verify if WP4391960 will work. Here is our model number location tool to help locate your appliance model number, thanks. http://www.appliancepartspros.com/modelnumber_locator.aspx Read More...
Cherrii M. April 07, 2011 for Model Number LE5530XMNO My dryer quit heating up while drying a load of clothes. What part would I need to replace?
1 Answer Hello Cherrii. Check and make sure you have 240 volts coming to the dryer. Also check the heater and thermal fuses and see if they are good. You can test these with a multi-meter MA-DM1. They should read closed for continuity. Hope this helps. Read More...
Greg March 20, 2011 for Model Number LE8600XWW0 Saw an answer suggesting to check that 240 V is going to the dryer and the heater and thermal fuses read closed with a multimeter. Are these test someting a novice can do? Symptom: no heat to dryer - worked a few days ago.
1 Answer Hello Greg. Yes, these test are not to hard to do. Just be careful when testing the voltage. You can test these with a multi-meter MA-DM1. The fuses and the heater will read closed for continuity. Hope this helps. Read More...
Brian C. March 17, 2011 for Model Number REX5635EQ2 Hi, I have a hunch that the element in this much older model Roper dryer needs to be replaced. The dryer itself still runs and tumbles but there is no heat inside of the drying drum (where I put the clothes). Like I said it is an older model, it was a hand me down from the in-laws. I was curious if this particular element is the one I need for my make and model. I have a 3 wire 120/240 volts dryer it runs 60 HZ and is 28 amps. The model number is REX5635EQ2. The serial number is MH3504655, and the type no is 122-00. This is all the information I have available. Please let me know when you can. Thanks for your time.
1 Answer Hello Brian! The dryer element for your Roper model REX5635EQ2 is part number 279838. Thanks! Read More...
James March 13, 2011 for Model Number kenmore 96060100 What is the part number for the element for a Kenmore 96060100?
1 Answer Hello James! The matching element for your Kenmore model 110.96060100 is WP4391960. Thanks! Read More...
Guest March 13, 2011 for Model Number ler7646aw0 My dryer stopped drying clothes. I noticed no heat coming out of exhaust.
1 Answer Hello. Check and make sure you have 240 volts coming to the dryer. Also check the heater and thermal fuses and see if they are good. You can test these with a multi-meter MA-DM1. They should read closed for continuity. Hope this helps. Read More...
1 Answer The heater on this dryer is located in the bottom, under the drum, in a heater housing assembly. Here is the part number for the samsung heater. DC47-00019A Hope this helps. Read More...