Glenn February 02, 2014 for Model Number GI6FARXXBO Where is the water filter located on my unit?? We Have looked in all the information books and can't find how to change the filter. Thank you Glenn
1 Answer Hello Glenn! The water filter EDR4RXD1 is located in the upper right hand corner of the fresh food section. It is covered with a white plastic lid part number WP67006331. Hope this helps you, thanks. Read More...
1 Answer Hello Hina. Press the button and drop down the cover. Then twist to release the old filter and twist the new one into the filter head. Run about 2 gallons of water through dispenser to remove any air from the lines. Read More...
1 Answer Hello William, The manufacturer recommends to replace the water filter every 6 months. I recommend to replace the filter when the water dispensed is notable slower, indicating the filter is becoming clogged with sedimentation and mineral deposits from the water supply. Read More...
Terry January 07, 2014 for Model Number KBLA20ELSS01 I need a replacement water filter and the one shown does not look like the one I am taking out. What is the correct replacement past fo this refrigerator?
Julie December 03, 2013 for Model Number Kitchenaid French door model KFCS22EVMS00 I have a Kitchenaid French Door type of fridge with the filter on the upper right ceiling inside the fridge in a little drop down door. What is the exact filter I need? Thanks!
1 Answer Hello Julie. Based on the model number, EDR4RXD1 is the correct filter for the unit. Read More...
Saundra November 21, 2013 for Model Number whirlpool GI5SVAXVQ01 Where is the filter for the water/ice maker?
1 Answer The water filter is located in the upper right-hand corner of the refrigerator compartment. Your User Manual has these instructions for removal and replacement. 1. Turn filter counterclockwise to remove. 2. Remove sealing label from replacement filter and insert the filter end into the filter head. 3. Turn the filter clockwise until it stops and snap the filter cover closed. 4. Flush the water system. Use a sturdy container to depress and hold the water dispenser pad for 5 seconds, then release it for 5 seconds. Repeat until water begins to flow. Once water begins to flow, continue depressing and releasing the dispenser pad (5 seconds on, 5 seconds off) until a total of 4 gal. (15 L) has been dispensed. This will flush air from the filter and water dispensing system, and prepare the water filter for use. Additional flushing may be required in some households. As air is cleared from the system, water may spurt out of the dispenser. NOTE: The dispenser feature may be used without a water filter installed. Your water will not be filtered. If this option is chosen, replace the filter with the blue bypass cap W11395888. Hope this helps! Read More...
Beth October 19, 2013 for Model Number JENN -AIR JFC2087HRS Our water dispenser (located on the inside right side of frig) has a slow leak that seeps into the freezer....will replacing the filter correct this problem....or, what part is necessary to stop this leak...
1 Answer Hello Beth. You will need to order and replace the water valve WP67005154 on the unit. Read More...
Mike October 16, 2013 for Model Number ed2chq The filter on this unit is model #gx1lq do you carry that part?
1 Answer Mike, We are not showing a water filter that would have come with your unit. This appears that it may be a in line water filter in which you could use part number GXRTDR. Read More...
Jack October 14, 2013 Model msd2352kew. I changed water filter, the red light stays on. Where is the reset but on this model? Also ran a couple of gallons of water out, the red light is still on. Thanks.
1 Answer Hello Jack! Here is the instructions found in the owners manual: "Press and hold both the Lock and Water buttons simultaneously for four seconds. The green filter status indicator light will flash three times when the function has successfully reset." Hope this helps you. Thanks! Read More...