Tony L. June 04, 2011 for Model Number MAYTAG LDG8200AW My ignitor radiates but shuts off before it ignites the gas. Can you tell me what part I should replace?
1 Answer Hello Tony. Your ignitor should be glowing a bright red, almost white light. If it's a dull glow, then you will have to replace the ignitor. Also for this unit the most common failure will be the coils 279834. Hope this helps! Read More...
Dale May 09, 2011 for Model Number LDG7500AAL The igniter does not come on it checks good for continuity, also have continuity on the thermal fuse and the flame sensor. When turned on and tumbling I have 118 volts ac on both sides of the igniter, thermal fuse, flame sensor and on the coils on the red and white wires the black wire has 108 volts and the blue wire has nothing. The 2 prong coil has 1193 ohms and the 3 prong has 1312 between 1&2 and 520 ohms between 1&3. Whats next ??
1 Answer Hello Dale. If there is power at the igniter, but it does not come on, you will need to replace the igniter 4391996. Hope this helps. Read More...
Cjojns May 05, 2011 for Model Number mda5500aww My ignighter gets hot and then goes off. No flame and I smell gas.
1 Answer Hello Cjojns. It sounds like the igniter 4391996 is weak and will need to be replaced. If the igniter is weak, it will not lite the gas. Hope this helps. Read More...
Aaron April 07, 2011 for Model Number Missing My maytag Atlantis is missing model number. It's not heating found that the Ignitor is bad. The wife and I bought it in 2005. Need to know which Ignitor to order?
1 Answer Hello Aaron. Here is the most common dryer igniter 279311. You will need to look at yours and see if it looks the same. Hope this helps. Read More...
Lazaro February 21, 2011 Como saber si esto esta trabajando o como saber si funciona. Si esto es inportante para que pren da los pilotos How can I tell if my ignitor is working properly. Also will a bad ignitor affect the function of the gas valve?
1 Answer Hola Lazaro, Mire si el encendedor esta brillando rojo. Si el encendedor no brilla rojo, no encedera el gas.Hello Lazaro, first you will want to make sure that your ignitor is glowing a bright red. If the ignitor is not glowing bright red but still comes on. The ignitor might not be getting hot enough to open the gas valve. Hope this helps! Read More...
Guest February 20, 2011 My gas dryer has no heat, what could be the cause and will I be able to make the repair myself. I am quite handy with large knowledge of several tools.
1 Answer Hello. You will need to check and make sure the igniter is getting hot enough. Also test the thermal fuses and flame sensor and make sure they read closed for continuity. You will also need to check the coils 279834 and see if they test good. You can test the coils using a multi-meter MA-DM1. The two prong coil will read 1,000-1,300 ohms, and the three prong coil will read 1,300-1,400 ohms across prongs 1&2, and 500-600 ohms across prongs 1&3. Hope this helps. Read More...