Kathie S April 11, 2017 for Model Number GX5SHDXVB01 When we were moving my daughter removed the bottom glass shelf so it wouldn't get broken and put it in her car. Other people did not know where it was and placed stuff on top of it and it broke. This is the big piece above the bottom 3 drawers. The piece above the crisper drawers. I also need the slide piece for the beverage holder for the door. The bottom piece just wore out and broke. We taped it with duck tape but it would not hold the cans in. Thank you
1 Answer Kathie, The part number for the crisper glass will be WP67006704 and the sleeve for the can dispenser will be WP13005401SP. Read More...
Debbie July 10, 2016 for Model Number MFF2557HEW The piece on the right side of the right crisper drawer that stops the drawer from falling out broke off. It looks like the crisper drawer frame needs to be replaced. If so, can we keep the same piece of glass? Thank you
Theo March 20, 2016 for Model Number MFI2568AES The stud that holds the crisper support broke off. The support piece itself, but the plastic stud that the support clicks to is broken off flush with the inside of the panel.
1 Answer Hello Theo. You will need to order the crisper frame support WP12603701 for the unit. Read More...
Michael H December 25, 2015 for Model Number KFIS25XVMS00 Recently cleaned the refrigerator because of spills. I now notice the crisper bins seem to be rubbing the rails and wearing out the plastic of the frame. Is this something that happens after so many years and I just have to replace the pieces or is something else wrong. Is there some type of lubricate we washed off, glides missing or?
1 Answer Michael, You could put a little vaseline on the rails to help glide easier. What you are seeing is the way that the drawers on the unit are made and the vaseline will help with this. Read More...
John H January 04, 2015 for Model Number KFIS25XVMS2 I'm looking for the center rail support for the crisper drawers that hang from the crisper frame. I don't see that part on the parts explosion. Is that part available separately, or does it come with the crisper frame? My refrigerator is a KitchenAid model KFIS25XVMS2, serial KY44772280. I did see another person ask a similar question about his same part for a different model refrigerator. I checked that part, W10326469 (AP4695676), and it did not cross reference as a part for my model.
Maytag123123 December 01, 2014 for Model Number MBR2556KES I need to replace the frame but the rest of the pieces (humidity controls, etc...) are fine. Is there a diagram showing how to disassemble the parts? I tried pushing and pulling on all sorts of items without any success.
1 Answer Hello Maytag123123, The complete crisper should simply slide out. Unfortunately, there are no instructions in print. You will just have to watch closely what you take apart and possibly take pictures of the assembly before dis-assembly to refer to during the reassembly process. The glass in these are common to stick in place from spills so be careful to avoid cuts and personal injury. In some cases it helps to soak the assembly in warm soapy water in the bathtub. This will free up any parts that may be stuck in the previously discussed manner. Read More...
Dennis December 17, 2013 for Model Number KFIS25XVWH1 I have a Kitchenaid KFIS25XVWH1 Refrigerator and the 2 drawers that hang from the bottom big shelf have a center support that one end has broken off. I can not find that center support in any of the diagrams on line. My only conclusion is that it might be part of the bottom shelf frame. Which might make sense since I do not see a method to put a full support back in unless you can take the whole frame apart. The issue I have is none of the pictures for the large shelf frame show a middle support in them so I hate to spend almost $100 to find it is not built into frame. Any help ?
1 Answer Dennis, The part number for the center rail of the crisper frame is part number WPW10326469. To replace you will take the crisper drawers out and lift out the glass. The support will go in in the center and just set in place. Replace the glass and the drawers. Read More...
Don October 01, 2013 for Model Number Amana BRF20V1S I broke the plastic bin on the right side of the crisper section. What part do I need?
1 Answer Don, the party tray is part number 12046001. Unfortunately, this item has been discontinued and is no longer available. Sorry about that! Read More...
Julie C August 15, 2013 for Model Number 59677593801 Hello I am looking for the glass part that sits on top of the cripser. I found the crisper frame: PS1843408 but the glass is not included in it and there is no link to find it. Can you please refer me to the glass part? thanks, Julie
Scooter July 27, 2013 for Model Number MFI2569VEB Need the crisper frame and cannot find the part number for the brace. Is there anything else that supports the two drawers or the frame in back? My frame snapped in half in the back. Thank you.
1 Answer Hello Scooter, The center rail for the crisper is part number (AP4695676). There is nothing else that supports the crisper other than the side rails. Read More...