Gerald D January 25, 2012 for Model Number Amana French Door with bottom freezer I hooked up the water supply with a needle valve and it was not sufficient enough to keep the water faucet portion going. Some ice was made. I replaced the needle valve with the proper saddle valve and have plenty of pressure but the ice maker will not make ice. It did make some ice when there was insufficient flow for the water tap. Any suggestions to get it going. I have just purchased the refrigerator.
1 Answer Gerald, If you operated the fridge foe an extended period of time, with the poor water pressue, you may have damaged the solenoid on the water valve. Also check and flush the water supply line, if you didn't already, and check to make sure you didn't loosen the wires on the solenoids by accident. Good Luck and Thanks Read More...
Zach January 16, 2012 for Model Number 596.61852100 I am looking for a complete ice maker kit (fridge never had one) for the Kenmore model number above. Thanks!
1 Answer Hello Zach! For an install kit you will need to use part number 4396418, this kit does not include the ice pan WP67001255. Thanks! Read More...
Eric January 15, 2012 for Model Number jcd2295hes Will this Icemaker kit work for this model (jcd2295hes) jennair fridge?
1 Answer Hello Eric! For a replacement icemaker you will need to use part number D7824706Q. Thanks! Read More...
1 Answer Hello Alex. No, you will need to order 4396418 according to the manufacture. Hope this helps. Read More...
Joe November 11, 2011 for Model Number rs25agxnqoo water kepps coming outand freezing in the pan/on water to the door /noe the ice maker is grinding and only puts out a little/can i ues a kit to replace water valve and the unit. big price differance
1 Answer Joe, Sorry but no, that kit will not work in your refrigerator properly, You will need part number 4317943 and W10408179 to do the repair properly. Good Luck and Thanks Read More...
Wes October 26, 2011 for Model Number 106.8566850 Removed old ice maker from this Kenmore refrigerator and now wish to replace it. What replacement ice maker should I use? Thanks
1 Answer Hello Wes. Based on the model number you provided, 4317943 is the correct icemaker. Hope this helps. Read More...
Lauren August 24, 2011 for Model Number Whirlpool EET-222-MT You suggested a complete replacement part but in reading the description it says DOESN'T work for 22 cu ft fridge which, is what I have. Any other suggestions?
1 Answer Hello Lauren! Yes, the replacement icemaker part number 4389195 is the manufacture suggested replacement to your Whirlpool Refrigerator. This part is guaranteed to work per the manufacture. I apologize for the confusion. Thanks. Read More...
Lauren August 24, 2011 for Model Number Whirlpool refrigerator I have a model EET-222-MT refrigerator (I think purchased in 1988) that originally had an icemaker but it's not functioning? Will this kit work? What are your return policies? Thanks
1 Answer Hello Lauren, you are unable to bypass the icemaker as it contains the defrost mechanism for your fridge to automatically defrost. You can replace the complete icemaker with part number 4389195 or repair the current icemaker with part number 4318061 and 978140. Thanks! Read More...
Dan August 23, 2011 for Model Number 106.63982300 Is this the correct icemaker kit to install in Kenmore 106.63982300? This is not a replacement but a new install - this fridge has never had an ice maker.
1 Answer Hello Dan! For a complete icemaker add on kit you will need part number 1129316. Thanks. Read More...
Arvee August 13, 2011 for Model Number Whirlpool Performa PTB 21AAGR The label inside my refrigerator says I have an Ice Maker Option. Newton Kit UK11500AXX. How and where is it installed in the freezer?
1 Answer Hi Arvee. You will need to install the water valve behind the fridge on the rt. lower corner. The tubing should be from the water valve output to the ice maker. The supply will hook up to the inlet to the valve. The fill tube will go into the round peel off sticker on the back upper rt. of the cabinet. You will install ant mount the ice maker . Make sure as you tighten the ice maker to the inside of the cabinet that you level it, then install the bottom front screw. Make sure that the bail arm is dowm. It should start to cycle when the ice maker reaches freezer temperatures. Thank you. Read More...