Customer Questions and Answers for Dispenser Overlay by Whirlpool

Bob, unfortunately, the manufacturer no longer makes the white finish facade part number 67004121. The manufacturer only shows the facade WP67004151 as being available and is a black finish part.

Hello Jay. You just peel the old one off and then stick the other one on. It has glue on the back of it.

Hello Jojo. Yes, the façade WP67004151 comes with glue already on it. You remove the paper on the back and stick it on.

Hello Jeanie. We will need your model number to help you with this. Please call 1-877-477-7278 or post your model number with a new question on the parts page. http://www.appliancepartspros.com/modelnumber_locator.aspx

Hello Bud. It unsnaps from the front of the door. Start with the bottom corners.

Hello Bud. You will need to check the switch inside the dispenser and see if it is good. Also, check for a wiring issue with the unit.

Sue, You would want to change out the dispenser facade WP67004221 and the insert WP67004151. Behind the insert there are buttons that you are actually pushing on and these buttons can break. When they break it allows the insert to crack.

Pat, facade part number 67004344 has been discontinued and the manufacturer does not offer any replacements or cross references for this part. Unfortunately, we will not be able to verify that WP67004151 will replace this item. Sorry about that!

Hello Kate. The facade WP67004151 is what you will need to repair the unit. You will need to peel off the old one and press the new on in place. If the buttons are bad, you will need to replace the assembly WP67004284. Hope this helps.

Hello Kate. Yes, the facade insert WP67004151 has Maytag under the selections on the front of it. Hope this helps.