Jack November 30, 2016 for Model Number WMH31017AS-3 What is the correct part # for replacement bulb for stove light?
Jeremy November 24, 2016 for Model Number WMH2175XVB2 I need to replace the bulb under the microwave for the stovetop. Can you please tell me which part number I need.
Tracy November 09, 2016 for Model Number WMH31017AS-3 Will this light bulb fit in the socket for the light underneath the microwave that lights up my range? I cannot find one that fits at any local stores. They are all too long.
1 Answer LBJ, If you are trying to replace the light bulb inside the unit you will have to pull the unit down from installation and remove the outer casing of the unit in order to access the light to change the bulb. Read More...
Scott November 03, 2016 for Model Number WMH1163XVB-2 The original lightbulb burned out, after 6 years of use, impressive..but the replacement I used wasn't as bright as the original - even though it was a 40 watt - now - I had to break the replacement bulb to remove it - the bulb is replaced at right angles to the screw hole - in other words, it's not on your right or left hand side it's towards you as you screw the new one in ..you're tightening the bulb in a counter-clock-wise manner ... so, now that I've removed what I thought was the same bulb as the original - I'm not sure how to proceed ... ANY help is appreciated!!!
1 Answer Hello Scott. Test and make sure you have the proper voltage coming to the bulb. If so, then the socket and board are good. If not, then the board may need to be replaced or the socket may be damaged. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html Read More...
Gene September 08, 2016 for Model Number WMH53520CB-2 Is an led bulb available for this model microwave ?
1 Answer Hello Gene. Sorry, we do not have any LED bulbs listed for this unit. Thank you. Read More...
Sammie August 20, 2016 for Model Number GMH6185XVB1 When removing the bulb, the bulb came out, but the part that screws into the hole is still in the hole. I guess from over time using the light the glue separated and just the glass came out. How do I remove the metal part that screws in?
1 Answer Hello Sammie, The following cannot be done with power to the unit so go ahead and unplug it from the wall outlet. Put on a pair of protective gloves to protect you from the sharp edges of the old bulb and, using a pair of needlenosed pliers, grasp one side of the metal part of the light stuck in the socket. Turn it counterclockwise. This will wrap the metal from the light around the pliers but will be removed after turning far enough. When completely removed from the socket, carefully use another pair of pliers to turn the sharp metal in the opposite direction to remove it from the needlenosed pliers. Read More...
Jim August 04, 2016 for Model Number Kenmore bulb I have a microwave from Sears and the build I need says Part# 5304488360. It is very expensive I would rather buy from you. Any thoughts?
1 Answer Jim, The bulb can be purchased online at appliancepartspros.com or by calling 877-477-7278. You would just use part number 5304488360 in the search on the website for parts search and price. Read More...
1 Answer Hello Spunky. Here is a link to help you. http://www.appliancepartspros.com/customerservice/shipping.aspx Read More...