Lizette September 23, 2020 for Model Number 10651133213 The lights of freezer and refrigerator are almost out, I count 2 in the refrigerator and 1 in the freezer is this correct? the LED lights of the refrigerator look different, one for sure is WPW10515957 but I can't find the number for the bigger one.
1 Answer Kevin, if the model number of your appliance could be provided in a new inquiry, this will allow for the most accurate information to be presented. Read More...
Jon June 24, 2020 for Model Number whirlpool WRS322FDAW00 All of the cabinet light have quit working. should i replace all of them or is there another problem?
1 Answer Hello Jon, start by replacing the freezer LED light module first , it is part WPW10515057. Read More...
Bernie June 16, 2020 for Model Number KSF22C4CYY00 6 months ago the LED Assembly W10515058 was replaced. The lights are off again. I am wondering if the light module W10515057 needs to be replaced.in the freezer. We have a lot of food in the freezer and could that cause a problem?
1 Answer Bernie, The LED light going out will not have an effect on the unit cooling. The LED WPW10515057 would be the most likely cause of this issue. Read More...
Nancy May 16, 2020 for Model Number WRS335FDDM01 The main light went out (WPW10515058) about a year ago. We replaced that part and all started working again. It just went out again, and we replaced it a second time and then discovered the freezer light flickering - and it went out shortly thereafter. We unplugged the refrigerator and removed the freezer light (WPW10515057) and plugged the refrigerator back in and none of the lights worked. We assumed that was because a part was missing. When the part arrived, we again unplugged the refrigerator and installed the new light in the freezer. We've plugged it back in, but now none of the lights work.
1 Answer Hello Nancy, the LED light module in the ceiling of the ref is the master module, meaning it powers (120vac to 14vdc), its internal LED lights, and also the other module behind the crisper and the module in the freezer. If the freezer module was failing it may have damaged the Master module, it is part WPW10515058. Read More...
Joe May 14, 2020 for Model Number WRS325FDAW04 Good Morning and thank you for this opportunity to ask a question . I have just noticed that my 2.5 year old side by side has a light problem. It seems the lights in the refrigerator section are dim and the light in the freezer is out. 1. Are the refrigerator and freezer lights interconnected somehow? 2. If so, will replacing one or the other correct both issues? 3. Are these part numbers correct: Part# for freezer light and lower fridge light is WPW10515057 and for the upper fridge light it is WPW10515058? 4. How likely is it that that the freezer light switch is bad? Thanks again for your time Joe
1 Answer Joe, We are sending you a tech sheet to check voltages on your lights. They are in series that means you have power going in and out of each light feeding the next light. Look on the right hand side of the schematic and find the voltage test diamond led test.The refrigerator has 120 vac coming in and 12 vdc coming out and all the other lights will be dc current. Read More...
Roger April 30, 2020 for Model Number WRS322FDAW04 The LED lights on the freezer (left) side of my refrigerator have gone completely out, and oddly the refrigerator side lights, which still work, are however not as bright now. I checked the switch above the freezer door, it works. So is it the light assembly with the tapered lens behind the ice trough? And is the part # I need WPW10515057 or W10515057?
1 Answer Roger, it is recommended that the freezer light is tested for 12VDC from pin 1 (red probe) to pin 2 (black probe) at the wire connection. If it is receiving 12VDC, the freezer LED WPW10515057 has failed and would need to be replaced. Read More...
Pete April 07, 2020 for Model Number WRS325FDAM04 All lights out check door switches they appear to be working changed light in freezer 057 but not working any other suggestions
1 Answer Pete, This issue would be caused by a faulty refrigerator light assembly WPW10515058. Read More...
Nader March 23, 2020 for Model Number w10515057 if led U3 is malfunctioned the rest U4 ,U5, U6 will be off? If so can I replace the malfunctioned on? and what is tech. specs. for it?Thanks
1 Answer Nader, We will need your model number to help you find the right parts for your unit. Please post another question with all your info included thank you. Read More...
Jeffrey February 05, 2020 for Model Number Kenmore 10651123211 Both the freezer and refrigerator side lights are very dim almost all the way out, but not all the way. What is the issue?
1 Answer Jeffrey, the top refrigerator light WPW10515058 will need to be tested for 120VAC at terminal L. If there is a full 120VAC, then the two-wire connector on the other side will need to be tested for 12-14VDC. If there is not a full 120VAC, the incoming power to the refrigerator will need to be tested for 120VAC. If there is not 12-14VDC, but there is 120VAC, then the light has failed. If there is 12-14VDC, then the lower refrigerator light WPW10515057 and the freezer light WPW10515057 will need to be tested for 12-14VDC and inspected for any failed LED bulbs. If there is a failed LED bulb, that light would need to be changed out. If there is a fluctuating DC voltage at the lower refrigerator light, the freezer light would need to be replaced. If there is not a fluctuating DC voltage, and voltage tests good, then the likely issue would be the lower refrigerator light. Read More...