Greg December 15, 2016 for Model Number LGQ9508PW1 Converting back to Natural Gas from LP. What parts are needed to make the transition? Thank you
1 Answer Hello Greg, For converting back to natural gas you will need one of each of the following: Orifice WP234826, Limiter WP694424, Regulator Screw Spacer WP694423, and Regulator Spring WP694422. Read More...
Chris B November 30, 2016 for Model Number Bosch NGM5055UC I would like to convert the cooktop back to natural gas, I understand that I need to replace the orifices, but don't know the part numbers. Also do you carry them and what is the price?
1 Answer Chris, To change this unit back to natural gas you will need the orifice holders which would be for the left front 00771236, left rear 00757899, right rear 00757889 and right front 00757863. You will also need to flip the regulator cap from LP to Natural. Read More...
Gt October 21, 2016 for Model Number kenmore 790 74503 990 Range was converted to LP gas and I need to switch back to natural gas. The orifices for natural gas would be marked 107N,150N,and 180N. I have not been able to locate them. do you have any ideas? Thanks
1 Answer GT, In order to get the orifices to convert the unit back to Natural you will need to get the burner tubing. The part numbers needed would be left rear 318167713, Left front 318167716, Center 318167712, right rear 318167706, and right front 318167715. For the regulator you will need to flip the cap from LP to NAT. Read More...
Doublejack October 12, 2016 for Model Number wgd9550wl1 This unit needs to be converted back to natural gas from LP. What parts are needed?
1 Answer Hello Doublejack, You will need to order WPW10118347 to convert the model provided back to natural gas. Read More...
Roger March 26, 2016 for Model Number Kenmore 11094834201 Hi, I have a kenmore dryer that was converted to LP and now i need to convert it back to natural gas and the parts were thrown away can you tell me what parts are needed?
1 Answer Roger, To convert this unit back to natural gas you will need natural gas limiter WP694424, natural gas spring WP694422, and natural gas orifice WP234826. Read More...
Ryan November 21, 2015 for Model Number # LGR5636EQ2 Hi, I'm converting this dryer back to natural gas and need to know part #"s for orfice and limiter and anything else that would be needed . thanks ,Ryan..
1 Answer Ryan, You'll need the following parts to properly/safely convert the gas valve back to Nat Gas. WP234826 burner orifice, WP694424 limiter/regulator cap, WP694423 regulator ring, WP694422 diaphragm spring. Make sure you're careful and don't damage the igniter and don't cross thread any of the fittings(especially the brass limiter cap) and check for gas leaks once the parts are changed and installed in the machine, Read More...
Scott August 14, 2015 for Model Number MGDC200XW2 I am trying to switch my dryer from LP to NG. I see the orifice on this dryer but the plug seems to be different than all the videos do I just have to turn it so the NG faces the dot instead of the LPG?
1 Answer Hello Scott. Try removing the cap and see if the other side says NG if so, you can simply flip the regulator. If not, the gas valve assembly will need to be replaced if the natural cap is not there. Read More...
Badger Bob May 23, 2015 for Model Number Kenmore Gas Dryer, Mod. # 97273100 I'm converting our Dryer, from LP to Natural Gas. I have a new orifice (part # 234826). Is that all I will need? Thanx, Badger Bob
1 Answer Badger Bob To Convert Back To Natural You Will Need These Parts WP694424 limiter, WP694422 spring and WP234826 orifice. Read More...
Larry February 27, 2015 for Model Number 97580810 I am trying to convert my dryer from LP to natural gas and I am not sure which part to order. It is a Kenmore Heavy Duty 80 Series dryer. Thanks much!
1 Answer Larry, to convert the unit back to NG you'll need the orifice WP234826, limiter WP694424, regulator screw WP694423, and spring WP694422. Thanks. Read More...
Todd February 16, 2015 for Model Number GW397LXUQ07 I just purchased a Whirlpool GW397LXUQ07 Gas-Fired Range which is currently setup for LP. What orifices and other changes are necessary to get it back to Natural Gas-ready? How can I differentiate the orifices from one another...side markings, bore diameters...? I imagine acquiring the Installation Instuctions would be helpful, but this doesn't seem to be available. Any information would be greatly appreciated! Thank you.
1 Answer Todd, To convert this unit to Natural you will need the following orifice for your range top would be the following: The Left front and Right rear orifice will be W10156136, the RF W10156836 and the left rear is part number W10156137. The oven orifice you loosen 1 1/2 to 2 turns and close off air shutters to about a 1/4 way open. The regulator will need the cap flipped from LP to Natural. Read More...