Skip to Content
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Trusted Since 1999 Trusted Since 1999
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google

Customer Questions and Answers for Oven Outer Door Glass Panel by Whirlpool

Best Seller
Manufacturer Part
4.89 (64)
By: Whirlpool
Part Number: OEM15550341
Manufacturer Part Number: W10401225

Replace your cracked, shattered, or broken oven outer door glass panel. Installs as the front panel of your oven door for viewing while cooking.

More
$261.76

IN STOCK
Ships Today Guaranteed
Add to Cart

Questions & Answers

For Whirlpool Oven Outer Door Glass Panel (Part Number: OEM15550341)

1 Answer

Dale, First, you may want to add a washer under each screw first, that will help distribute the force and pressure more evenly. Then tighten the screw until tight to the touch and add and additional 1/4 turn of the screw. Thanks

Read More...

1 Answer

Punky, the outer door glass for the stainless model should be part number WP9759074. This will fit your unit as it is supplied by the manufacturer. Thanks!

Read More...

1 Answer

Luis, check and get the model number off the oven portion of the unit. The numbers you supplied aren't a proper model number. If this is the unit we think it is, you may need to partially remove the microwave, as well as the outer door and torsion bars. Thanks

Read More...

1 Answer

Hi Johan. Open the door. Lock at the type of hinge you have. Rotate the lock levers to lock position for door removal. If yours does not have the door levers, then use 2- screws, to put in the hinge holes as they are aligned. These will lock the hinge in position of door removal. Protect a table top w/ a shipping blanket. Lay the door on its face and hang the door handle (only) off the side of the top. Then you unscrew the front top, bottom and side trim screws. Replace the front panel and do not bind it at all. Front panel part # W10401225. Thank You.

Read More...

1 Answer

Hello Ted. Yes, based on the model number you provided, W10401225 is the correct door glass. To change the glass in an oven door, you will need to determine how to remove the door on the model number you are working on. If you open the door to the first stopping point, some oven doors will lift off the unit in this position. On other models, you will see clips on the back of the hinge toward the opening where the hinge enters the range. If yours is like this, you will open the door all the way open, then pull the clips down until they stop and lock in place. Then close the door to the stopping point and lift the door off the range. If you door does not lift off, and it does not have the clips, then you will open the door all the way open. You will see a hole in the hinge at the bottom of the door. You will insert a pin or nail into that hole and close the door to the stopping point. Then you can lift the door off the unit. Once the door is removed, you will lay it on a soft surface and disassemble the door. Pay attention and make notes if needed for reassembly of the oven door. Once you have replaced the door glass, you will reinstall the oven door back onto the range in reverse order of the way you removed it. Hope this helps.

Read More...

1 Answer

Hello Jon! Yes, viewing a picture that we have located for the stainless door glass W10401225 this is a stainless panel with clear glass that has a black outline. Thanks!

Read More...

Have questions? Ask our pros!

Contact us in a way that is convenient for you

Call us 1-877-477-7278
Need Help? Chat with a Pro
Or ask a question by filling in the form

Share your thoughts with other customers

Ask a Question
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google