Steve March 14, 2013 I have a 110 series Kenmore washer and it has started to leak. My wife noticed a little leak in the floor after the clothes were through washing. Any ideas??
1 Answer Steve, You will want to try to determine where the water is leaking from. Is it leaking from the pump, a hose, from the tub, or is it around the shaft of the transmission. Read More...
Elise July 13, 2012 for Model Number WTW5300VW2 Whirlpool We are following the video and also tried on-line reccommendation, but still can't remove the tub from the drive block. Please help!
1 Answer Hello Elise. If the outer tub ring is removed, and the nut is removed from the unit, then the basket lifts off the drive block. Sometimes you need to give a jerk upward to break it loose and remove it. Just make sure the retaining nut is removed before jerking on the inner basket assembly. Read More...
Roy May 26, 2012 for Model Number 110 2483220 changing outer plastic tub that has a hole, can't pull out inner-metal tub. online video for part #63849 says you should be able to lift the inner-metal tub out --- any suggestions why we can't lift the inter-metal tube out???
1 Answer Roy, If you followed the instructions from the video, and have the basket drive spanner nut WP21366 removed, you're doing fine. On older units, occasionally the spin basket will "stick" to the drive block WP389140 and won't "lift" off the block. You may need to push down and pull up on the spin basket edges to "break it loose" from the drive block, and then lift the tub off the block and out of the washer. Good Luck and Thanks Read More...
1 Answer Hello LC! I'm sorry, but the manufacturer has no listed the cubic capacity of the outer tub 63849 or the model LSR6334LQ1. I have, however, verified that the outer tub does work with the model listed. Thanks! Read More...