Gordon M. August 22, 2011 for Model Number MDB6701AWQ1 All Lights come on except the Washer will not start.
1 Answer Hello Gordon. Test and make sure the door latch assembly WPW10130695 is good and the micro-switches are working properly. If so, it sounds like you will need to replace the control panel 6-919822. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. Hope this helps. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html Read More...
1 Answer Hello Gordon! The control panel only includes the control panel and ribbon cable. For a black control panel use part number 6-919822. For a bisque control panel use 6-919822. For a white control panel use 6-919822. Thanks! Read More...
Peter August 06, 2011 for Model Number MDB6601AWW The unit turns on, all the buttons work except the Start/ Cancel button. It started slowly dying for about a week and now it does not start anymore. Do you think it's the control board (electronics)or the panel?
1 Answer Hi Peter. The control panel will need replaced. This part # is 6-919822. Thank you. Read More...
Greg June 30, 2011 for Model Number MDB6601AWW I installed my Panel-Con. The lights don't light and I can't change it from on command i.e. light wash to heavy wash, even though it is now making noise like it's working. When installing I put it in exactly like I took the old one out.
1 Answer Hello Greg. You will need to remove the ribbon cable from the control board and reseat it. Then lock the connector down so it does not come out of the board. Be sure and lift up on the lock, before trying to reseat the ribbon cable. Hope this helps. Read More...