Eagle November 16, 2011 for Model Number LSB6200KQ0 Spin cycle is shooting water near the end of cycle when parts are dry and now they are soaked. Do I need to replace the timer unit?
1 Answer Hello Eagle. Yes, based on the information you provided, it sounds like the timer WP3363892 is bad and will need to be replaced. Hope this helps. Read More...
Gary September 20, 2011 1 to 2 inches of water remains in tub, sometime times I can shake drain hose and the tub empties is the pump bad?
Larry B. August 08, 2011 for Model Number Lsq8520jqo I think pump is leaking; looks like water is coming from pump . if not where to look?
1 Answer Larry, You're most likely correct, the pump is probably leaking WP3363892 The other option, would be a loose or cracked tub to pump or drain hose, Thanks and Good Luck. Read More...
C Gunn July 28, 2011 My washer will fill, agitate then it stops and will not drain or spin. What could it be?
1 Answer Hello C. You will need to check and see if the lid switch is broke or bad on the machine. If so, it can cause the problems your having. We will need your model number to help you more on this. Hope this helps. http://www.appliancepartspros.com/modelnumber_locator.aspx Read More...
Maxd103 April 18, 2011 How do I slow the drain cycle as my washer drains fast into a 60 year old drain line, and backs up? As you know, newer washers have a high speed drain and the older homes have a smaller lines.
1 Answer Hello MaxD103. There is no way to slow down the volume of water going through the drain hose. You will need to repair/replace the drain pipe in the house. Thanks. Read More...