Whirlpool Washer Pump

The Direct Drive Washer Pump is an OEM part for Whirlpool washing machines. It is responsible for pumping water out of the washer during the drain cycle, ensuring that the washing machine drains efficiently after each wash.

Causes of a bad direct drive washer pump can include blockages from debris or foreign objects, wear and tear from regular use, damage to the pump impeller, or electrical issues affecting the pump motor. Over time, these factors can hinder the pump's performance, leading to operational issues.

Symptoms of a bad direct drive washer pump include:

• Washer not draining water properly
• Unusual noises during the drain cycle, such as grinding or humming
• Water leaks from the bottom of the washer
• Washing machine stopping mid-cycle due to drainage issues

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Related item: Motor coupling 285753A.

The Water Pump is an OEM replacement part for Whirlpool washing machines. This component is responsible for circulating and draining water during the wash and rinse cycles, ensuring proper cleaning and rinsing of clothes.

Causes of needing to replace the water pump can include normal wear and tear over time, clogging or obstruction by debris or foreign objects, or mechanical failure due to excessive strain or motor burnout.

Symptoms of a faulty water pump include:

• Failure to drain water from the washer tub
• Leaking or standing water in the washer drum
• Unusual noises or vibrations during operation
•  Incomplete or insufficient water circulation during cycles

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore washing machine models.

The Water Pump is an OEM replacement part for Whirlpool washing machines. It plays a key pump function by introducing water into the wash tub. Proper water circulation is necessary for effective cleaning.

Symptoms of a faulty pump include: 

• Slow or no water filling during wash cycles    
• Water leaks or drips due to cracked pump housing
• Loud grinding or knocking noises during operation
• Error codes for water fill related issues

Causes of pump failure can be due to regular usage over time, mineral buildup inhibiting flow inside the pump, or cracks developing in the plastic housing exposing internal components to corrosion.

This OEM Whirlpool replacement is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models. 

The Washer Drain Pump Assembly is an OEM part for Whirlpool washing machines. This assembly is essential for the washer's ability to drain water out of the drum after the wash and rinse cycles, ensuring clothes are properly spun and not left soaking wet. 

Causes of a malfunctioning washer drain pump assembly can include blockages from small items or debris, such as coins, socks, or lint, that accidentally make their way into the pump. 

Symptoms of a bad Washer Drain Pump Assembly include:

• Water not draining out of the washer, leaving clothes wet
• Unusual noises coming from the pump area, indicating a blockage or damage
• The washer stopping mid-cycle due to inability to drain
• Error codes displayed on the washer related to draining issues

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

This washer drain pump moves water out of the washer during drain and spin. Replacing a worn or failed pump restores proper draining so cycles finish on time and the basket can reach full spin speed.

What it does

• Pumps water from the tub to the household drain during the drain cycle
• Helps resolve standing water, slow draining, or humming from a seized pump
• Reduces long/aborted cycles caused by incomplete draining
• Can stop leaks at the pump body when the housing is cracked

What’s included
One drain pump assembly.

Install notes

• Unplug power and turn off water; bail out remaining water before service
• Clamp/remove hoses and keep towels handy; transfer any mounting bracket as needed
• Inspect and clear the drain hose and tub-to-pump hose before reassembly
• Run a drain/spin test to verify proper flow and check for leaks

This OEM drain pump is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Drain Pump is an OEM part for Whirlpool washing machines. This component is responsible for expelling water from the washing machine at the end of the wash and rinse cycles. Its motor and impeller system push water through the drain hose, helping to ensure that the washing machine empties completely.

Symptoms of a failing drain pump include:

• Water not draining out of the washing machine, leading to stagnant water pooled inside the tub
• Unusual noises, such as buzzing or humming, indicating that the pump motor is struggling
• The washing machine stopping mid-cycle due to inability to drain

Causes of drain pump failure typically include obstruction by foreign objects like coins or socks, motor burnout, or impeller damage. Regular maintenance, such as checking for debris in the pump's filter, can help prevent these issues.

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Drain Pump is an OEM part for Whirlpool washing machines. This component is essential for removing water from the washer during the drain cycle. It ensures that water is efficiently pumped out of the washing machine, preventing water from remaining in the tub after a wash cycle, which is crucial for the appliance's proper operation and the cleanliness of your laundry.

You should replace the drain pump if it becomes faulty or stops working. Common causes of a bad drain pump include blockages from debris or lint, wear and tear over time, or electrical malfunctions. These issues can prevent the pump from effectively draining water.

Symptoms of a bad drain pump include:

• Water not draining from the washing machine
• Unusual noises during the drain cycle, such as humming or grinding
• The washer stopping mid-cycle with water still in the tub
• Error codes related to draining issues on the washer's display

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Washer Pump Assembly, Drain, is an OEM part for Whirlpool washing machines. This component is essential for removing water from the washer tub during the drain cycle, ensuring that clothes are properly rinsed and spun dry.

Common causes of a bad drain pump include blockages from lint, debris, or foreign objects, wear and tear from regular use, and electrical issues such as a burned-out motor. These problems can prevent the pump from effectively draining water.

Symptoms of a bad drain pump assembly include:

• Washer not draining properly or at all
• Unusual noises during the drain cycle
• Water left in the washer after the cycle completes
• Error codes related to drainage issues

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Drain Pump is an OEM replacement part for Whirlpool washing machines. It is responsible for evacuating water from the washer tub at the end of each cycle. The drain pump automatically kicks on to remove dirty water through the drain hose.

Causes of a bad drain pump can include a clogged impeller preventing proper drainage, failing motor windings that cause inadequate pumping, or physical damage affecting pump operation.

Symptoms of a bad drain pump include:

• Standing water not fully draining from the washer tub after cycles
• Water remaining or pooling in the tub rather than being fully pumped out
• Loud buzzing or grinding noises coming from the pump area
• The washer not fully completing cycles and getting stuck in drainage mode

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Drain Pump is an OEM part for Whirlpool top-loading washing machines. Located near the bottom center of the machine, it actively pumps water out of the washer tub at the end of each cycle.

The pump motor spins an impeller chamber to push water through the drain hose and out of the home. Causes of failure include clogging from mineral buildup or fabric fibers within the pumping components. Over time, motor windings experience excess heat and may burn out from consistent drainage cycles.

Symptoms of a faulty drain pump are:

• Remaining water at the bottom of the tub after washing
• Puddles or splashing near the machine during drainage
• Grinding or screeching noises when the pump should be operating

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The Direct Drive Washer Pump is an OEM component specifically designed for Whirlpool brand clothes washers. It works to circulate water inside the washtub during cleaning cycles.

Symptoms of a faulty direct drive pump include:

• Incomplete or insufficient water fills  
• Poor drainage at the end of cycles
• Gurgling or drain issues occurring

Causes involve normal wear over extended usage. Mineral buildup within internal components can decrease pumping effectiveness as well. 

Two large ports with flapper valve. Fits most Whirlpool and Kenmore direct drive washers (no belt models). Related item: Motor coupling 285753A.

Compatible models include some brands produced by Maytag, Jenn-Air, and Kenmore as well.

The Water Pump is an OEM replacement part for Whirlpool washing machines. It plays a crucial role in circulating water throughout the wash cycles and draining the used water from the tub.

Symptoms of a bad water pump include:

• Washer not draining properly, leaving standing water in the tub
• Loud grinding or humming noises during the spin or drain cycles
• Leaks around the pump or connected drain hose
• Error codes or indicators related to drainage or pump issues

Causes of a bad water pump can include clogs or obstructions in the pump impeller, worn-out pump seals or bearings, or electrical malfunctions preventing the pump from operating correctly. Foreign objects or debris can also contribute to pump failure.

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This dishwasher drain pump assembly actively removes wastewater from the tub and pushes it through the drain hose at the end of each cycle. Replacing a weak or failed pump restores proper draining and helps prevent standing water and odors.

• Pumps water out of the dishwasher during drain cycles and sends it through the drain hose to the sink/disposal
• Common symptoms: water left in the tub after a cycle
• Humming or buzzing from the pump with little/no water movement during drain
• Drains slowly, intermittently, or triggers a drain-related error
• Visible damage or a seized/broken impeller on the original pump

• Disconnect power and turn off water supply; protect the floor from spills
• Remove standing water and check the drain hose/sump for blockages before replacing the pump
• Access the pump from the base/front; release the lock (twist or tabs, per model) and transfer the wire connector
• Seat the new pump fully to seal; reconnect, then run a short cycle to check for leaks and proper draining

Restore proper draining with this complete drain pump assembly. It moves water out of the washer during the drain and spin portions of the cycle to prevent standing water, cycle interruptions, and musty odors.

• Pumps wastewater from the tub to the household drain
• Helps prevent standing water and cycle pauses
• Common symptoms: won't drain or drains slowly, humming or grinding from the pump area, leaks at the pump, drain-related error codes
• Direct replacement for a failed or noisy pump assembly

• Disconnect power and shut off water before servicing; have towels or a pan ready for residual water
• Access location varies by model; remove the appropriate lower/front/rear panel to reach the pump
• Transfer wiring and hoses one at a time to the new pump, matching orientation; securely seat clamps and seals
• Inspect and clear the drain hose and filter for debris before reassembly; run a test cycle and check for leaks

The Water Pump is an OEM part for Whirlpool laundry machines. It is responsible for circulating water into and out of the washer during rotation cycles. The pump is designed for reliable and high water pressure output to effectively wash clothes. 

Symptoms of a bad water pump include:

• Reduced or no water filling the washing machine tub
• Loud buzzing or grinding noises coming from the pump motor area
• Does not enter or remain in agitation cycles properly 

Causes of a bad water pump can be wear and tear over time, blockages that reduce water flow, or failure of electronic components that control the pump.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This water pump assembly circulates water through the appliance during active cycles. It restores proper water movement when the original pump becomes weak, noisy, or fails, helping maintain consistent washing performance and coverage. What it does

• Circulates water through the internal system as designed
• Helps distribute detergent and cleaning action evenly
• Symptoms of a failing pump include little/no water movement and poor wash results
• May produce loud humming/grinding from the pump area or show small leaks
• Some models may display error codes related to water circulation

• 1 water pump assembly

• Disconnect power and shut off water before servicing
• Access location varies by model; remove panels as needed and prepare for residual water
• Transfer hoses and clamps to the new pump; ensure tight, leak-free connections and correct orientation
• Reconnect wiring securely, then run a test cycle and check for leaks