Susan G. June 04, 2012 for Model Number mff2557hes How do I take the wiring harness off the old icemaker to put on the new one? Also, how do I take off the metal arm and put it on new one?
1 Answer Hello Susan, The trick is a little screwdriver. Use it to remove the white plastic cover on the front of the icemaker and you will see a clearish white plastic tab on the side where the harness goes into the icemaker. Depress the tab with the little screwdriver and pull and the harness will slide right out. As for the bale arm, use the small screwdriver to pry it away from the back of the control module and it will pop right out. To install it in the new one simply push it in until it bottoms in the hole. If the back end goes through the plastic, put it in the plastic part first. Read More...
Tom W June 04, 2012 for Model Number 4317943 There is a screw adjustment on the right hand side to adjust the amount of water that flows in per cycle. Which way should I adjust it to lessen the amount of water that flows in per cycle?
1 Answer Hello Tom. Back the screw out for less and tighten for more water. Never go more than a half a turn either way. Read More...
Tony June 03, 2012 for Model Number mtb2456aeb Can I use a AP4135008 ice maker kit on my maytag ref,it looks like they are the same ice makers im coming with a new part number of d7824706q and they look alike?
1 Answer Hello Tony. Based on the model number you provided, D7824706Q is the correct icemaker for you model number. Read More...
John June 03, 2012 for Model Number maytag # MTB2456GEW Hi, My icemaker makes cubes but leaks alot of water at the same time into the bucket causing everything to freeze. Water leaks on the left side underneath, not where the water comes in. 2 questions: which would be the correct repair kit to fix it, and second what is causing it. Thank you.
1 Answer Hello John, If the enamel coating on the icemaker is cracked, the ice maker can leak. This is what this complaint sounds like. I would replace the icemaker assembly D7824706Q and the water inlet valve WP61005273 to prevent any more water leaking. Read More...
Jamar1905 May 30, 2012 for Model Number MSD2641KEB I'm trying to find the correct module for my ice maker and the correct new ice maker for the above maytag side by side refrigertor/freezer.
1 Answer Hello Jamar1905. Based on the model number you provided, the correct icemaker is D7824706Q. Read More...
Henry E. May 29, 2012 for Model Number 106-626640 This is no on icemaker module- in Maytag side by side- does not make ice all time - stops making for awhile then starts up for a period of time- just had water coming out dispenser door- took out bin and shut off unit- replaced water valeve 1 yr ago- do I need front module with timer gear or need to replace Ice make refridge is Maytag model MZD2766GE according to model no emblem on door If needs replacing I want to make sure to get right one
1 Answer Hello Henry. Based on the information you provided, it sounds like the icemaker D7824706Q is bad and will need to be replaced on the unit. Read More...
Dan May 26, 2012 for Model Number 106.9722680 Is this Whirlpool part correct for this model number? I did not see this number on the cross-reference list. thank you.
1 Answer Hello Dan, for the complete icemaker replacement you will want to order part number 4317943. Thanks! Read More...
David E May 26, 2012 for Model Number KSRS25IKWH01 Which ice maker is correct for my KitchenAid (ice bin in the door), AP2984633 or AP3182733? Item Number: AP2984633 Number on my ice maker motor is IM#S 106 626636, and cover is 4317943. When I search these part numbers, I get this replacement Item Number: AP3182733. When I search my refrigerator model, I get this replacement. Thank you.
1 Answer Hello David! The replacement icemaker needed for model KSRS25IKWH01 is part number 2198597. Thanks! Read More...
Cindy L. May 25, 2012 for Model Number 10671202100 Is this ice maker the correct replacement for a Kenmore 10671202100?
1 Answer Hello Cindy! Yes, the whirlpool icemaker kit part number 4317943 is the correct replacement icemaker used on your Kenmore model 106.71202100. Thanks! Read More...