Customer Questions and Answers for Replacement Icemaker by Whirlpool

Hello Linda, could you please recheck the model number you've provided? It does not appear in any database as valid, here is a link to our model number locator tool: http://www.appliancepartspros.com/modelnumber_locator.aspx . Thanks!

Hello Kenneth! You will need to replace the water inlet valve. Your part number is 4318047. Thanks!

Hello Ken. There is not a specific icemaker approved for your model. You would need a complete add on unit. Whirlpool has two listed depending on the age of the unit. If it was made between '84-'93 the one you would need is 1129316. If it was made after '93, you would need [AP312234]. I hope this info helps!

Hello John, unforunately we currently do not stock parts for ths the sub zero brand unit. You will have to contact the manufacturer directly for support. Thanks!

Hello Kurt. Yes, 4317943 is the replacement icemaker for the model number you provided. Hope this helps.

Hello J.D.R! For the GE model you have supplied you will need icemaker part number WR30X10093. Thanks!

Hello Phil! The model number supplied, KTRC19MCKL00, does not match any models in our records. Most refrigerators do have water filters that needs to be changed at least every 6 months. Please double check your model number and resubmit. Thanks.

Hello Ernie. All parts for the housing are available for this auger. I believe the part you are referring to is part 28, the drum 4388736. I will include a link to the diagram in this message. I hope this info helps! http://www.appliancepartspros.com/partsearch/model.aspx?model_id=250660&diagram_id=28209626#d28209626

Hello Dean&dog. To adjust the freezer door, you will need to use the hinges and leveling legs. Make sure the unit is level. If not use the screws behind the toe panel to level the refrigerator. You can loosen the screws on the top of the freezer door hinge and move the door if needed. If the unit is not letting in enough water for the icemaker, you can remove the cover from the icemaker. There is a white plastic adjustment screw on the side of the icemaker module. Turn this screw for more or less water. If the heater shows continuity, it is good. The heater does not always glow red. Hope this helps.

Hello Karen. If you disconnect the fridge from the power outlet will the water stop flowing or continue? If it continues, you will have a defective water valve WP2315576. Most of the time the overflow of the icemaker is due to a defective water valve. This answer was located on our Repair Forum, this is a free service in which technicians will assist with answering repair questions for our customers. Please use this link to assist in your repair: http://forum.appliancepartspros.com/refrigerator-freezer-repair/176534-icemaker-overflow-removal.html . Hope this helps!