Dane B. April 01, 2013 for Model Number Maytag MAH4000AWQ Are the inner and outer wash tub bearings available for this model of Maytag Neptune washer? Thank You!
1 Answer Hello Dane. WP22002934 is the front bearing and WP22003441 is the rear bearing. You will need to order the seal 12002022. Read More...
Nello March 12, 2013 for Model Number mah5500bww On the spin cycle loud metallic noise sounds like bearing issue. Took belt off motor seems fine.
1 Answer Nello, Yes, a loud metallic noise during the spin cycle would be a bad bearing and you would need to replace the outer tub 22004465. Read More...
Joe January 04, 2013 for Model Number mah5500bww I need to replace inner and outer bearing and seal. Starting with the outer, snap ring removed, with a wood dowel I can not get it to move (inside tub hitting out) Any pointers . PS and is there a snap ring for the inner and do I go out side in.
1 Answer Hello Joe, To remove you will probably want to use a metal punch and work around the bearing. Do not try to stay in one place on the bearing because you can damage tub. When you do the inner you will go from outside in. The inner does not have a snap ring for it. Read More...
Jim W December 03, 2012 for Model Number MAH 3000 AWW S/N 33115221UY With even a light load the washer will not balance. When it starts a spin out it does not balance and sensors kick out as they should. I have replaced the struts and springs which helped some but still will not finish spin out 90% of the time.
1 Answer Hello Jim, You may want to pull the baffles out of unit and check to make sure that the bolts on the spinner assembly are tight and in place. If the bolts on the spinner are loose or broken off then it will cause unbalanced loads. If the bolt has broken off then you will need to replace the spinner support W10181639. Read More...
Dan August 19, 2012 for Model Number MAH5500B My wife's washer will go through a wash cycle but will only hum when it is going into a spin cycle. The washer will spin very slowly but will not remove water from the tub. Where would be the best place to start looking?
1 Answer Dan, With your post description, the best place to start would be the motor control 12002039 and harnesses. There are other components and circuits involved for a proper high speed spin. We'll be sending you some additional information, that should help you out. Read More...
Jerry August 18, 2012 for Model Number MAH5500BWW I'm having a loud spin cycle. From what I can read it's time to replace the bearings. Everyone wants to sell me the inner tub assembly but all I need are the bearings. Help please
1 Answer Hello Jerry. WP22002934 is the front bearing and WP22003441 is the rear bearing assembly. Read More...
Luis C August 12, 2012 for Model Number MLE2000AZW Hello; My Washer made a loud noise during the "spin-cycle" and now there's a groweling sound when it spins, i'm an auto-mechanic by trade and it sounds like a bearing noise to me. I opened the rear of the washer took off the belt and spun the (flywheel?) around, i noticed there is a vent hole in the rear of the spinner where the bearing is and there is a lot of metal coming out of the hole, is this normal? Do i need a bearing? Please help.
1 Answer Hello Luis. No, based on the information you provided, you need to order the lip seal 12002022 and replace it in the unit. Read More...
Norman June 15, 2012 for Model Number mah5500bww The spinner has a plastic piece lip the front. Is that available separately? That looks like what I need. My wife washed a pair of tennis shoes an it caught between the spinner and the door and cut the plastic piece attached to the front spinner. Thanks.
1 Answer Hello Norman! The manufacturer does not offer the balance ring separate from the spinner assembly 6-2717080. Sorry about that! Read More...
1 Answer Hello Gwen! Unfortunately, we do not have any information regarding the weight of parts. Sorry! Read More...
Paulo August 12, 2011 for Model Number mah4000aww My maytag front loader is making a awful noise on the spin cycle. Help
1 Answer Hello Paulo. If the noise you are hearing is a roaring sound, you will need to replace the outer tub assembly 22004465. This is a sign of bad bearings in the washer. Hope this helps. Read More...