Kennyz July 27, 2016 for Model Number AK2H30E3 Amana electric cooktop with radiant & halogen elements My cooktop lists 3 different infinite switches used on this model. 2 elements are halogen, 1 is a dual radiant element and the 3rd is for a single radiant element. WP32064502 is the replacement for the single radiant element. Can it be used for the dual element as well or is there a replacement that can be used. Can the WP32064502 be used for the halogen elements?
1 Answer Kenny, The dual element switch is part number 0309550 but unfortunately has been discontinued by the manufacturer with no suitable replacement. Read More...
Kelly November 01, 2015 for Model Number ARR6300LL I have just replaced the switch on an older Amana stove but the original knob does not fit the stem. What is the part number for an almond knob for switch part #32064502?
1 Answer Kelly, Unfortunately the knob for your unit has been discontinued by the manufacturer with no suitable replacement available. According to the manufacturers parts list it shows that you received the wrong infinite switch for your unit. The correct switch part number should be WP74011243. Read More...
Robert August 26, 2015 for Model Number AK2T30E4 On the switch #32064502 , what screws hold it in place
Stacy April 08, 2015 for Model Number AK2T36W2 I need the inf switch for the right front burner, which switch do I need? Thanks in advance Amana # AK2T36W2.
1 Answer Stacy, the replacement infinite switch for the right front burner is part number W11121639. Thanks! Read More...
Jerry J January 02, 2013 for Model Number fdu 185 I need the LEFT switch for slo cook . I found a place that has a switch on the right for the light. Will it work ? If not where can I find one
1 Answer Hello Jerry. Sorry, the switch you are needing 0060524 has been permanently discontinued by the manufacturer and we don't know of any source or replacement for the part. Read More...
Walter August 24, 2012 for Model Number Amana model AK2T30E4, MFG P1143721N E, PIC 1102060502 My rear right burner does not work. I purchased the switch part no AP4041826 from you. This did not fixed the problem. Could you help? Regards, Walter
1 Answer Hello Walter. If the switch is new, and it does not work, you will need to replace the element W10823699. Make sure the wiring is good in the unit as well. Read More...
Peter April 23, 2012 for Model Number Jenn Air cook top model A105, A105-8 will this switch work for this cook top
1 Answer Peter, The model number you supplied is for the cooktop "burner cartridge" not the cooktop. the model and serial number plate is usually located on the right front corner of the base of the cooktop, or on the front cover plate of the d/d blower housing. The more common infinite burner switch on a J/A cooktop is W11120791 but we need the model number of the cooktop to be sure and proper. Thanks Read More...
Klee March 29, 2012 for Model Number FDU248 Hi, will this switch work on my Modern Maid FDU248 range?
1 Answer Klee, the infinite switch W11121639 will work on the Modern Maid FDU248* models. Thanks! Read More...
Cliff December 28, 2011 for Model Number Amana AK2T30 Hi, One of my burners has trouble turning off. Fiddling with the associated switch eventually does the trick, but otherwise the burner tends to stay on high. Does this switch (WHIRLPOOL Switch, Inf 240p - 1243) (Part Number: AP4041826) appear to be the culprit, and the proper repleacement? Thanks, Cliff
1 Answer Hello Cliff. Yes, based on the information you provided, it sounds like the switch W11121639 is bad and will need to be replaced. Hope this helps. Read More...
Esther H. September 20, 2011 for Model Number ART 6600E P1143405N E On all 4 burners of my glass cooktop; when I put the knob on high---and then I turn them down to low they will not turn down to low, they stay on the high temperature? What part would this be? I dont think its the infinite switches because I never use the back burners and its also happening on them also. The burners seem to want to stay on high, even when I turn them down to low. Please help, Esther
1 Answer Hello Esther. You will need to look for a shorted wire. If there are none, you could have a bad switch W11121639, that is sending the worng power to the others. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. Hope this helps. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html Read More...