Marcus June 30, 2014 for Model Number ED5GTGXNQ14 before i order this part Im confused where to land the wire for a whirpool ED5GTGXNQ? thanks in advance, the video looks pretty easy.
1 Answer Marcus, The black lead wire coming off the motor will connect to the terminal labeled number 1. Read More...
Amy June 29, 2014 for Model Number RS22AQXMQ00 Im having problems with my fridge, I replaced the deforst timer and the cold control, And now the motor isn't click on.. its been over 12 hrs and it bearly cool.. what is the next thing I should do? How can I determine what parts I need?
1 Answer Amy, You will want to make sure that the black lead wire on the timer motor goes to the pin numbered 1. If not then the unit will not work properly. Also you will want to check to see if the coils in the freezer compartment are impacted with ice. If so then the issue would be a defrost issue in which you can put the timer into the defrost cycle and see if the heater comes on if not then the heater or the defrost thermostat would be faulty and need to be replaced. Read More...
Sue June 16, 2014 for Model Number 1068552680 I had a Kenmore Coldspot that quit cooling. I replaced the thermostat. That didn't help. I replaced the defrost timer. Now it cools but the freezer frosted up. Which option for wiring in the defrost timer is correct for model 1068552680?
Donnie June 10, 2014 for Model Number ED22PWXBN00 How long should this Frig/Freezer stay in defrost? Also what terminal should the black wire be on for this model?
1 Answer Hello Donnie. On average it is 20 to 30 minutes. The wire goes onto terminal number 2 of the timer. Read More...
Jeff June 02, 2014 for Model Number ED25SM1LNR1 Got the defrost timer and want to confirm where the black wire goes on 1 or 2. my Whirlpool model number is ED25SM1LNR1
1 Answer Hello Sherali. We will need your model number to help you with this. Please call 1-877-477-7278 or post your model number with a new question on the parts page. http://www.appliancepartspros.com/modelnumber_locator.aspx Read More...
David May 31, 2014 for Model Number ED25SM1LNR1 Replacing defrost timer in an old Whirlpool fridge model ED25SM1LNR1. I see that the replacement part has the black wire with options to place on the timer. Which one would it go one for this model. Could not find info on your site and missing diagram. Thanks for your help
1 Answer Hello David, The loose black lead will need to connect to terminal "1" on the defrost timer for a continuous run application. Read More...
Sue May 28, 2014 for Model Number Kenmore Coldspot 1068552680 side by side made 10/1989 We went away for the weekend. When we got back, the frig light was working, but the compressor and fan had quit. Everything in the freezer thawed out. After we had the frig door open about 15-20 minutes getting all the food out, the compressor and fan came back on by themselves. We called a repair man and he replaced the cold control, which I thought was called the thermostat. It has the long wire coming off it. It cooled over night, but compressor and fan stopped working again sometime the next day. We took off the top panel and wiggled the defrost timer, and the compressor and fan started working. It could have been from wiggling it or maybe because the door was open and the inside temp got to about 70 degrees. Is it the defrost timer or something else?
1 Answer Hello Sue. It sounds like the timer is bad and will need to be replaced on the unit. Read More...
Burgeme May 28, 2014 for Model Number Roper RS25AQXFW02 I first replaced the defrost timer kit (#482493) and kept the old one around for a while thinking I may have put the extra wIire on in the wrong place. It seemed to work fine so I threw the instructions away. We later noticed that the temperature control thermostat was acting up so I replaced that as well. Low and behold - the coils still ice up and the fridge side does not get cold. I've deiced the coils now 3 times with a blow drier and all seems fine for about a week. Can anyone please tell me where the extra wire on the defrost timer kit should go on a Roper RS25AQXFW02? I don't even remember what terminal I put it on. Also, would this refrigerator be considered a 'continuous run application, a 'cumulative version 1' or a 'cumulative version 2'? Just a little extra info - When the fridge was still plugged in, I had the cover off to get to the coils. I put the defrost timer in defrost mode (manually) and the defrost heater did turn on and started melting the ice. I have not replaced the defrost thermostat as it seems to be working - when the coils are iced over, I removed it from the coils and held it in my hand to warm it up. I heard (felt) it click once warmed up. Thanks in advance for any response. - Mike
Randy May 21, 2014 for Model Number Amana SLI22F-L Can you confirm which terminal I place the black wire onto?