Kyle S. July 17, 2011 for Model Number mde7400ayw I have an mde7400 ayx dryer ser # 24929163et. The timer knob came off and looks like the plastic piece that holds the knob on is cracked Have to start it w/ vice grips. The timer never worked right either. Do you have the parts for the plastic piece, knob, and timer or the whole assembly. Thanks. Kyle
1 Answer Hello Kyle. Based on the information you provided, you will need to order 22004165, WP22003993, WP22003989 and WP33002803. Hope this helps. Read More...
Becca July 14, 2011 for Model Number MDE6400AYW Is part #AP4043083 (timer) the right part for the Maytag Atlantis?
1 Answer Hello Becca! To verify the correct timer used on your Maytag Dryer model MDE6400AYW we will need your appliance serial number. Thanks! Read More...
B.K. June 16, 2011 for Model Number MDE7400AYW serial # 19729133CJ I have to play around with the knob wiggling it before it starts. It is a hit and miss thing. It also only works on one time setting. Now it will not start at all.
1 Answer Hello BK! It seems that the timer will need to be replaced. Your part number is WP33002803. Thanks! Read More...
Jim June 10, 2011 for Model Number MDG7658BWQ I have the same problem as many I have already read. When you pull the on/off switch the dryer does not turn on unless you jiggle it or turn it in a different popsition. I am pretty sure I need a timer, for the contacts went bad. So which part number do I need? The number on the part is 3139B MAYTAG 63720660M285 KINGSTON 71016-A03214. Also, how do you remove the old timer? Thanks, Jim.
1 Answer Hello Jim! The timer is part number WP33002803. Here are the instructions from the manufacture on how to remove the timer, you will install in reverse order. Thanks! 1. Disconnect power to the appliance. 2. Carefully lift the timer knob and dial off the timer shaft by pulling the knob away from the face of the control console. 3. Remove the two timer mounting screws (now exposed on the control console) when the timer dial skirt is removed. 4. Disengage the console assembly from the top cover and roll forward. Read More...
Jeff May 14, 2011 for Model Number Maytag Atlantis Model MDG7460AWW DRYER SN.19168217CJ My dryer will not start, for awhile when I pulled the knob and rotate the knob several times from different angles power will come on, now it seems no contact to power the dryer. What do think the problem, do I need a new timer? If so, please provide me the information I need. Thank you
1 Answer Hello Jeff. From the information you provided, it does sound like the timer is the problem. Here is the part number according to the model and serail number you provided WP33002803. Hope this helps. Read More...
Bob May 13, 2011 for Model Number MDE 7400 AYW ser #19703767c1 Have to wiggle the timer knob to get it to start.
1 Answer Hello Bob. It sounds like the contacts inside the timer are bad, and you will need to replace the timer WP33002803. Hope this helps. Read More...
Phil M. May 06, 2011 for Model Number MDE7400AYW The pull switch for my dryer serial #12710259AX has stopped working after having to play with it to turn on. What part # do I need to replace. Thanks.
1 Answer Hello Phil! If it is the actual switch that is not working, you will need the timer. Your part number is WP33002855. Thanks. Read More...
Sean April 30, 2011 for Model Number mde6400ayw Dryer will run through all cycles, but will not shut off at the end. Not sure which timer to order. S/n is 12505039av. Thanks!
1 Answer Hello Sean! For your model and serial you will need timer part number WP33002855. Thanks. Read More...
Dyann S. April 17, 2011 for Model Number MDG6400AWW The knob on the dryer will not turn on unless we sort of jiggle and jimmie it. My husband believes that we need a new timer. Please provide me with the correct timer model. The serial number of the dryer is 19656401CG. Thank You very much!
1 Answer Hello Dyann. Here is the correct part number for your timer WP33002803. Hope this helps. Read More...
1 Answer Hello Ron. According to your serial number, WP33002855 is the correct part number for your model. Hope this helps. Read More...