Andy March 22, 2012 for Model Number MDE6400AYW How do you remove the start knob from the timer? I don't want to break anything.
1 Answer Hi Andy. On the back of the timer there is a shaft that is in the center of the timer. Use a small flat screwdriver to carefully lift the flat shaft off the back of the timer to pull it out of the back of the timer. This will release the timer knob. Then you pull the knob off from the front. After the timer part # WP33002855 replacement, make sure the shaft is fully pushed in flush in the timer back. Thank You Read More...
Jen March 08, 2012 for Model Number MDG6400AWW Serial # 19660297CL. I see that there are two different timers for this dryer. Which is the right one?
1 Answer Jen, according to your model and serial number the dryer timer is part number WP33002803. Thanks! Read More...
David H. March 04, 2012 for Model Number I need to replace my dryer timer for model # MDG7400AWW. There are two timers listed (part AP4042974 I need to replace my dryer timer for model # MDG7400AWW. There are two timers listed. Can you tell me which I need (serial number of dryer is 10531893AT)?
1 Answer David, according to your model/series the timer you will need to use is part number WP33002855. Thanks! Read More...
Rob February 12, 2012 for Model Number MDE 7400AYQ SN 24243183EG My Dryer has become increasingly hard to start, however, once started it works fine. Assuming the start switch is integrated into the timer control, I need to get the appropriate timer. I believe I've narrowed it down to one of two parts numbers AP 4043083 or AP 4042974. I've not had much luck with coin-flipping, so I'm looking for some good counsel here! THX
1 Answer Hi Rob. Because your serial #'s start w/ 24......... your timer is part # WP33002803. Thank You. Read More...
Andrew January 18, 2012 for Model Number MDE6400AYW Just installed one of these in my dryer- serial# 19499297CE. It turns the dryer on and off, but does not automatically stop, even in timed mode. Also, when I open the door, the dryer does not stop automatically. Is the timer defective, do I need to move a contact on the plug, I called Whirlpool and they verified that timer 33002855 is the correct item.
1 Answer Hello Andrew. Based on the model and serial number you provided, you have the wrong timer. You will need to order WP33002803 for the correct timer. Hope this helps. Read More...
1 Answer Hello AB. Based on the model and serial number you provided, you need to order WP33002855 for the correct timer. Hope this helps. Read More...
Pete December 05, 2011 for Model Number MDE7400AYW My timer workes when it is on but turns on hard and is getting worse. If I replace timer which one do I need My serial NO. is 12716170CA THANKS
1 Answer Hello Pete. Based on the model and serial number, WP33002855 is the correct timer. Hope this helps. Read More...
Diane October 29, 2011 for Model Number Mde8400ay Our dryer only will turn on intermittently and with a great deal of effort. The SN is 12469990ax. Do we need to replace the timer? If so, which part(s)do we need to order? Thanks!
1 Answer Diane, the first check should be the door alignment, and the door switch and wiring. You'll need to remove the front panel and power to the dryer. Then proceed to the timer. If you can get us a complete model and serial number, or numbers off the original timer, we can assist you with the proper timer needed for your dryer, there are several timers for your unit. Thanks and Good Luck Read More...
Paul September 08, 2011 for Model Number MDE7400AYW Serial 1972 3374 CE No Series number Is the correct TIMER replacement AP4042974? The one in my unit looks like the pic on your website. Thanks!!! Paul
1 Answer Hello Paul. According to the serial number you provided, WP33002803 is the correct timer. Hope this helps. Read More...
Phil July 23, 2011 for Model Number MDE6400AYW I'm looking to replace the timer switch/timer clutch on my dryer. Your diagrams shows item #7. Well there are two #7 parts shown, they look the same but are called different names. How do I know witch one I need?
1 Answer Hello Phil! There is a series change within the model. We will need your appliance serial number to verify the correct timer needed for your Maytag Dryer model MDE6400AYW. Thanks! Read More...