Parts for Columbia 21AB455C897 / 2015: .Quick Reference Parts

This replacement part is a throttle knob. This part is a genuine replacement part made by MTD. This part is typically found in lawn mowers and assists the user in controlling the throttle of the machine properly. The throttle then adjusts the settings inside the engine so that the user is able to control the speed and power of the appliance. A new throttle knob might be needed if the current one is damaged or missing in any way. It is possible that over time this part might become worn down with normal wear and tear and need to be replaced. This part is made of durable plastic and should be fairly simple to replace. This throttle knob is sold individually and is sourced directly from the manufacturer. This part is also a genuine OEM replacement part to ensure proper fit and long-lasting use.

A fuel tank cap assembly prevents contaminants and particles from entering the gas tank and causing problems with the carburetor or engine. The cord between the insert and the fuel cap is meant to prevent the loss of the fuel cap. However, over time the cord can wear out and break. The threads on the cap can also become worn down or swell from heat. When this occurs, consider replacing the fuel tank cap assembly. The replacement job is easy and should not need any tools, except maybe some vice grips to remove the old fuel tank cap assembly. This fuel tank cap assembly will work in conjunction with many different types of lawn and garden maintenance equipment. Most have a small engine, like lawnmowers, tillers, and log splitters. Some of this equipment is produced by the brands Craftsman, Cub Cadet, Honda, Huskee, Lawn-Boy, Mastercut, MTD, Murray, Troy-Bilt, and Yard Machines. It is a genuine OEM part.

This replacement part is a clutch cable for lawnmowers. The clutch cable is the cord that allows the mower to switch the gear settings of the engine. If the mower is no longer switching gears properly or is not cutting as efficiently, the clutch cable might need to be replaced. Luckily, this is a relatively simple process.To replace the clutch cable, turn the ignition switch off. Lift the mower hood and disconnect the spark plug wire. Pull off the clutch lever handle and remove the air duct mounting screws and pull off the air duct. After that, remove the fuel tank out of the way. Remove the clutch lever assembly mounting screws. Pull the lever through the dash opening to release the clutch lever assembly from the dash. After that, access the cable connection. Once accessed, release the tension spring from the pin. Remove the washer and release the cable from the pin. Release the cable retainer locking tabs and remove the cable from the support bracket. Then replace it with the new clutch cable.This genuine OEM part is sold individually and is compatible with MTD brand lawnmowers.

This part is a replacement foam handle grip for lawn mowers and tillers. It is a piece of foam that fits over the metal handle of the lawn mower or tiller. The foam handle grip provides cushioning for the person operating the equipment. Using a lawn mower or tiller with a worn or missing foam handle grip can cause hand discomfort, blistering, fatigue, and more. The foam grip may wear out, crack, or tear over time or with heavy use. The foam handle grip may also degrade through exposure to extreme weather conditions, such as heat, rain, wind, and cold. A visual inspection can help determine whether it is time to replace the foam handle grip. If the foam handle grip is worn, cracking, or torn, it should be replaced. To replace the foam handle grip, take apart the handle of the lawn mower or tiller. Then, remove the old grip. Finally, lubricate the handle or the inside of the new grip. This will make it easier to get the new grip onto the handle. Once the new grip is in place, reassemble the handle of the lawn mower or tiller. This foam handle grip is an OEM part sourced directly from the manufacturer, and it is sold individually. It is compatible with lawn mowers and tillers made by Craftsman, Cub Cadet, Ryobi, Yard Machines, MTD, Huskee, Yard-Man, and MasterCut.

A tiller can ease pre-planting preparation difficulties such as breaking up compact soil manually. Available in front-tine or rear-tine, this versatile machine's main component is the tines. This part is responsible for loosening the soil. It consists of four rotating metal blades in a unique curved shape in opposing directions. The standard layout of tines is that two blades are curved towards the tiller while the other two are pointing away. This blade configuration prevents soil build-up and is more efficient at digging. Even one damaged blade could drastically reduce the efficiency of a tiller. Several tines may be needed depending on the severity of the tiller tine damage. We carry brand-new tiller parts manufactured by MTD. This genuine OEM part is an all-metal replacement designed for tillers from MTD, Yard-Man, Cub Cadet, Ryobi, and Yard Machines. A wrench is the only tool needed to install this replacement successfully. The required bolts are not included in this purchase. The articulating tine is sold individually.

This replacement part is a hand-held oil pump, and it is intended for use in different types of lawn equipment. This is a genuine replacement part made by MTD. This oil pump is small and portable and is able to assist the user during oil changes in their lawn mowers. Oil changes are a normal part of maintenance for many lawn mower models and this oil pump will facilitate that.A user might require a new oil pump if the old one is damaged. This part with the lawn mower at purchase, so it may need to be purchased after the fact. It makes changing the oil inside of the engine very easy.This hand-held oil pump is sold individually and is a genuine OEM replacement part sourced directly from the manufacturer. This device can come in handy for those looking to change the oil in their lawn mowers.

This MTD 17211-ZL8-023 Air Cleaner is used in lawnmowers to help prevent dirt, dust, and other debris from contaminating the carburetor and damaging the engine. A lawnmower's air filter is typically housed in a plastic or metal case and usually mounted on top of the engine. It comes in paper, foam, or a combination of the two. The foam filter can be cleaned with water and detergent, while the paper filter requires replacement at least once a year. If the air filter is clogged or dirty, the engine may not start or may run rough. In this case, the filter needs to be replaced to breathe new life into the engine. Regular maintenance is essential and installing a new air filter can help keep the engine running in top condition. Aside from lawnmowers, this MTD air cleaner can be used in log splitters, pressure washers, generators, and tillers. It is also compatible with other brands like Briggs & Stratton, Craftsman, Cub Cadet, Honda, Huskee, Lawn-Boy, MasterCut, Toro, Troy-Bilt, Murray, Yard Machines, and Yard-Man. It is an OEM part sourced directly from the manufacturer and is sold individually.

This is a genuine replacement wheel assembly for several tillers. The wheels on a tiller allow the machine to move forward and backward. They roll as the tiller breaks up the soil, and help the operator to travel across the ground. Sometimes, wheels lose their seal or become damaged, which causes the tire to lose pressure and flatten. If the pressure in each tire differs, it will cause the tiller to pull to one side while operating. This makes it very difficult to control and till in a straight line. In this case, the tire may need replacing. Replacement is simple and fast and doesn't require any tools. Remove the pin in the center of the wheel, lift the front of the tiller, and remove the tire from the axle. Slide the new tire onto the axle, line up the holes and install the pin. This can be done in a matter of minutes.This genuine OEM replacement tiller wheel assembly is sold as an individual part and is shipped directly from the manufacturer. This part is compatible with several tillers made by MTD, Yard Man, Troy-Bilt, Cub Cadet, and Husky.

This is a V-belt made for use with several tillers made by various manufacturers. It is the component responsible for rotating the tiller tines in the tiller, and it is the primary belt used in the equipment. Each belt is made of durable rubber but can break, wear out, or stretch out over time. If these things occur, the V-belt will need to be replaced to ensure the tiller continues to do its job.As the tiller is used more often, it becomes more likely that the V-belt will need to be replaced. Mechanical failures and other issues can sometimes cause the V-belt to wear out quicker than usual. If the V-belt has become overly worn, it can cause the tiller to perform poorly since the belt might slide off of the pulley. If the belt breaks entirely, the tiller will no longer run. Before replacing the belt, remove the spark plug wire and drain the fuel.This is a genuine OEM replacement V-belt that is directly sourced from the manufacturer. It is made for use with tillers manufactured by Yard-Man, MTD, Yard Machines, Craftsman, Ryobi, Huskee, MasterCut, and Cub Cadet.