Parts for Remington 25A-26J7783 / 2014: .Quick Reference Parts

Fuel filters are created to strain out gas before it reaches the carburetor in lawnmowers and other gardening tools. Located in the fuel line or the fuel tank, it prevents unwanted debris from reaching the carburetor, which can cause engine damage. If the fuel filter is damaged or becomes clogged with material, it no longer offers the same protection to the carburetor. This can lead to difficulty starting the lawnmower and decreased performance. Correcting this issue early can prevent damage that might require a new lawnmower. Maintenance of the lawnmower by adding fuel stabilizer, changing the oil, and replacing the air filter will increase the life of lawn care equioment. Even if no issues are present, the fuel filter should be replaced after about 200 hours of use. Disconnecting the spark plug should be done prior to installing a new fuel filter. This fuel filter is a genuine OEM component directly from the manufacturer and comes as an individual part. It can be used with various Craftsman, Cub Cadet, Murray, Yard Machines, MTD, Huskee, Bolens, Yard-Man, and Mastercut lawnmowers, tillers, blowers, and wood chippers.

The spark plug takes in power from the battery and generates the spark that will keep the combustion engine running. Spark plugs need to be replaced annually as a part of regular maintenance. In the event that the engine is not idling correctly or keeps stopping and starting, the spark plug may need to be replaced immediately. This is a simple replacement that involves removing the spark plug boot and taking out the old plug, then screwing in the new plug, and replacing the boot. The spark plug requires an open-ended wrench or special spark plug socket to replace. This OEM spark plug replacement is made by MTD and is compatible with edgers, lawnmowers, log splitters, trimmers, and other garden engines. It can be used on compatible Craftsman, Cub Cadet, and MTD engines. This unit is sold as a single plug.

This replacement part is a hand-held oil pump, and it is intended for use in different types of lawn equipment. This is a genuine replacement part made by MTD. This oil pump is small and portable and is able to assist the user during oil changes in their lawn mowers. Oil changes are a normal part of maintenance for many lawn mower models and this oil pump will facilitate that.A user might require a new oil pump if the old one is damaged. This part with the lawn mower at purchase, so it may need to be purchased after the fact. It makes changing the oil inside of the engine very easy.This hand-held oil pump is sold individually and is a genuine OEM replacement part sourced directly from the manufacturer. This device can come in handy for those looking to change the oil in their lawn mowers.

This is an air filter that can be used with lawn and garden equipment. The air filter plays an important role in mowers, trimmers, and more. It prevents airborne contaminants like dirt, dust, leaves, and other debris from getting pulled into the engine. Air filters should be checked regularly and replaced when they become dirty, or if they are punctured or otherwise damaged. This is a quick repair that should take only a few minutes to complete.The air filter will work with lawn mowers and trimmers from MTD, Yard-Man, Troy-Bilt, Yard Machines, and Cub Cadet. The piece is sold individually. It is a genuine OEM replacement part that has been sourced from the manufacturer.

This part is a trimmer line that is used on wheeled string trimmers. The trimmer line is the string that is used to trim the grass or weeds. The trimmer head spins at a fast rate, which causes the string to cut the grass or weeds.A new trimmer line will be needed periodically as routine care and maintenance on wheeled string trimmers. How often a new trimmer line will be needed depends on how often the wheeled trimmer is required to be used. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment. Never perform care and maintenance on outdoor power equipment that is powered on.This trimmer line is a genuine MTD part. It is sold individually. This particular trimmer line is compatible with wheeled line trimmers that are manufactured by MTD and Cub Cadet.

This control cable is a genuine MTD part, sold individually. This control cable can be used as a replacement part in a string trimmer. The purpose of the control cable in a string trimmer is to allow the operator of the appliance to propel the appliance forward or stop the appliance by engaging or disengaging the cable.The control cable could be frayed, dented, warped, ripped, torn, or eroded, and if this occurs to the point at which the control cable cannot control the motion of the appliance, the control cable should be removed and replaced by this genuine OEM replacement part for continued safe use of the string trimmer. Always unplug the appliance before performing any kind of repair or replacement.Sourced directly from the manufacturer, this component is a genuine replacement part that is sold individually. This control cable is compatible with the following outdoor appliance brands: MTD and Cub Cadet.

This is a wheeled string trimmer belt compatible with many brands. The belt's purpose is to drive the unit, transferring power from the engine to the cutting head. Over time, belts are subject to wear and tear, heat, and humidity. This can make the belt brittle and eventually it will snap. In other instances, belts will stretch after being used for long periods and need to be replaced. Replacing the belt is a simple process. Start with the engine off and the spark plug disconnected. Remove the screw holding the chassis cover in place and then the screws holding the debris shield. With the debris shield out of the way, the belt should be clearly visible. Remove the engine pulley, but make sure to note the pulley's position for replacement. Install the new belt and reassemble the trimmer. This part is a genuine OEM part sourced directly from the manufacturer and sold individually. This belt is compatible with Craftsman, Bolens, Remington, Ryobi, and Yard-Man brands.

This fuel cap assembly can be used to easily replace a worn-out or broken fuel cap.Fuel caps have one primary purpose, to keep fuel in the fuel tank and prevent it from spilling or becoming contaminated. This fuel cap is made of top-quality, durable plastic and includes a retainer that fixes to the neck of the tank itself to prevent the cap from becoming detached. Fuel caps are essential, as without them, the fuel in the outdoor equipment machine can easily become filled with dirt and debris that can contaminate the engine and cause more serious problems. This fuel cap assembly is a genuine OEM replacement part that has been sourced directly from the manufacturer. This replacement fuel cap fits various different MTD, Cub Cadet, Craftsman, and Yards Man models of lawn mowers, log splitters, and trimmers. Please note this fuel cap assembly is sold individually.

A wing knob is an essential but often overlooked piece of equipment used on many gasoline-powered lawn tools. On snowblowers, this versatile connector is used to adjust the exit chute. The knob handle is easily gripped and made of durable plastic, so when wearing mittens or thick gloves, one can still grasp and turn the wing knob. On many lawn mowers, the wing knob is used to secure and adjust the handle to the mower or, with mowers that have folding handles, to lower and store the handle for ease of transporting the mower. While it does not seem that one would ever need to replace a wing knob, these fasteners may be lost when mowers are moved from one lawn to another or when the mowers are being stored until the next growing season. On rare occasions, the threads in a wing knob can be stripped if they are not turned tightly enough when first fastened after unbending mower handles. These devices are inexpensive and virtually universal, so it is wise to keep an extra wing knob on hand in case one becomes lost. The wing knobs fit Yard-Man, Troy-Bilt, Craftsman, Bolens, and Yard Machine mowers and snowblowers. Made of durable plastic, these OEM knobs are genuine manufactured replacement parts that perfectly match the originals.