Parts for Bosch SHE68E05UC/01: Rack Assembly Parts

Dissolves limescale, mineral deposits, and odor-causing residues from dishwasher tub and spray system. Use monthly to maintain peak cleaning performance.

Replacement dishwasher water tube channels water between components. Replace if cracked, clogged, or leaking. Confirm fit with your model number.

Replaces the rotating spray arm shower head in your dishwasher's upper rack. Install a new one if yours is cracked, broken, or keeps falling off the tube.

Dishes not getting clean? A cracked or clogged spray arm prevents proper water distribution. This replacement part restores even spray coverage.

Dishes not getting clean? A damaged or clogged spray arm prevents proper water distribution. This rotating arm restores even spray coverage and performance.

The Cover is an OEM part for Bosch dishwashers. It provides a protective barrier that shields internal components from damage and extends the life of the appliance.

The cover is exposed to heat, humidity, and debris during each wash cycle. Over time and repeated use, these conditions can cause cracks, warping or breakdown of the protective plastic material.

Causes of a bad cover include normal wear and tear, accidental dents or punctures, and exposure to excess heat or chemicals.

Symptoms of a cover needing replacement include:

• Visible cracks or holes that compromise the barrier
• Loose or sagging fit that allows internals to be exposed
• Warping or melting of the protective plastic shield

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

The Spray Head is an OEM replacement part for Bosch dishwashers. It directs pressurized water along the dish racks, targeting every inch of dishware and cookware. Consistent coverage cleans thoroughly without waste.   

Symptoms of a bad spray head can include clogged nozzles, inconsistent patterns, or spray heads that do not oscillate and rotate properly through cycles. Mineral deposits pose blockage risks over time.

Causes of a bad spray head include:

• Uneven or skipped areas of spray coverage inside the machine
• Rotating/oscillating mechanisms that jam or continuously stick  
• Nozzles fully or partially blocked reducing water pressure
• Head assembly detaching from water tub wall or bracket

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

Traps small food particles and debris in your dishwasher to prevent clogs. Replace if damaged, torn, or when cleaning performance declines. Confirm fit with your model number.

Captures debris before it enters the pump system. Replace when clogged, calcified, or damaged to prevent E22 errors and ensure clean dishes. Verify fit.

The Lower Dishrack is an OEM part for Bosch dishwashers. It provides the necessary rack space for washing dishes beneath the upper rack level.

As Bosch's signature FlexSpace design, it folds up for easy loading but must withstand heavy loads regularly. Causes of damage can include impact or misalignment bending the rack over time.

Symptoms of a problematic lower dishrack include:

• Difficulty folding/unfolding the bottom rack
• Loose fitment allowing rattling during the cycle
• Reduced rack space for full loads
• Cracks or breaks compromising integrity

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

The Lower Dishrack is an OEM part for Bosch dishwashers. It provides the necessary rack space for washing dishes beneath the upper rack level.

As Bosch's signature FlexSpace design, it folds up for easy loading but must withstand heavy loads regularly. Causes of damage can include impact or misalignment bending the rack over time.

Symptoms of a problematic lower dishrack include:

• Difficulty folding/unfolding the bottom rack
• Loose fitment allowing rattling during the cycle
• Reduced rack space for full loads
• Cracks or breaks compromising integrity

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

Replacement wheel for dishwasher lower rack. Snaps into place to restore smooth rolling when wheels are broken, cracked, missing, or worn out.

Replace your dishwasher's cracked, loose, or broken door handle. Restores secure grip and smooth door operation. Direct fit for compatible models.

This genuine replacement bearing supports the washer drum for smooth, stable rotation and helps reduce noise and vibration caused by worn or damaged bearings. Restores proper drum alignment for quieter operation. What it does:

• Supports the inner drum so it spins smoothly and stays aligned
• Reduces grinding, rumbling, squeaking or knocking noises from the drum
• Helps prevent excessive drum wobble that can damage seals or the tub
• Used when worn bearings cause rough rotation, metal-on-metal noise, or visible drum play

• Disconnect power (and water if applicable) before starting any repair
• Replacing this bearing typically requires partial disassembly of the washer/drum assembly and specialty tools
• Inspect shaft/hub, seals, and surrounding components for wear and replace if damaged

Dishwasher rack insert secures components within the dish rack assembly. Replace if cracked, broken, or missing to restore proper alignment and fit.

Dissolves limescale, mineral deposits, and odor-causing residues from dishwasher tub and spray system. Use monthly to maintain peak cleaning performance.

Fits inside the utensil basket to separate and support flatware for proper spray coverage. Replace if cracked, broken, or missing to restore normal loading.

Factory bearing that supports rotating components in your dishwasher. Replace when you hear grinding noise or feel resistance. Verify fit by model number.

Upper basket cup rack for dishwashers. Holds cups, mugs, and stemware securely in place. Replace if cracked, broken, or missing to restore protection.

Replacement crockery basket for your dishwasher. Holds plates, cups, and saucers at adjustable levels. Replaces cracked, broken, or damaged baskets.

Replacement crockery basket for your dishwasher. Holds plates, cups, and saucers at adjustable levels. Replaces cracked, broken, or damaged baskets.

The Bearing is an OEM component specifically designed for select Bosch dishwashers requiring stabilized rotational movement. As a friction-reducing fixture, it facilitates the smooth operation of assorted mechanisms.  

Precision-ground steel and reinforced polymer composite withstand harsh chemicals and high spinning velocities without excess heat or noise. Independent shielding maintains lubrication without contaminating surrounding compartments.

Causes requiring bearing replacement usually involve coolant deterioration building friction. Physical impacts may dislodge protective seals exposing components to intrusions no longer offering intended cushioning.

Symptoms signaling the need for a new bearing incorporate:

• Grinding or scraping noises emitting from moving joints
• Reduced cycle speeds from binding components  
• Excessive rotational resistance detected by diagnostics sensors

This OEM Bosch replacement bearing is also compatible with Thermador, Gaggenau, and some Kenmore dishwashers relying on long-lasting suspension elements. Proper installation restores noise-dampening characteristics throughout operational stresses.

Replacement trim insert for dishwasher racks. Secures panels and tines, closes gaps for proper alignment. Needed when original is cracked, broken, or missing.

Replacement cup rack for dishwasher upper rack. Secures cups, mugs, and small glassware upright during wash cycles. Replaces broken or missing holders.

Replacement cutlery drawer for dishwashers. Installs at the top rack to organize silverware and utensils. Replaces cracked, broken, or missing trays.

Cutlery basket frame for Bosch dishwashers. Organizes and supports forks, knives, and spoons. Replace if cracked, broken, or damaged from wear.

Replace worn cutlery drawer roller assembly when drawer sticks or doesn't glide smoothly. Restores easy utensil access. Verify fit with your model number.

The Clip is an OEM part for Bosch dishwashers. This part secures and stabilizes items within the dishwasher, such as racks, hoses, or panels. This part prevents movement that can lead to wear, noise, or even damage during cycles, the Clip is essential for maintaining the dishwasher's integrity and performance over time.

Causes of a bad Dishwasher Clip can range from natural wear and tear, which can weaken or break the clip, to accidental damage during cleaning or maintenance. 

Symptoms of a bad Dishwasher Clip include:

• Dishwasher components becoming loose or detached
• Increased noise or vibration during operation, indicating parts are not securely held
• Difficulty in loading or unloading dishes if racks or similar parts are not properly secured

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

Dissolves limescale, mineral deposits, and odor-causing residues from dishwasher tub and spray system. Use monthly to maintain peak cleaning performance.