Parts for Electrolux EDW7505HPS0A: 13 - Racks Parts

Dissolves limescale, mineral deposits, and odor-causing residues from dishwasher tub and spray system. Use monthly to maintain peak cleaning performance.

This lower dishrack is the dishwasher's main bottom rack that holds plates, bowls and cookware securely during cycles and restores proper loading after damage or wear. It replaces a cracked, sagging or rusted lower rack to help dishes sit upright for effective cleaning. What it does:

• Provides stable support for plates, bowls and larger items in the dishwasher lower compartment
• Keeps dishes properly spaced so water and detergent can reach surfaces
• Replaces cracked, bent or rusted lower racks that cause dishes to tip or sit unevenly
• Restores rack travel if original rollers or guides are damaged
• Helps prevent items from blocking spray arms when the rack is correctly positioned

• Remove the old lower rack by pulling it forward and lifting off track; slide the new rack into the lower rails until it seats
• Inspect and replace any worn rollers or end caps for smooth operation
• Check that the rack sits level and does not obstruct spray arm rotation before running a cycle
• For safety, turn off power and water to the appliance if you need to service components beyond the rack

Secures interior panels, trim, and rack components in your dishwasher. Replace when worn or broken to restore proper alignment and stability. Confirm fit with your model number.

Color: light gray. Measures about 3 inches high by 6 inches deep.

The Roller Assembly is an OEM part for Frigidaire dishwashers. It includes the necessary rollers that allow the dishwasher rack to smoothly glide in and out of the appliance. Proper functioning of these rollers is essential for easy loading and unloading of dishes.

Over time, rollers can wear out or become damaged due to regular use or accumulation of debris. Causes of a bad roller assembly include wear from frequent use, damage from overloading the dishwasher rack, or debris buildup causing obstruction.

Symptoms of a bad roller assembly include:

• Difficulty in moving the dishwasher rack
• The rack not sliding smoothly or coming off the track
• Unusual noises when moving the rack
• The rack tilting or not sitting properly in the dishwasher

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

A small mounting bracket that secures internal appliance components to the cabinet or chassis, restoring proper fit and reducing movement. Simple, direct replacement for worn or damaged support hardware. What it does:

• Secures internal panels or components to the appliance chassis to maintain alignment
• Prevents rattling, vibration, and excess movement from loose supports
• Helps restore proper fit and function after bent or broken brackets
• Works where a small, rigid mount point is required for component stability

• One mounting bracket

• Disconnect power and unplug the appliance before beginning any repair
• Use basic hand tools; support panels while loosening fasteners to avoid drops
• Inspect surrounding fasteners and mounting points for damage and replace as needed

This small plastic or metal clip secures components within your dishwasher, such as spray arms, filters, or rack assemblies. It holds parts in their proper position during dishwasher operation and prevents them from shifting or falling out. Replace it if dishwasher parts seem loose, if you find components have fallen to the bottom of the tub, or if existing clips are broken or missing.

Replacement silverware basket for your dishwasher. Installs in the lower rack to hold utensils during wash cycles. Order a new basket if yours is cracked, broken, or missing.

Secures dishwasher dishrack components in place. Replace this clip if it's broken, cracked, or missing to restore proper rack stability and alignment.

Replacement bracket that secures the fold-down fence to your dishwasher's upper or lower rack. Needed when original is broken, rusted, or missing.

Replacement lid for your dishwasher's silverware basket. Covers and secures utensils during wash cycles. Needed when original is cracked or missing.

Replacement lid for your dishwasher's silverware basket. Snaps onto the top of the utensil basket. Needed when the original lid is cracked, broken, or missing.

Replacement lid for dishwasher silverware basket. Covers the utensil compartment during wash cycles. Needed when original lid is cracked, broken, or missing.

Dissolves limescale, mineral deposits, and odor-causing residues from dishwasher tub and spray system. Use monthly to maintain peak cleaning performance.

Replace your dishwasher's silverware basket lid if it's cracked, broken, or missing. This lid covers the utensil basket compartment to keep items secure.

This replacement washer lid restores the washer's top enclosure and helps keep laundry contained while the machine runs. It provides a secure top surface and replaces cracked, bent, or missing lids to improve safety and appearance. What it does:

• Covers and protects the washer inner tub during operation
• Helps prevent water splashes and keeps clothes contained
• Restores proper lid alignment for secure closing and latch engagement
• Replaces cracked, warped, or cosmetically damaged lids

• Disconnect power to the appliance before beginning any work
• Installation typically requires removing the old lid and attaching the replacement to the existing hinge assembly
• Handle carefully to avoid scratching the finish or damaging the paint
• If mounting hardware or hinge components are damaged, inspect and replace them as needed

This plastic housing covers the height adjustment mechanism for the dishwasher's upper dish rack, located on the rack's side rails. Replace when the cover is cracked, missing, or prevents smooth rack height adjustment.

Dishwasher clamp secures hoses and components in place. Replace if cracked, broken, or causing leaks. Verify fit with your model number.

Tension spring that holds dishwasher doors, latches, or levers in place. Replace if your original spring is worn, broken, or missing.

Replacement mounting screw for dishwasher panels, brackets, and trim. Secures loose components and restores proper fit when original is stripped or missing.

Secures dishwasher rack tines in place. Replaces broken, missing, or worn clips that no longer hold tines properly. Easy snap-in installation.

Replacement mounting screw for dishwasher installation and assembly. Secures components and panels. Order a new screw if yours is stripped, missing, or damaged.

This float assembly helps detect and control water level inside the appliance to prevent overfilling and enable normal drain cycles. It replaces a worn or stuck float to restore reliable water sensing and operation. What it does:

• Rises with water level to trigger the appliance's water-level detection system
• Helps stop overfilling and reduces risk of leaks or continuous fill
• Commonly related to symptoms like persistent fill, frequent draining, or error codes tied to water level
• Works as the mechanical sensing element in the water management system

• One float assembly

• Disconnect power and water supply before starting any repair
• Verify correct alignment and free movement of the float after installation
• Reassemble panels and run a short test cycle to confirm proper operation

This is a rubber or flexible seal that fits along the dishwasher door to prevent water from leaking out during wash cycles. It acts as a baffle to direct water back into the tub and maintain a watertight closure. Replace this part if you notice water pooling on the floor beneath the dishwasher door or see visible cracks, tears, or deformation in the existing seal.

Replace your dishwasher door seal kit to stop leaks and improve wash performance. Signs include water pooling or dampness around the door. Verify fit with your model number before ordering.

Replace your dishwasher's internal wire harness if the wiring is frayed, damaged, or corroded. Connects electrical components to the control board.

This is a right-side tub corner baffle that seals the interior corner of the dishwasher tub where the door meets the tub walls. It prevents water from leaking out through gaps at the tub corners during the wash cycle. Replace this baffle if you notice water leaking from the sides of the door or pooling underneath the dishwasher.

Dissolves limescale, mineral deposits, and odor-causing residues from dishwasher tub and spray system. Use monthly to maintain peak cleaning performance.