Parts for Broan QS236BC: Range Hood Parts

This factory replacement plate provides a rigid, stable mounting surface inside your unit. Replacing a bent or damaged plate helps keep internal components securely positioned and operating smoothly.

• Supports and locates attached components for correct fit and function
• Helps maintain alignment to reduce rubbing, vibration, or rattling noises
• Restores secure mounting when the original plate is bent, cracked, or missing
• Direct-fit replacement built to match the original footprint

• Disconnect power at the breaker before servicing
• Wear cut-resistant gloves; metal edges can be sharp
• Support attached parts and transfer any brackets or hardware from the old plate
• Tighten fasteners evenly before restoring power

A small replacement mounting screw used to secure range hood and ventilation components. Restores loose or missing fasteners so panels and assemblies sit firmly and stop rattling or shifting during use. What it does

• Secures trim, grille, brackets or other small assemblies to the main housing
• Replaces a missing or stripped screw that causes rattling or loose parts
• Helps restore proper alignment of removable panels and covers
• Works as a direct fastener when the original screw is lost or damaged

• Turn power off to the appliance before working on vents or housings
• Use the matching screw hole and do not force a different-size fastener
• Tighten until snug; avoid over-tightening which can strip threads or crack plastic
• If threads are damaged, replace the mating clip or insert before using this screw

This motor run capacitor provides the stable electrical charge needed for blower and fan motors to start and run smoothly, helping restore proper airflow and quiet operation in ventilation and range hood systems. What it does:

• Supplies the phase-shifting charge that helps fan/blower motors start and maintain speed
• Commonly replaced when motors fail to start, run intermittently, or run weakly
• Can stop humming or buzzing caused by a failing motor start circuit
• Restores consistent airflow and prevents motor overheating caused by repeated start attempts

• Disconnect power to the appliance at the breaker before servicing
• Verify capacitor is discharged before touching terminals to avoid shock
• Use the exact OEM capacitor specification shown for your model when ordering

This isolation transformer supplies the low-voltage control circuit that powers switches, relays and controls in the ventilation unit—restoring proper control operation and stable low-voltage output. What it does:

• Converts and isolates the appliance control circuit from main power to protect controls and reduce electrical noise
• Restores low-voltage power to switches, relays and electronic controls that fail when the transformer is bad
• Prevents intermittent or no-response symptoms from control panels and blower/light circuits
• Provides a direct replacement for the original transformer to maintain proper control operation

• Disconnect all power to the appliance before starting any work
• Verify wiring locations and terminal markings; match connections exactly to the original transformer
• Inspect mounting and harness routing; secure transformer to prevent vibration

This is a genuine replacement mounting screw used to secure components on compatible Broan appliances, restoring proper fit and stopping loose or rattling parts. Simple fastener for reattaching panels, brackets, or covers. What it does

• Secures panels, brackets, or covers to prevent movement and vibration
• Helps stop rattling or buzzing caused by a loose fastener
• Restores a firm connection after a stripped or missing screw
• Used wherever the original mounting screw has corroded or been lost

• Use the matching screwdriver or driver bit to avoid stripping the head
• Tighten until snug; do not over-torque to prevent damage to threaded holes
• Disconnect power to the appliance and remove any panels if needed before servicing
• Inspect mating hardware and replace as necessary

This replacement cover restores the exterior appearance and protective finish of your vent hood. It hides internal components and helps direct airflow while keeping the range hood looking finished and functioning properly. What it does:

• Replaces a damaged, dented, or corroded outer cover to restore appearance
• Protects internal blower and controls from grease, dust, and heat exposure
• Helps maintain proper airflow direction and vent hood performance
• Commonly used when the original panel is cracked, bent, or missing fasteners

• One replacement cover panel

• Installation requires removing the old cover; retain or replace mounting screws as needed
• Use basic hand tools; support the cover during removal to avoid scratching adjacent surfaces
• Disconnect power to the appliance before working near electrical components

This is a replacement control board that has been manufactured by Broan.The control board is a critical part, as it controls the dishwasher functions such as the washing, draining, and drying cycles. This part is subject to wear and tear over time which could render it faulty and prevent the dishwasher from effectively washing dishes. Make sure the dishwasher is disconnected from both power and water before attempting any repairs. Wear work gloves to help prevent serious injury.This genuine OEM part is compatible with dishwashers. As an authentic part, this control board is intended for use with different brands of dishwashers manufactured by Broan, Kenmore, Kenmore Elite, and other compatible brands. This part is sold individually and is a genuine part made of high-quality, durable, non-corrosive materials.

This is a replacement mounting screw used to secure components on compatible Broan range hoods and ventilation assemblies. It provides a secure, corrosion-resistant fastening to restore proper part alignment and stability. What it does:

• Fastens panels, brackets, or small components to keep assemblies stable and aligned
• Restores loose or rattling parts that may vibrate during operation
• Helps maintain safe, secure connections for venting and electrical component support
• Small, OEM-matched fastener to fit the original screw hole and thread pattern

• Use appropriate screwdriver or driver bit to avoid stripping the head
• Tighten securely but do not overtighten to prevent thread or component damage
• Disconnect power to the appliance and ensure the unit is cool before servicing
• Inspect surrounding hardware for replacement

This blower motor powers the fan assembly to move air through the ventilation system, restoring airflow and ventilation performance. Ideal when the fan is weak, intermittent, or not running. What it does

• Spins the fan/blower to exhaust air from range hoods or ventilation fans.
• Replaces a failed motor that hums, won't start, or runs intermittently.
• Restores normal airflow and reduces overheating from stalled fans.
• Helps eliminate unusual noises like grinding or squealing when motor bearings fail.

• One replacement blower motor

• Disconnect power at the breaker before starting any repair.
• Basic hand tools may be needed; mounting hardware or harnesses may be reused if in good condition.
• Follow the appliance's service manual for wiring and mounting instructions.
• If you smell burning or see damaged wiring, stop.

The Light Socket is an OEM replacement part for Broan range hoods. This electrical fitting provides a power connection point for light fixtures above stovetops. A faulty socket jeopardizes safe operation.

Causes of a bad socket can include loose wire connections allowing arcing or shorts, moisture intrusion corroding terminals, or cracking of plastic insulation. 

Symptoms of a bad light socket include: 

• Intermittent or non-functioning lights  
• Warm socket housing or abnormal smells/sounds
• Tripped breakers or blown fuses servicing the range hood

This OEM component fits additional brands like Thermador, Viking, and some Kenmore range hood models using equivalent Broan designs.

Secures the grease filter in your Allure range hood. This filter spring kit replaces worn or missing springs so the filter stays seated, reducing rattling and preventing the filter from dropping during operation.

• Applies spring tension to hold the grease filter in place
• Helps maintain proper airflow by keeping the filter fully seated
• Reduces vibration and noise from a loose filter
• Common symptoms: filter falls out, hangs loosely, or is hard to keep latched

• Disconnect power at the breaker before servicing the hood
• Remove the grease filter(s) to access the spring location
• Wear cut-resistant gloves; sheet metal edges can be sharp
• Ensure springs are fully seated in the factory slots/tabs, then test-fit the filter