Parts for Ge JVW5301BJ1TS: Range Hood Parts

Keep refrigerator air fresh and reduce common food odors with this charcoal replacement filter. Fits inline filter housings to help trap odor-causing particles and maintain a neutral-smelling fresh food compartment. What it does:

• Adsorbs and reduces cooking and food odors that can circulate inside the refrigerator
• Helps improve overall air freshness in fresh-food compartments and door bins
• Supports existing filtration systems by capturing odor-causing particles
• Useful when persistent or recurring smells are noticeable despite cleaning

• One charcoal refrigerator air filter

• Follow the refrigerator owner's manual for proper filter housing location and replacement steps
• Turn off or disconnect power to the appliance before accessing the filter area
• Inspect the filter housing for damage or residue and replace the filter in the correct orientation
• Dispose of the old filter following local regulations; do not attempt to clean and reuse

The Range Hood Light Bulb is an OEM part for GE range hoods. As a key component, it lights up the cooking surface below the hood to aid visibility while cooking. Proper lighting allows for safer food preparation by improving visibility of ingredients, pans and appliances under the hood.

Causes can be due to normal burnout over time, defects, or accidental damage. Replace yours today with this authentic GE bulb to restore optimal lighting beneath the hood. Improved visibility helps prevent accidents and ensures a pleasant cooking experience. 

Symptoms of a bad light bulb include:

• Dim or no light emitted from the range hood fixture
• Inability to clearly see the cooktop or what's happening below the hood during cooking
• Premature darkness under the range hood area

This GE replacement part is compatible with Hotpoint, RCA, and some Kenmore models.

The Grease Filter is an OEM component for GE range hoods. Located inside the metal mesh collection area, this disposable filter absorbs grease, smoke, and cooking vapors to keep kitchen air clean. 

Symptoms of a bad grease filter include: 

• Clogged mesh preventing effective smoke/odor removal
• Grease and residue buildup reducing airflow 
• Prematurely worn/saturated filter failing to trap contaminates

Causes stem from regular saturation over time near the cooking surfaces. Precision mesh capture is key to ventilation.

Replace now with this OEM GE filter to restore the powered exhaust. Compatible replacements for Hotpoint and RCA range hoods as well.  

This lower duct cover replaces the trim piece at the base of the appliance to restore a finished appearance and keep the ducting protected from debris. It matches black stainless finishes for a cohesive look. What it does:

• Covers and protects the lower air/exhaust duct opening to prevent debris and objects from entering
• Helps direct airflow where intended and keeps internal components concealed
• Restores the appliance's finished front appearance when the original cover is damaged or missing
• Can reduce rattling caused by a loose or broken lower trim piece

• One lower duct cover (black stainless)

• Disconnect power to the appliance before attempting any repair
• Removal/installation typically requires removing the access panel or lower kickplate and fastening with existing screws or clips
• Handle edges carefully to avoid scratching the finish; use a soft cloth or gloves during install
• Only replace parts shown to be damaged or missing; your model diagram for exact location and fit

This upper duct cover replaces the damaged or worn cover above the microwave/hood duct to restore a finished appearance and protect internal components from grease and debris. It's finished in black stainless to match compatible appliance trims. What it does:

• Covers and protects the upper duct opening behind the microwave/hood assembly
• Prevents grease, dust and debris from entering internal duct and cabinet spaces
• Restores the exterior trim for a clean, factory appearance
• Helps reduce visible gaps or light leakage around the duct area

• Designed for factory-style replacement; follow your appliance's service manual for disassembly and reassembly
• Turn off power to the appliance before starting work to avoid electrical hazards
• Use appropriate screws and gaskets removed from the original assembly; only reuse OEM fasteners if in good condition

This damper assembly controls the oven vent airflow to help maintain proper cooking temperatures and vent steam. It replaces a worn or stuck vent flap so the oven can vent normally and retain heat as designed. What it does:

• Opens and closes the oven vent to regulate exhaust airflow during heating and cooling
• Prevents continuous heat loss when closed and allows steam/smoke to escape when open
• Common symptom: oven struggles to reach or hold set temperatures
• Common symptom: excessive heat or steam escaping from the front of the oven
• Common symptom: vent flap stuck open or not moving

• One damper assembly

• Disconnect power (and gas if applicable) before starting any repair
• Access typically requires removing the oven back panel or control panel—keep fasteners organized
• Verify damper orientation and smooth movement before reassembling

This console control assembly replaces the oven's primary control and button interface to restore user input and electronic control of cooking functions. It provides the main touch/press buttons and control board needed for operation. What it does:

• Processes user button presses and sends commands to the oven's systems
• Manages bake/ broil/ timer functions and overall oven control logic
• Replaces a failing console that causes unresponsive or intermittent buttons
• Can resolve symptoms such as unresponsive controls, no display feedback, or oven not starting when commands are entered

• Disconnect power at the household breaker before starting any repair
• Take pictures of wire locations or label wires before removal to ensure correct reassembly
• Handle circuit board with care to avoid static discharge or damage to connectors

This is a range hood blower assembly that removes cooking grease and odors from the air. If the air is not being cleaned effectively, the blower assembly will need to be replaced. Check to make sure that the filter itself is not clogged due to cooking grease. If it is, it should be cleaned. If the blower is not running at all, run diagnostics to ensure it's the blower assembly itself that has gone bad and not another part. Unplug the unit from its electrical outlet or shut off the house circuit breaker prior to replacing this part. The replacement process is very easy and takes about 15 to 30 minutes from start to finish. A nut driver will be needed for this task.This part is a genuine OEM part that comes straight from the manufacturer. It is sold individually. The blower assembly is compatible with range hoods that are manufactured by GE.

This handheld remote control replaces a factory remote to restore convenient remote operation of compatible GE appliances. It provides button-based command input so you can select functions from a distance without using the appliance controls directly. What it does

• Sends wireless commands to the appliance to start cycles, change settings, or stop operation when the original remote is lost or not working
• Common symptom: no response or intermittent response from the remote
• Common symptom: unresponsive or stuck buttons on the original remote
• Works as a direct replacement when the original remote is identified as the faulty component

• Install batteries before use; remove battery insulation tab if present
• Follow the appliance owner's manual for any required pairing or setup steps
• Disconnect appliance power before opening control compartments or doing electrical work
• Dispose of old electronics and batteries according to local regulations