Parts for Ge JVW5361SJ1SS: Range Hood Parts

Keep refrigerator air fresh and reduce common food odors with this charcoal replacement filter. Fits inline filter housings to help trap odor-causing particles and maintain a neutral-smelling fresh food compartment. What it does:

• Adsorbs and reduces cooking and food odors that can circulate inside the refrigerator
• Helps improve overall air freshness in fresh-food compartments and door bins
• Supports existing filtration systems by capturing odor-causing particles
• Useful when persistent or recurring smells are noticeable despite cleaning

• One charcoal refrigerator air filter

• Follow the refrigerator owner's manual for proper filter housing location and replacement steps
• Turn off or disconnect power to the appliance before accessing the filter area
• Inspect the filter housing for damage or residue and replace the filter in the correct orientation
• Dispose of the old filter following local regulations; do not attempt to clean and reuse

The Range Hood Light Bulb is an OEM part for GE range hoods. As a key component, it lights up the cooking surface below the hood to aid visibility while cooking. Proper lighting allows for safer food preparation by improving visibility of ingredients, pans and appliances under the hood.

Causes can be due to normal burnout over time, defects, or accidental damage. Replace yours today with this authentic GE bulb to restore optimal lighting beneath the hood. Improved visibility helps prevent accidents and ensures a pleasant cooking experience. 

Symptoms of a bad light bulb include:

• Dim or no light emitted from the range hood fixture
• Inability to clearly see the cooktop or what's happening below the hood during cooking
• Premature darkness under the range hood area

This GE replacement part is compatible with Hotpoint, RCA, and some Kenmore models.

Note: This is a quantity of ONE filter.

The Grease Filter is an OEM replacement part for GE range hoods. It plays a role in safely containing grease, smoke, and cooking vapors before they are exhausted outside. Proper filtration is important for maintaining healthy indoor air quality.

Causes of failure generally stem from standard wear and repeated hand washing. Burnt residue accumulation from heavy cooking is also a common issue over extended use.

Symptoms of a bad grease filter include:

• Reduced suction power and airflow through the range hood  
• Dimmed or flickering hood lighting due to grease coating
• Greasy residue buildup around interior hood components  
• Strong cooking odors lingering in the kitchen instead of venting

This OEM GE replacement is compatible also with some Hotpoint, RCA, and Kenmore range hoods.

This lower chimney trim piece finishes the front of the vent stack, restoring the range hood/microwave's finished appearance and protecting internal components from grease and debris. Fits where the lower section of the chimney is missing, dented, or corroded. What it does:

• Covers and protects the lower portion of the vent/chimney assembly to keep grease and dust out of internal parts
• Restores a clean, factory appearance to the front of the vent or over-the-range microwave
• Replaces dented, bent, or damaged lower trim that can interfere with alignment or airflow
• Useful when chimney gap or cosmetic damage exposes internal ducting or fasteners

• One lower chimney trim

• Disconnect power to the appliance (unplug or shut off breaker) before starting work
• Basic hand tools typically required; remove any grille or upper trim to access mounting fasteners
• Align and secure with the original screws or clips; do not overtighten to avoid cracking the trim

This upper chimney chimney panel covers the top portion of the range hood assembly to restore appearance and protect internal ducting. It's a direct-fit replacement that re-establishes the proper finished look for the vent area. What it does:

• Replaces a dented, scratched or missing upper chimney panel to regain the finished exterior
• Covers and protects the hood's internal ductwork and mounting hardware
• Helps the chimney sections align and sit flush for a clean fit
• Common symptom: visible damage, gaps, or a loose/unstable top panel

• One upper chimney panel

• Disconnect power to the appliance before starting any work
• Handle carefully — edges may be sharp; wear gloves and eye protection
• May require two people to hold and align the panel during installation

This damper assembly controls the oven vent airflow to help maintain proper cooking temperatures and vent steam. It replaces a worn or stuck vent flap so the oven can vent normally and retain heat as designed. What it does:

• Opens and closes the oven vent to regulate exhaust airflow during heating and cooling
• Prevents continuous heat loss when closed and allows steam/smoke to escape when open
• Common symptom: oven struggles to reach or hold set temperatures
• Common symptom: excessive heat or steam escaping from the front of the oven
• Common symptom: vent flap stuck open or not moving

• One damper assembly

• Disconnect power (and gas if applicable) before starting any repair
• Access typically requires removing the oven back panel or control panel—keep fasteners organized
• Verify damper orientation and smooth movement before reassembling

This console control assembly replaces the oven's primary control and button interface to restore user input and electronic control of cooking functions. It provides the main touch/press buttons and control board needed for operation. What it does:

• Processes user button presses and sends commands to the oven's systems
• Manages bake/ broil/ timer functions and overall oven control logic
• Replaces a failing console that causes unresponsive or intermittent buttons
• Can resolve symptoms such as unresponsive controls, no display feedback, or oven not starting when commands are entered

• Disconnect power at the household breaker before starting any repair
• Take pictures of wire locations or label wires before removal to ensure correct reassembly
• Handle circuit board with care to avoid static discharge or damage to connectors

This is a range hood blower assembly that removes cooking grease and odors from the air. If the air is not being cleaned effectively, the blower assembly will need to be replaced. Check to make sure that the filter itself is not clogged due to cooking grease. If it is, it should be cleaned. If the blower is not running at all, run diagnostics to ensure it's the blower assembly itself that has gone bad and not another part. Unplug the unit from its electrical outlet or shut off the house circuit breaker prior to replacing this part. The replacement process is very easy and takes about 15 to 30 minutes from start to finish. A nut driver will be needed for this task.This part is a genuine OEM part that comes straight from the manufacturer. It is sold individually. The blower assembly is compatible with range hoods that are manufactured by GE.

This handheld remote control replaces a factory remote to restore convenient remote operation of compatible GE appliances. It provides button-based command input so you can select functions from a distance without using the appliance controls directly. What it does

• Sends wireless commands to the appliance to start cycles, change settings, or stop operation when the original remote is lost or not working
• Common symptom: no response or intermittent response from the remote
• Common symptom: unresponsive or stuck buttons on the original remote
• Works as a direct replacement when the original remote is identified as the faulty component

• Install batteries before use; remove battery insulation tab if present
• Follow the appliance owner's manual for any required pairing or setup steps
• Disconnect appliance power before opening control compartments or doing electrical work
• Dispose of old electronics and batteries according to local regulations

The Installation Hardware Kit is an OEM part for GE wall-mounted range hoods. 

Symptoms of missing or damaged installation hardware include:

• An unstable or wobbly range hood 
• Inability to correctly secure the hood to the wall mounting brackets
• Possible falling or detaching of the hood from the wall
• Incomplete or improper ventilation performance

Causes of a bad installation hardware kit include losing individual pieces over time, damage occurring during previous installation attempts, or hardware becoming wear and tear over extended use. 

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.