Parts for Whirlpool WRF736SDAB10: 03 - Refrigerator Liner Parts

Fix refrigerator water or ice dispenser issues with this dispenser housing. Solves leaking, cracking, or broken housing problems. Moderate DIY repair.

Fix leaking water lines or no water flow to your dispenser or ice maker. This water tube routes water from the inlet valve to the filter manifold.

The Reservoir is an OEM part for Whirlpool refrigerators. It is designed to store and dispense water within the refrigerator, typically connecting to the water dispenser and ice maker. This reservoir ensures a consistent supply of water, facilitating the production of ice and providing chilled water for consumption.

Causes of a bad reservoir can include mineral buildup from hard water, cracks or leaks due to wear and tear, or contamination from foreign particles.

Symptoms of a bad reservoir include:

• Water leaks inside the refrigerator
• Reduced or no water flow to the dispenser or ice maker
• Odd tastes or odors in the water
• Ice production issues

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Fix no ice or water dispenser issues with this refrigerator water inlet valve. Controls water flow to ice maker and dispenser. Moderate DIY repair.

Holds the water filter and routes water to the dispenser and ice maker. Replace if cracked, leaking, or won't engage the filter. Confirm fit by model.

Access panel cover that shields internal components and restores a clean finish. Replace if cracked, broken, or missing to protect wiring and parts.

Flip-down door won't stay closed or open smoothly? This push latch secures compartment doors with a spring-action catch. Simple DIY fix in minutes.

Replacement door filter access cover for your refrigerator. Secures and protects the water filter compartment. Replace if cracked or missing. Verify fit.

Fix ice maker not filling or freezing issues with this fill tube heater. Prevents ice blockages in the water inlet so your ice maker works reliably.

Replacement fastening screw for securing trim, panels, and brackets inside appliances. Use when original screw is missing, stripped, or damaged.

Refrigerator cover panel that conceals internal components. Replace if cracked, broken, discolored, or missing to restore the clean appearance of your unit.

Ice container box for bottom-mount refrigerators. Stores and dispenses ice cubes in the freezer compartment. Replace if cracked, broken, or missing.

This is the main electronic control board for a refrigerator, responsible for regulating compressor operation, defrost cycles, fan motors, and temperature settings. It receives input from thermistors and user controls to maintain proper cooling in both the fresh food and freezer compartments. Replace this board if the refrigerator is not cooling, displays error codes, has erratic temperature swings, or if components like fans and the compressor fail to turn on despite receiving power.

Fix warm fridge temps or excessive frost with a new evaporator fan motor. Restores proper airflow across coils for consistent cooling. DIY-friendly.

Seals the fan housing to direct airflow and maintain proper cooling. Replace if worn or damaged to reduce air bypass and improve temperature consistency.

Fix refrigerator not cooling, temperature fluctuations, or display errors with this control module. Moderate DIY repair for bottom-mount models.

A replacement icebox rear gasket that seals the freezer compartment to help keep cold air in and reduce moisture intrusion. Restores the door seal to help maintain proper temperature and reduce frost buildup. What it does

• Seals the icebox/freezer door edge to maintain cold compartment temperature.
• Helps prevent warm air and moisture from entering, reducing frost and ice buildup.
• Can improve cooling consistency and help reduce excessive run time caused by a poor seal.
• Common symptom fix: visible gaps, torn or deformed seal, or recurring frost around the door.

• One icebox rear gasket.

• Disconnect power to the appliance before replacing the gasket.
• Remove the old gasket, clean the door/frame sealing surface, and align the new gasket evenly.
• Press the gasket into the channel firmly; some models may require gentle warming or minor adjustment for a snug fit.

The Heater is an OEM part for Whirlpool refrigerators. It is a thin heating element located behind the cover for the ice compartment inside the fresh food section that functions to prevent condensation from accumulating.

Causes of a bad heater can include failure of the heating element over many cycles of use, cracks or breaks due to normal wear and tear or repeated door opening/closing stress.

Symptoms of a bad heater include:

• Foggy or clouded refrigerator door panels
• Visible condensation building up inside refrigerator doors
• Potential for water droplets or leaks inside door panels

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

Refrigerator light won't turn off or on? The door switch detects when the door opens and closes. Easy 5-minute DIY repair with a pick tool or scraper.

Seals the freezer/icebox compartment to maintain proper temperature and reduce frost buildup. Replace if seal is torn, loose, or causing moisture intrusion.

Insulation foam panel for refrigerator. Installs inside cabinet walls to maintain temperature efficiency. Replace if cracked, compressed, or missing.

Refrigerator won't cool or too cold? A faulty damper control assembly stuck open or closed causes temperature issues. Moderate DIY repair restores airflow.

Replacement cover for your refrigerator. Installs to protect internal components or conceal mechanisms. Order if your original cover is cracked or missing.

Outer cabinet housing that provides structural support and protection for internal refrigerator components. Replace if cracked, damaged, or warped.