Need Help?
Call
Show parts
This OEM user manual provides operating instructions, safety information, maintenance guidance, and basic troubleshooting for the appliance. Keep it on hand for proper use and to help diagnose common issues. What it does:
Usually ships within 4 - 14 days
This part is discontinued by the manufacturer and is no longer available for purchase.
This is the installation instruction sheet and reference documentation for a refrigerator. It provides step-by-step guidance on proper setup, leveling, water line connections, and safety warnings. Replace this document if your original was lost or damaged and you need accurate installation details for your refrigerator.
Replacement owner's manual and care guide for your refrigerator. Includes operating instructions, maintenance tips, and troubleshooting info.
Assembly screw kit for refrigerators. Secures handles, shelf tracks, door hinges, and interior panels. Replace missing, stripped, or lost screws.
Size: 8-32 TT FL 1/2 S.
This is a end cap for the right side of the shelf.
This is a end cap for the left side of the shelf.
A replacement reversible plug door that covers and protects the appliance power inlet while letting the cord exit left or right for tidy cord routing. Restores a clean back panel appearance and helps keep the power connection protected from debris. What it does:
This trim shelf restores the finished front edge of a refrigerator door shelf, keeping stored items secure and improving the cabinet appearance. It replaces cracked or worn trim to help stabilize the shelf edge and reduce spills. What it does:
Left hand side. For right hand use WR17X2769. For center use WR17X2768
Right hand side. For left hand use WR17X2770. For center use WR17X2768
This twist-lock shelf support bracket secures refrigerator shelves in place by rotating into position. It replaces broken or worn support clips that cause shelves to sag or fall out. Use when your refrigerator shelves won't stay level or keep sliding out of position.
Size: 8-32 t. Includes 12 screws.
This I-bar door handle is a direct-fit replacement that restores a secure grip and original look to your refrigerator door. Durable design helps you open and close the door comfortably and reliably. What it does:
This rear wheel roller replaces a worn or damaged drawer/glide wheel to restore smooth movement and reduce sticking or noise. Durable molded construction fits the rear guide position to help support and steady the sliding drawer or bin. What it does
Removable plastic bin that collects and stores ice from your ice maker. Replace if cracked, broken, or missing to restore proper ice storage.
Replace worn, missing, or damaged washers in your top-mount refrigerator. This 12-pack provides essential hardware for secure component installation.
Leveling nut for refrigerators. Threads onto adjustable front feet to stabilize and level your appliance. Replace if stripped, cracked, or missing.
Vinyl sleeve that fits over rods, tubes, or wires in your refrigerator. Replace if cracked, torn, or missing to protect contact points and reduce wear.
The Light Socket is an OEM part for GE refrigerators. It is responsible for holding the refrigerator's light bulb and ensuring it receives power to illuminate the interior when the door is opened.
You should replace the light socket if it becomes faulty. Causes of a bad light socket can include wear and tear from regular use, electrical issues such as short circuits or power surges, and corrosion from moisture exposure.
Symptoms of a bad light socket include:
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
2 wire insulator.
Replacement screw for refrigerators. Secures handles, panels, and internal components. Order if yours is missing, stripped, or lost during repairs.
Freezer not cooling evenly or warm spots in fridge? A cracked evaporator fan blade stops airflow across coils. Simple DIY fix restores proper cooling.
Freezer not cooling or making buzzing noise? The evaporator fan blade circulates cold air. Easy DIY fix in under 5 minutes—simply pull off and press on.
Fix ice buildup in your freezer with this defrost heater. Melts frost from evaporator coils to restore normal cooling and prevent blocked airflow.
Fix excessive frost buildup in your freezer with a new defrost thermostat. This sensor regulates defrost cycles to prevent ice on coils. DIY repair in 10-20 minutes.
Refrigerator not cooling but freezer works? Icing up and then warming? This defrost timer control starts timed defrost cycles. Moderate DIY repair.
8-18 CA HX 1/2 S
Panel mounting screw for refrigerators. Secures access panels, trim pieces, and internal brackets. Replace lost, stripped, or corroded fasteners.
Black mounting screw for refrigerator interior or exterior panels. Replace missing, stripped, or damaged screws to secure components properly.
Replacement mounting screw for securing panels, trim, and internal brackets. Needed when original fasteners are missing, stripped, or damaged.
Replacement mounting screw for refrigerators. Secures internal components and panels. Needed when original screws are stripped, missing, or damaged.
The Run Capacitor is an OEM part for GE refrigerators. It plays a crucial role in the refrigerator's cooling system by providing the necessary start and run voltage to the compressor. Without a properly functioning run capacitor, your refrigerator may struggle to maintain the desired temperature, leading to spoiled food and inefficient energy use. Causes of a bad run capacitor include electrical surges, wear and tear over time, or overheating due to a malfunctioning refrigerator compressor or poor ventilation. Symptoms of a bad Run Capacitor include:
This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.
This part has been discontinued by the manufacturer and is no longer available.
Compressor clicks on and off or won't start? This PTC start relay energizes the compressor start winding to restore consistent cooling. DIY-friendly repair.
The R134 Drier is an OEM part for GE refrigerators. This component plays a critical role in the refrigeration system by removing moisture and contaminants from the refrigerant, ensuring efficient cooling and preventing damage to other parts of the system. It helps maintain the purity and effectiveness of the refrigerant as it cycles through the system.
You should replace the R134 drier if it becomes clogged or damaged. Common causes of a bad drier include wear and tear over time, exposure to moisture, or contamination from other failing components in the refrigeration system.
Symptoms of a bad R134 drier include:
Replacement mounting screw for securing panels, trim, and internal components in appliances. Needed when original screws are stripped, lost, or damaged.
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.