Parts for Whirlpool 7GSC22C6XA00: 03 - Refrigerator Shelf Parts

The FreshFlow Refrigerator Air Filter is an OEM component for Whirlpool and Maytag refrigerators. Located inside the ventilation system, this filter purifies circulated air. This air filter is 3" wide by 2" high and white in color. It should be replaced every 6 months to ensure the best performance.

Causes of failure relate to clogging from trapped dust, dander and other allergens despite regular replacement intervals. Performance decreases as filter media becomes saturated over months of use.  

Symptoms of a dirty or blocked refrigerator air filter include:

• Reduced airflow causes higher compressor runtime hours  
• Odors being pulled into the fridge from unfiltered vents  
• Shortening of food storage life due to unpurified air exposure
• Reduced fan speeds or strange noises originating from the vents

This genuine Whirlpool filter is also compatible with Maytag, Jenn-Air, and Amana models as well.

The Whirlpool EveryDrop Ice and Refrigerator Water Filter 1 is an OEM replacement part for Whirlpool refrigerators. This filter works to remove small particles from water to ensure clean, great-tasting ice and drinking water directly from the refrigerator door.  Measuring approximately 2.50 x 2.50 x 8.69 inches, this filter is easy to install. 

For optimal performance, we recommend replacing the filter every six months. The filter material is made from coconut carbon block, which has a micron rating of 0.5 and a flow rate of 0.5 gpm. The filter is designed to operate at a maximum pressure of 125 psi and an operating temperature of 38-100°.

Symptoms of a filter needing replacement include:

• Gradual decline in water/ice quality over time exhibiting muddy appearance or odd tastes
• Filter life indicator appears showing it is time for a new one 

Causes stem from normal usage over the stated capacity of the original filter. Allowing one to expire could produce unhealthy water.

This OEM replacement part is compatible with select Maytag, Jenn-Air, and Amana models as well.

This cover is the outer panel that protects internal components and restores the appliance's finished appearance. Replacing a damaged cover prevents debris and moisture from reaching electrical parts and stops visible gaps or rubbing. What it does:

• Shields internal components from lint, dust, and accidental contact
• Restores proper fit and alignment of adjoining panels and trim
• Helps reduce rattling or vibration caused by loose or warped panels
• Addresses visible damage such as cracks, dents, warping, or missing sections

• Disconnect power (and gas, if applicable) before starting any work
• Basic disassembly of surrounding panels and fasteners is typically required; have screwdrivers and pliers ready
• Wear gloves to protect against sharp sheet-metal edges
• Reuse or replace any damaged mounting clips or screws for a secure fit

The Drawer Roller is an OEM part for Whirlpool refrigerators, specifically designed to facilitate the smooth and effortless sliding of drawers within the appliance. This small but crucial component ensures that the refrigerator's drawers open and close with ease, allowing for convenient access to fruits, vegetables, meats, and other items stored inside. 

Causes of a bad Drawer Roller can stem from wear and tear over time, accumulation of debris or food particles in the roller mechanism, or damage from overloading the drawer beyond its capacity.  

Symptoms of a bad Drawer Roller include:

• Drawers sticking or jamming when you try to open or close them
• A grinding or squeaking noise during drawer movement
• The drawer sagging or not aligning properly within the refrigerator

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

This pan roller axle fits refrigerator drawers. It's the small support pin that anchors the roller so the crisper or pantry pan glides smoothly. Replacing a damaged axle restores proper glide and keeps the drawer tracking correctly.

• Secures the drawer's roller to the bin or rail so the pan slides smoothly
• Helps keep the crisper/pantry drawer level and properly aligned
• Common symptoms: drawer hard to open/close, sags on one side, scraping/clicking sounds
• Visible damage or a missing axle/roller at the drawer corner

• Unplug the refrigerator, remove contents, and take out the affected drawer
• Locate the broken axle and gently pry/pull it out
• Seat the new axle fully in the mounting hole; ensure the roller spins freely
• Reinstall the drawer and check for smooth operation

Replacement crisper pan that supports the refrigerator crisper drawer and helps contain spills and condensation for easier cleanup. Restores a stable base so drawers slide correctly and keeps the produce area tidy. What it does:

• Provides a flat, supportive surface for the crisper drawer and its contents.
• Catches leaks, drips and food spills to protect the refrigerator interior.
• Replaces cracked, warped or missing pans that can cause leaks or drawer misalignment.
• Helps make cleanup simple — remove, wipe, and reinstall.

• Disconnect power or unplug the refrigerator before servicing to reduce electrical and injury risk.
• Remove produce and slide out or remove the crisper drawer per your owner's manual.
• Lift out the old pan and set the replacement pan into the cavity, ensuring it seats flat and the drawer operates smoothly.
• Clean the area and the new pan with mild detergent; dry thoroughly before reinstalling.

This refrigerator meat pan is the slide-out deli drawer that stores and organizes meats and cheeses in the fresh food compartment. Replace a cracked or missing pan to restore smooth operation and a tidy, easy-access storage area.

• Provides a dedicated drawer for deli items in the fresh food section
• Slides on shelf tracks to keep items organized and accessible
• Restores use when the original pan is cracked, warped, or missing
• Common symptoms: broken tabs, pan falls off tracks, hard-to-slide or jammed drawer

• Remove food from the area; take off any shelf or cover above the pan if required
• Pull the old drawer straight out; inspect and clean the tracks
• Align the new pan with both tracks and slide it fully into place
• Handle plastic and any nearby glass carefully; do not force parts

This glass shelf assembly provides a stable, easy-to-clean surface for organizing refrigerator contents and restoring lost storage space. It replaces a cracked, chipped, or missing shelf to help keep items level and accessible. What it does:

• Replaces a damaged or missing refrigerator shelf so items sit securely
• Restores usable storage area and organization inside the fridge
• Prevents spills from spreading by providing a smooth, washable surface
• Helps maintain even placement of food and containers for proper cooling

• Remove food and any loose shelving or drawers before installing
• Wear cut-resistant gloves when handling broken or sharp glass
• Slide the shelf into the existing supports until it seats securely; do not force
• If shelf supports are damaged or missing, replace supports before use