Parts for Whirlpool GSS30C6EYF02: 03 - Refrigerator Shelf Parts

The Whirlpool EveryDrop Ice and Refrigerator Water Filter 1 is an OEM replacement part for Whirlpool refrigerators. This filter works to remove small particles from water to ensure clean, great-tasting ice and drinking water directly from the refrigerator door.  Measuring approximately 2.50 x 2.50 x 8.69 inches, this filter is easy to install. 

For optimal performance, we recommend replacing the filter every six months. The filter material is made from coconut carbon block, which has a micron rating of 0.5 and a flow rate of 0.5 gpm. The filter is designed to operate at a maximum pressure of 125 psi and an operating temperature of 38-100°.

Symptoms of a filter needing replacement include:

• Gradual decline in water/ice quality over time exhibiting muddy appearance or odd tastes
• Filter life indicator appears showing it is time for a new one 

Causes stem from normal usage over the stated capacity of the original filter. Allowing one to expire could produce unhealthy water.

This OEM replacement part is compatible with select Maytag, Jenn-Air, and Amana models as well.

This cover assembly replaces a damaged or cracked pan cover to protect internal components and help contain spills. It restores proper fit and helps prevent debris or moisture from reaching sensitive parts behind the pan. What it does:

• Covers and shields the appliance pan area to protect internal components from debris and moisture
• Helps maintain proper clearance and fit of adjacent panels and components
• Reduces the risk of leaks or drips reaching electrics or insulation when installed correctly
• Useful when the original pan cover is cracked, warped, or missing

• Disconnect power to the appliance before beginning any repair.
• Installation typically requires removing outer panels and fastening the cover with existing screws or clips; keep hardware for re-use unless new hardware is specified.
• Handle the part carefully to avoid cracking plastic tabs; align fitment before tightening fasteners.

The Snack Pan is an OEM part for Whirlpool refrigerators. This pan provides a dedicated space for storing snacks, deli items, and other small food items, making them easily accessible.

Over time, the snack pan may need replacing due to wear and tear, such as cracking, warping, or becoming difficult to slide in and out.

Symptoms of a bad Snack Pan include:

• Difficulty fitting the pan into its designated slot
• Cracks or breaks in the pan material
• The pan not sliding smoothly or getting stuck

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The Drawer Roller is an OEM part for Whirlpool refrigerators, specifically designed to facilitate the smooth and effortless sliding of drawers within the appliance. This small but crucial component ensures that the refrigerator's drawers open and close with ease, allowing for convenient access to fruits, vegetables, meats, and other items stored inside. 

Causes of a bad Drawer Roller can stem from wear and tear over time, accumulation of debris or food particles in the roller mechanism, or damage from overloading the drawer beyond its capacity.  

Symptoms of a bad Drawer Roller include:

• Drawers sticking or jamming when you try to open or close them
• A grinding or squeaking noise during drawer movement
• The drawer sagging or not aligning properly within the refrigerator

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

This pan roller axle fits refrigerator drawers. It's the small support pin that anchors the roller so the crisper or pantry pan glides smoothly. Replacing a damaged axle restores proper glide and keeps the drawer tracking correctly.

• Secures the drawer's roller to the bin or rail so the pan slides smoothly
• Helps keep the crisper/pantry drawer level and properly aligned
• Common symptoms: drawer hard to open/close, sags on one side, scraping/clicking sounds
• Visible damage or a missing axle/roller at the drawer corner

• Unplug the refrigerator, remove contents, and take out the affected drawer
• Locate the broken axle and gently pry/pull it out
• Seat the new axle fully in the mounting hole; ensure the roller spins freely
• Reinstall the drawer and check for smooth operation

The Crisper Pan is an OEM part for Whirlpool refrigerators. This pan is designed to hold and organize fruits and vegetables in the refrigerator, helping to keep them fresh by maintaining the ideal humidity levels. The clear design allows for easy visibility of the stored produce.

Common causes of a bad crisper pan include regular wear and tear, accidental drops or impacts, and overloading the drawer with heavy items.

Symptoms of a bad crisper pan include:

• Cracks or breaks in the pan
• Difficulty in sliding the drawer in and out
• Reduced freshness of stored produce

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Meat Pan is an OEM part for Whirlpool refrigerators. The meat pan helps in organizing the refrigerator and maintaining proper food safety standards by providing a designated space for meats.

Causes of a bad meat pan can include cracks or breaks due to regular use, accidental drops, or overloading the pan with heavy items.

Symptoms of a bad meat pan include:

• Cracks or visible damage
• Difficulty in sliding the pan in and out
• Leaks or spills inside the refrigerator
• The pan not fitting properly in its designated space

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

This replacement slide restores smooth movement and stable support for a drawer or rack guide. It replaces a worn or damaged slide so the rack or drawer tracks properly and reduces sticking or noise during use. What it does:

• Guides and supports a rack or drawer so it moves in and out smoothly
• Helps prevent the rack or drawer from binding, catching, or sagging
• Reduces grinding or scraping noises caused by damaged or worn slides
• Restores proper alignment for secure loading and unloading

• One replacement slide

• Disconnect power to the appliance before beginning work; shut off water supply if the repair affects water connections
• Remove the affected rack/drawer per your model instructions to access the slide
• Compare the old slide to the new part to ensure correct orientation before installing
• Use appropriate hand tools; avoid forcing parts and wear gloves and eye protection