Remington Chipper Shredder Parts

This washer is compatible with most lawn mowers and lawn tractors. The smooth, round edges fit perfectly with 5/8-inch bolts to attach the bolts to parts on the mower, as necessary. The washer provides a buffer between the bolt and the surface that it is being attached to. They are highly recommended for protecting parts that are being fastened together.The lack of a washer can cause permanent damage to the piece that the bolt is attached to. If the bolt does not have a washer to prevent it from moving and rusting, it can cause the bolt to fail. With products such as lawn mowers, this can spell disaster for both the appliance and its handler. These washers are high-quality and will prevent excess corrosion for the bolt. However, moisture and residue left after use can cause the washers to fail. In this case, a replacement will be necessary. This replacement part is compatible with most lawn mowers and tractors. This includes Ace, Ryobi, and MTD. This is an OEM replacement part sourced directly from the manufacturer. Sold individually.

This replacement part is a push rod kit. This is a genuine replacement part made by MTD. This part is commonly found in certain types of lawn mowers and assists the user in maneuvering the machine in the desired direction.A new push rod kit might be needed if the current one is damaged in any way. This might include being bent, dented, cracked, or chipped. If this is the case, the rod might not be able to function properly and should be replaced so that the appliance can return to working order. Be sure the engine is powered down before attempting to replace or repair this part in any way. This is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer.

This replacement part is a stud assembly. This is a genuine replacement part made by MTD. This stud assembly is responsible for keeping the muffler in place and secure so that the lawn mower may operate smoothly and according to the user's preferences. A new stud assembly might be needed if the current one is misplaced or damaged. It is not unusual for the studs to become stripped over time and need to be replaced. If the muffler is no longer able to stay in place, it can be due to the studs and should be looked into. Be sure the engine is completely turned off before attempting to replace this part. This stud assembly is sold individually and is sourced directly from the manufacturer. This part is a genuine OEM replacement part to ensure proper fit and long-lasting use.

This part is a replacement oil seal. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. This part can be used to replace a broken, worn, or defective oil seal in outdoor power equipment. The oil seal helps to prevent oil from leaking from the engine sump. If the user notices an oil leak, this seal may need to be replaced. When working on or near an engine, it is important to make sure the equipment is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this oil seal, the appropriate owner's manual and equipment diagrams should be referred to. As an authentic replacement part, this oil seal is suitable for use on several different models of outdoor power equipment manufactured by MTD, Craftsman, and other brands. Please note that this is a genuine part made of high-quality, durable materials and is sold individually.

This is a genuine carburetor insulator gasket that is designed to fit select models of lawn mowers. The carburetor insulator gasket is responsible for insulating the carburetor to create a strong seal between it and the engine block and insulate it from the excess heat. This gasket is subject to constant pressure and extreme heat, which can cause it to compress, warp, or become otherwise damaged as a result of regular use. Gaskets should be on the routine maintenance schedule and should be inspected every time other repairs are performed. Without functional gaskets, the engine may run poorly or may not run at all. This genuine OEM carburetor gasket is manufactured by MTD. It can be used in select machines from this brand, as well as those from Troy-Bilt, Cub Cadet, HUSKEE, Yard Man, and Yard Machines. There are hundreds of compatible units that take this gasket. The gasket is made of durable composite materials and sold as an individual unit. Hardware and additional components will require another purchase. Be sure to allow the engine to cool and use the appropriate tools for proper installation without damaging the gasket. Always drain the fuel system before working on the carburetor or internal engine components.

This is a high-quality connecting rod assembly that is used in many types of lawn and garden equipment from several manufacturers. It has a metal rod that connects to the crankshaft and piston. The purpose of the connecting rod is to allow pressure and combustion to rotate the engine's output. If this part is damaged or broken, the garden equipment may not work or may not have the desired level of performance. If this happens, the connecting rod assembly should be replaced.A basic set of tools and work gloves will be needed to replace the connecting rod assembly. First, turn off the tool with the damaged rod and put it on a level and sturdy surface. The spark plug wire should be disconnected to prevent the engine from turning on. Access the rod and replace it with the new part before use.The connecting rod assembly is sold as an individual part. It is an authentic OEM replacement component that is sourced directly from the manufacturer. The part is made to be compatible with lawnmowers, wood chippers, snowblowers, log splitters, tillers, and leaf blowers manufactured by MasterCut, Craftsman, Yard-Man, Cub Cadet, Huskee, Troy-Bilt, MTD, and Yard Machines.

This governor spring is a genuine MTD part, sold individually. This governor spring can be used as a replacement part in lawn mowers, tillers, leaf blowers, log splitters, and wood chippers. The purpose of a governor spring for these outdoor appliances is to facilitate the opening and closing of the throttle which helps the appliance maintain its even pace and speed while in operation.The governor spring in an outdoor appliance might have to be replaced if it loses its spring tension. This could occur as the result of a collision with a hard object or due to general wear and tear over long-term use. If this damage prevents the governor spring from serving its typical function, it should be removed and replaced by this genuine OEM replacement part.This OEM part is a genuine replacement that is sold individually and sourced directly from the manufacturer. This governor spring is compatible with the following outdoor appliance brands: MTD, Cub Cadet, Craftsman, Troy-Bilt, Yard Machines, Huskee, Yard Man, and MasterCut.

This recoil spring and pulley assembly is used in a variety of small gasoline engines that power devices such as mowers, lawn tractors, and log splitters, among other yard and landscaping devices. The assembly works by tightly coiling the spring in the starter housing. When the starter rope is pulled, the tension on the spring is suddenly released, creating a spark that fires the air/fuel mixture. The combustion starts the engine. The constant tightening and releasing of the tension at times will cause wear on the spring, resulting in the need to replace the spring and pulley assembly. To replace the recoil starter assembly, begin by removing the housing. Next, untie or starter rope and check to see if it is frayed and needs to be replaced as well. Remove the old assembly and install the new unit. Remember when re-tensioning the spring to wind the pulley in the opposite direction. Holding the pulley tightly so the spring does not release, attach the cap. Reattach the rope and coil it around the pulley. It is advisable to wear gloves for this task because the pulley and springs have sharp edges. This OEM certified replacement assembly is compatible with Yard-Man, Husky, Cub Cadet, MTD, Yard Machines, and Troy-Bilt yard equipment.

This is an oil dipstick assembly that is a crucial part of many types of lawn and garden equipment. The dipstick is made of quality plastic and metal and is located inside the oil fill tube. The purpose of the part is to indicate how much oil is currently in the engine. Regular use can cause this component to wear out or become damaged over time. When this occurs, it's not possible to determine how much oil is present so the oil dipstick assembly will need to be replaced.Replacing the oil dipstick assembly is a simple and quick process. No tools are needed to make the replacement. Turn off the equipment and access the oil fill tube. Unscrew and remove the old oil dipstick tube before replacing it with the new component. The equipment can then be used as normal.This oil dipstick assembly is a genuine OEM replacement part that is directly sourced from the manufacturer. The part is sold on an individual basis. This component is made for use with lawnmowers, snowblowers, tillers, leaf blowers, log splitters, and wood chippers created by MasterCut, Yard-Man, Huskee, MTD, Yard Machines, Troy-Bilt, Cub Cadet, and Craftsman.

This carbon canister is a device used to control the amount of gas pollution that is released from small engines found in various lawn and garden machines. This is a genuine OEM replacement part that is sourced from the manufacturer. It is an emission control device also known as a charcoal canister. As gas evaporates from the fuel tank, the carbon canister catches the fumes and releases them into the engine so that they are not dispersed into the atmosphere. Age and regular use may cause the canister to crack or break and not hold the fumes inside. Typical signs that the canister needs replaced include strong fuel odors or leaking from the canister. If the canister is flooded by fuel, the canister will not operate properly. Fuel will spill out, and the canister will need to be replaced. Before replacing the carbon canister, empty the fuel from the machine and remove the spark plug wire for added safety. This repair should be made in a well-ventilated area.The carbon canister is made from heavy-duty plastic and is sold as an individual unit. It is compatible with tillers, chippers, and other small engines manufactured by MTD, Cub Cadet, Yard Machines, and Troy-Bilt.

This is a starter recoil assembly. It is used when starting small lawn equipment and other machines. It engages the flywheel. With time and use, any or all of the recoil can wear out or become damaged, including the spring, housing, rope, or pulley. If something is damaged or worn out, the entire starter recoil assembly must be replaced. Signs that the part requires a repair include an engine that won't start or has difficulty engaging.Replacing a starter recoil assembly is easy and can be done in about 15 minutes. A nut driver and screwdriver are required for the repair. Wear gloves. Make sure the equipment is completely cooled before beginning the recoil assembly replacement. After putting tension on the spring and pulley, hold the housing securely to prevent it from releasing.The starter recoil assembly is a genuine OEM-authorized replacement part. It is sold individually. The starter recoil assembly is compatible with MTD, Cub Cadet, Yard Machines, Husky, Yard-Man, and Troy-Bilt brands. It is a complete part that includes the housing, rope, pulley, and recoil spring. It works with small engines, lawnmowers, log splitters, trimmers, and other similar equipment.

This part is a carburetor gasket. A carburetor mixes fuel and air before delivering it to the engine. The carburetor gasket creates a seal between the carburetor and cylinder that ensures that air is where it's supposed to be.The carburetor gasket may need to be replaced if the seal is broken and it is allowing air in. If there is a slight leak, the operator may notice engine roughness when it's at idle. A larger leak will cause the engine to vibrate, misfire, or hesitate under acceleration. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment machines.This part is a genuine MTD part and is an OEM part sourced directly from the manufacturer. It it is sold individually. This carburetor gasket is compatible with engines, lawnmowers, log splitters, and trimmers manufactured by MTD, Yard Machines, Yard-Man, Cub Cadet, Husky, and Troy-Bilt.

This genuine MTD carburetor assembly provides all of the components to replace a carburetor, including the fastening elements. The purpose of a carburetor is to combine the fuel and air intake into a particular ratio that is ignited by the spark plugs to run the engine. This carburetor assembly contains the carburetor itself and the primer bu. The carburetor assembly might have to be ordered as a complete replacement if there is damage to the carburetor that also affects the fastening parts that attach the carburetor to the engine. If the damage cannot be attributed to a smaller part, the full carburetor assembly should be ordered as a replacement for the damaged carburetor and its attachments. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This carburetor assembly is compatible with log splitters and chipper shredders made by the following brands: MTD and Cub Cadet. This part is sold individually.