Remington Lawn Mower Parts

This is a genuine replacement ignition key that is manufactured by MTD for use in select models of outdoor power equipment. The ignition key is a plastic piece that is inserted into the ignition cylinder to start the machine. Turning the plastic key will signal to the engine to fire. This is a durable plastic piece, but it can become damaged or lost over time, which will render the machine unable to start. Replacing it will be necessary in order to operate the unit. This genuine OEM ignition key is manufactured to exact standards. It can be used in snowblowers and snow throwers from MTD, Yard Machines, Troy-Bilt, Cub Cadet, Yard-Man, and Husky. The durable plastic key is sold as an individual unit and does not require any tools for installation. This is a simple replacement that should only take a couple of minutes. In the event that the old key is damaged or stuck in the ignition, it may take more effort. It is important to disconnect the power supply for safety before performing any repairs, as well as to wear gloves for hand protection.

Fuel line kit for small engines. Carries fuel through the machine. Replace if cracked, leaking, or ends don't fit securely even when clamped down.

Carburetor choke knob for snow thrower engines. Replaces cracked, broken, or missing choke control knobs. Installs on the carburetor assembly.

Primer hose for snow thrower engines. Connects the primer bulb to the carburetor. Replace if cracked, brittle, or leaking fuel during priming.

This is a plastic fuel tank that stores gasoline for a small engine used in lawn and garden equipment. It connects to the fuel line and carburetor to supply fuel for combustion. Replace this tank if it is cracked, leaking fuel, or has become warped or brittle from age and sun exposure.

Fix a starter that won't pull freely or spin the flywheel fast enough. This metal-housed recoil starter assembly fits multiple MTD engine models.

Blade removal tool for lawn mowers and garden tractors. Safely holds the blade in place during removal or installation. Replace if damaged or missing.

Replace your snowblower's clutch handle assembly if the original is cracked, broken, or worn. This handle installs on the control panel for operator control.

This 25mm drive pulley serves as a blade adapter that connects the cutting blade to the drive shaft of a lawn mower. It ensures the blade is securely mounted and spins properly during operation. Replace this adapter if the blade wobbles, does not seat correctly on the shaft, or if the adapter keyway or mounting hole is worn or damaged.

Carriage bolt fastener for lawn and garden equipment. Replaces worn, stripped, or missing bolts that secure deck components and attachments.

The shoulder screw is used in places where a spacer or bearing surface is needed, since the top half of the screw is unthreaded. These fasteners are often used for guides, pivot points, mounting pins, axles, and even a shaft for bearings and bushings in various MTD engines. With regular use, the screws can wear down or be lost. Always repair the missing hardware promptly with genuine OEM replacements. Disengage the spark plug and wear gloves when performing work on engines for safety. This genuine OEM replacement shoulder screw has been designed to be compatible with machines from MTD, Troy-Bilt, Yard-Man, Yard Machines, Bolens, Cub Cadet, and Craftsman. It can be used for multiple applications and in multiple locations in different models of lawnmowers, tractors, and chippers that use the screw in various applications. Check your parts diagrams for the exact location and use of these screws before ordering. This is sold as an individual unit; order multiple quantities as needed.

This flange lock nut is a metal component used in many types of lawn and garden equipment. It is the part that attaches to the rear wheel to keep it steady on any kind of terrain. It can also be used on handles and chutes for some equipment. The nut size is 3/8 and it has a thread size of 16. Most flange lock nuts will last for years. In some cases, the silicone ring inside the nut will wear down when it is loosened and tightened. When this happens, the flange lock nut will start to move around. It can start as minor slippage but often gets worse over time. It will need to be replaced but this is a simple task. Regardless of what equipment it is attached to, it simply needs to be unscrewed. Take off the old nut and replace it with the new one. This flange lock nut is an authentic OEM product that is sourced directly from the manufacturer. It is sold individually. The lock nut is made for use with lawnmowers, wood chippers, and edgers manufactured by MasterCut, Yard-Man, Bolens, Craftsman, Cub Cadet, Murray, Troy-Bilt, Yard Machines, MTD, and Huskee.

Dowel pin fastener for gas snowblowers. Secures components in place during operation. Replace if missing, bent, or sheared to restore proper assembly.

Height adjustment knob for walk-behind lawn mowers. Replaces broken, cracked, or missing knobs that control cutting deck height settings.

Lower chute assembly for snowblowers. Directs snow discharge from the impeller. Replace if cracked, broken, or missing for proper snow routing.

Replacement battery cover for walk-behind mowers. Installs over the battery compartment to shield it from debris and moisture. Replace if cracked or missing.