Ryobi Parts

This fuel cap is a genuine MTD part, sold individually. This fuel cap can be used as a replacement part in a lawn mower, snowblower, or wood chipper. This fuel cap seals the fuel tank on these types of equipment.The fuel cap in a lawn mower, snowblower, or wood chipper might need to be replaced if the component is chipped, dented, punctured, or otherwise damaged. If this damage leads to a fuel cap through which materials can pass, the fuel cap should be removed and replaced by this genuine OEM replacement part.This OEM part is a genuine replacement that is sold individually and sourced directly from the manufacturer. This fuel cap is compatible with the following outdoor appliance brands: MTD, Cub Cadet, Craftsman, Ryobi, Troy-Bilt, Yard Machines, Huskee, Montgomery Wards, Bolens, Yard Man, Turf King, and MasterCut.

This casing clamp is a genuine MTD part, sold individually. This casing clamp can be used as a replacement part in lawn mowers, snowblowers, and tillers. The purpose of a casing clamp for one of these outdoor appliances is to affix the governor control plate to the tank assembly so that it remains stably placed throughout the standard operation of the appliance.If the casing clamp is subject to damage in the form of puncturing, denting, cracking, warping, or eroding over time, it should be removed and replaced by this genuine OEM replacement part.This is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This casing clamp is compatible with the following outdoor appliance brands: MTD, Craftsman, Ryobi, Cub Cadet, Troy-Bilt, Murray, Yard Machines, Huskee, Montgomery Wards, Yard Man, Bolens, and MasterCut.

This ignition module is a genuine MTD part, sold individually. This ignition module can be used as a replacement part in a tiller or an edger. The purpose of the ignition coil in a tiller or an edger is to fire the spark plugs so that the engine can be powered on.The ignition module in a tiller or an edger might stop functioning at some point within the standard lifespan of the appliance; this could occur as a result of general wear and tear, exposure to the elements, or a collision with a hard object that damages the component beyond functionality. If the ignition module no longer fires up the spark plugs when it is supposed to do so, the ignition module should be removed and replaced by this genuine OEM replacement part before using the tiller or edger again.This OEM part is a genuine replacement that is sold individually and sourced directly from the manufacturer. This ignition module is compatible with the following outdoor appliance brands: MTD, Cub Cadet, Ryobi, Craftsman, and Troy-Bilt.

This part is a replacement gearbox assembly. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. It is intended to replace a defective or broken gearbox assembly in various models of tillers.The gearbox assembly is essential to the tiller's functionality as it is what rotates the tine shaft in order to spin the tines themselves. If the current gearbox is worn, malfunctioning, or otherwise broken, it will need to be replaced immediately. Wear work gloves to protect the hands and check that equipment is powered off and cooled down before starting the repair process. For more accurate information on how and where to use this gearbox assembly, the appropriate owner's manual and equipment diagrams should be referred to. This gearbox assembly is a genuine OEM part made of durable metal and is sold individually. It is suitable for use with tiller models that have been manufactured by MTD, Craftsman, Troy-Bilt, and other brands.

This throttle trigger is designed to open and close the throttle, or to control the speed of the engine. This part is mounted to the control handle on the equipment's shaft. With constant use, the throttle trigger may break or wear out. Use this genuine OEM throttle trigger in red to easily replace a damaged one. A screwdriver and long-nose pliers will be needed for the job. This OEM replacement throttle trigger is compatible with specific models of edgers and trimmers from Bolens, Craftsman, Cub Cadet, MTD, Ryobi, Troy-Bilt, and Yard-Man. It is sold individually.

This throttle housing & trigger assembly is a genuine MTD replacement part for a handheld gas lawn trimmer. A lawn trimmer is designed to cut grass, shrubs, bushes, and weeds. The throttle housing & trigger assembly is a kit containing a black plastic throttle housing, a trigger, a spring, and the screws to bind the pieces together. The function of a throttle housing is to house the throttle for the lawn trimmer, which spins the blades at specific velocities, with a full throttle corresponding to full blade velocity. The trigger assembly consists of the trigger itself, the hammer, the disconnector, and the springs, and the function of the trigger is to activate the engine, thereby engaging the throttle.In order to replace the throttle housing, the engine must not be running and the oil should be emptied from the tank. If the throttle housing & trigger assembly is damaged to the point that the lawn trimmer is unusable, the throttle housing & trigger assembly should be removed and replaced immediately. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This throttle housing & trigger assembly is compatible with the following brands: MTD, Troy-Bilt, Yard Man, and Bolens. This part sold individually.

This recoil spring is used as part of the starting mechanism for gasoline power tools such as cultivators, leaf trimmers, edgers, power vacuums, and blowers. These devices do not use battery-powered starters and thus must rely on magneto armatures and rope pulls. The recoil spring is attached to the rope pull and returns the rope to its proper place after being pulled. The coil spring receives a tremendous amount of torque again and again over time, and through aging and stretching, the spring will become inoperable and need to be replaced. Signs the recoil spring has weakened include a slackened pull from the starter rope that does not allow the engine to start or an absolutely slack pull rope. Replacing the recoil spring is a matter of detaching the pull rope and removing the starter housing. Remember to wind the pull rope around the new coil spring to allow the proper amount and length of rope. It will have to be steadied in place as the starter housing is refastened. Always use a genuine OEM replacement part, such as this one, in order to get parts that are identical to the originals. The coil is compatible with tools branded by Cub Cadet, Yard-Man, Ryobi, Bolens, MTD, and Yard Machines.

This nut is a genuine MTD part, sold individually. This nut can be used as a replacement part in tillers, string trimmers, leaf blowers, and edgers. The purpose of a nut for one of these small engine outdoor appliances is to work in conjunction with a bolt to serve as a fastening component.Because of their size, nuts can be easily lost or misplaced. They may also become stripped from wear and tear with long-term use. If a nut is lost, misplaced, or cannot serve its critical function as a fastening component within the appliance, it should be removed and replaced by this genuine OEM replacement part.Sourced directly from the manufacturer, this component is a genuine replacement part that is sold individually. This nut is compatible with the following outdoor appliance brands: MTD, Craftsman, Cub Cadet, Ryobi, Troy-Bilt, Murray, Yard Machines, Bolens, and Yard-Man.

This is a genuine ignition module, also known as an ignition coil, that is designed to be used on select line trimmers. The ignition module is what connects the spark plug to the machine and is responsible for creating the spark and carrying that power back to the engine to power the unit. if the ignition module fails, the engine will not be able to start. It could start and stop, or it could fail to start entirely. Either way, replacing the ignition module will resolve the issue in most cases and can be done with this OEM part. Since it's attached to the spark plug, it's a good idea to inspect the module during regular spark plug replacement and other maintenance to check for damage. The ignition module is made from durable metal and rubber materials and is sold as an individual part. It will require a screwdriver and socket set to replace the part. Be sure to wear gloves to protect the hands and disconnect the power for safety before doing any work on electrical components like this.

This carburetor assembly can be used as a replacement part for the small engine of a string trimmer, a chainsaw, or an edger. The carburetor assembly contains a replacement carburetor and the components required to facilitate the replacement and installation of the carburetor. The purpose of the carburetor is to create a mixture of the fuel and air that the engine takes in and channel it through the network of valves to the spark plugs, which ignite and power up the engine.A carburetor might have to be replaced if it is damaged to the point of exhibiting the following symptoms, among others: black smoke pluming from the exhaust, reduced fuel economy, misfires and false starts of the engine, and oil leakages stemming directly from the carburetor. If this is the case, this carburetor assembly should be ordered as a replacement. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer, MTD. It is sold individually. This carburetor assembly is compatible with the following brands: MTD, Troy-Bilt, Ryobi, and Yard Man.

This is an extension boom and flex shaft assembly that is used in pole pruners and string trimmers. It is made to offer extra extensions so the pruner or trimmer can be used on items farther away from the user. It adds additional reach to make yard and garden tasks easier. The tube comes with an internal flexible drive shaft. It arrives to the user in a pre-assembled state and is ready to be installed. This shaft assembly can be used to replace a broken part or purchased to add reach to a pruner or trimmer that didn't come with one.This boom and flex shaft assembly requires no tools to be installed. Make sure the equipment it will be installed on is turned off, and the spark plug wire has been disconnected. Access the shaft and remove the broken boom and flex shaft assembly. The new replacement part can be installed by hand.This is an authentic OEM replacement part that is directly sourced from the manufacturer. It is sold as an individual component. The extension boom and flex shaft assembly is designed to be used with string trimmers and pole pruners manufactured by MTD and Ryobi.

This is a vacuum bag that is a genuine manufacturer replacement part from MTD. The bag is used on select models of vacuums and blower/vacs to collect the debris that is swept up by the unit. The bag is made of durable canvas material and features a reinforced connection to the unit. Over time, however, the bag may develop a tear or the connection to the hose could become damaged. This could require replacement of the entire bag. To install the bag, simply remove the adapter and take the old bag off of the unit. Then, put the new bag into place, replace the adapter, and test the unit to make sure that the bag is secure. Always wear gloves when performing repairs and make sure the unit is not operational for safety. There are no tools required for the replacement of this bag.This OEM vacuum bag replacement is designed to be used in select leaf blowers and vacuums from MTD, RYOBI, Troy-Bilt, and Yard-Man. The bag is sold individually and does not include the adapter that attaches the bag to the housing.